Search

The dry reforming of glycerol (GDR) is one of the alternatives for syngas production by utilizing biodiesel byproduct glycerol and CO 2. The development of highly active and stable catalyst is significantly important to achieve GDR process, and the current work provides insights into Co and Fe-doping effects of mesoporous CeO 2 (CoFeCe) catalysts synthesized by the colloidal solution combustion method. The prepared catalysts presented the uniform mesoporous structure, the doping of Co and Fe metals resulted in stronger metal-support interaction. The GDR experimental data were compared with the non-stoichiometric thermodynamic equilibrium values. The conversions of glycerol and CO 2 were increased with increasing the reaction temperatures due to the endothermic GDR reaction, and the H 2 /CO produced in syngas was in the range of 0.7–1.4. Due to the improvement of Co and Fe metals in the mesoporous structure of CeO 2 catalyst, the 7CoFeCe catalyst exhibited excellent and stable GDR performance and no significant signs of deactivation were observed during 76 h test, and the results indicated that the enhanced interaction and high dispersion of Co and Fe in mesoporous CeO 2 catalyst could inhibit carbon formation and promote GDR reaction. [Display omitted] • Co and Fe co-doping on CeO 2 catalyst enhanced GDR reactions. • Increasing in Co-doping improved conversions of glycerol and CO 2 to syngas. • Co–Fe interaction and CeO 2 redox ability inhibited the formation of carbon. • Catalyst with CoFeCe of mole ratio 7: 5:10 exhibited high activity and stability. [ABSTRACT FROM AUTHOR]

The Ni-based multifunctional catalysts for the sorption-enhanced steam reforming process (SERP) with simultaneous in-situ CO 2 removal were synthesized by the co-precipitation method with rising pH technique, and the crystalline spinel phases of NiAl 2 O 4 and MgAl 2 O 4 in the catalysts were formed under the calcination temperature of 900 °C. The catalysts were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), thermo-gravimetric analysis (TGA), and N 2 adsorption-desorption. Nonisothermal and isothermal CO 2 sorption experiments were carried out to evaluate the activity of catalysts for CO 2 removal. Desorption and optimum sorption temperatures for CO 2 removal were determined. Hydrogen production from SERP of glycerol over the multifunctional catalysts has been experimentally evaluated under 550 °C and steam to carbon (S/C) ratio of 3. The multifunctional catalyst with the composition of 41.21 wt% NiO, 28.02 wt% Al 2 O 3 and 30.77 wt% CaO presented satisfactory hydrogen purity in the multi-cycles of reforming and regeneration processes. Enhanced hydrogen production was mainly depended on in-situ CO 2 removal, and the operation durations for producing high purity hydrogen in the initial 30 min were relatively stable. The multifunctional catalyst possesses uniform distribution of Ni, Ca and Al, contributing significantly to the excellent CO 2 sorbent capacity and reforming activity. This multifunctional catalyst synthesized offers a new scheme other than the conventional mixture of sorbent and catalyst for SERP. [ABSTRACT FROM AUTHOR]

In this study, the continuous sorption-enhanced steam reforming of glycerol to high-purity hydrogen production by a simultaneous flow concept of catalyst and sorbent for reaction and regeneration using two moving-bed reactors has been evaluated experimentally. A Ni-based catalyst (NiO/NiAl2O4) and a lime sorbent (CaO) were used for glycerol steam reforming with and without in-situ CO2 removal at 500 °C and 600 °C. The simultaneous regeneration of catalyst and sorbent was carried out with the mixture gas of N2 and steam at 900 °C. The product gases were measured by a GC gas analyzer. It is obvious that the amounts of CO2, CO and CH4 were reduced in the sorption-enhanced steam reforming of glycerol, and the H2 concentration is greatly increased in the pre-CO2 breakthrough periods within 10 min both 500 °C and 600 °C. The extended time of operation for high-purity hydrogen production and CO2 capture was obtained by the continuous sorption-enhanced steam reforming of glycerol. High-purity H2 products of 93.9% and 96.1% were produced at 500 °C and 600 °C and very small amounts of CO2, CH4 and CO were formed. The decay in activity during the continuous reaction-regeneration of catalyst and sorbent was not observed. [ABSTRACT FROM AUTHOR]

Abstract: H2 production from glycerol steam reforming by the Ni–Cu–Al, Ni–Cu–Mg, Ni–Mg catalysts was evaluated experimentally in a continuous flow fixed-bed reactor under atmospheric pressure within a temperature range from 450 to 650 °C. The catalysts were synthesized by the co-precipitation methods, and characterized by the elemental analysis, BET, XRD and SEM. The GC and FTIR were applied to analyze the products from steam reforming of glycerol. The coke deposited on the catalysts was measured by TGA experiments during medium temperature oxidation. The results showed that glycerol conversion and H2 production were increased with increasing temperatures, and glycerol decomposition was favored over its steam reforming at low temperatures. The Ni–Cu–Al catalyst containing NiO of 29.2 wt%, CuO of 31.1 wt%, Al2O3 of 39.7 wt% performed high catalytic activity, and the H2 selectivity was found to be 92.9% and conversion of glycerol was up to 90.9% at 650 °C. The deactivation of catalysts due to the formation and deposition of coke was observed. An improved iterative Coats–Redfern method was used to evaluate the non-isothermal kinetic parameters of coke removal from catalysts, and the results showed the reaction order of n = 1 and 2 in the Fn nth order reaction model predicted accurately the main phase in the coke removal for the regeneration of Ni–Mg and Ni–Cu–Al catalysts, respectively. [Copyright &y& Elsevier]

Abstract: Hydrogen production from steam reforming of glycerol in a fluidized bed reactor has been simulated using a CFD method by an additional transport equation with a kinetic term. The Eulerian–Eulerian two-fluid approach was adopted to simulate hydrodynamics of fluidization, and chemical reactions were modelled by laminar finite-rate model. The bed expansion and pressure drop were predicted for different inlet gas velocities. The results showed that the flow system exhibited a more heterogeneous structure, and the core-annulus structure of gas–solid flow led to back-mixing and internal circulation behaviour, and thus gave a poor velocity distribution. This suggests the bed should be agitated to maintain satisfactory fluidizing conditions. Glycerol conversion and H2 production were decreased with increasing inlet gas velocity. The increase in the value of steam to carbon molar ratio increases the conversion of glycerol and H2 selectivity. H2 concentrations in the bed were uneven and increased downstream and high concentrations of H2 production were also found on walls. The model demonstrated a relationship between hydrodynamics and hydrogen production, implying that the residence time and steam to carbon molar ratio are important parameters. The CFD simulation will provide helpful data to design and operate a bench scale catalytic fluidized bed reactor. [ABSTRACT FROM AUTHOR]

The research describes the synthesis of nanocomposite Ni@ZrO 2 oxygen carriers (OCs) and lanthanide doping effect on maintaining the platelet-structure of the nanocomposite OCs. The prepared OCs were tested in chemical looping reforming of glycerol (CLR) process and sorption enhanced chemical looping reforming of glycerol (SE-CLR) process. A series of characterization techniques including N 2 adsorption-desorption, X-ray diffraction (XRD), inductively coupled plasma optical emission spectrometry (ICP-OES), high resolution transmission electron microscopy (HRTEM), H 2 temperature-programmed reduction (H 2 -TPR), H 2 pulse chemisorption and O 2 temperature-programmed desorption (O 2 -TPD) were used to investigate the physical properties of the fresh and used OCs. The results show that the platelet-stack structure of nanocomposite OCs could significantly improve the metal support interaction (MSI), thus enhancing the sintering resistance. The effect of lanthanide promotion on maintaining this platelet-stack structure increased with the lanthanide radius, namely, La 3+ > Ce 3+ > Pr 3+ > Yb 3+ . Additionally, the oxygen mobility was also enhanced because of the coordination of oxygen transfer channel size by doping small radius lanthanide ions. The CeNi@ZrO 2 showed a moderate ‘dead time’ of 220 s, a high H 2 selectivity of 94% and a nearly complete glycerol conversion throughout a 50-cycle CLR test. In a 50-cycle SE-CLR stability test, the CeNi@ZrO 2 CaO showed high H 2 purity of 96.3%, and an average CaCO 3 decomposition percentage of 53% without external heating was achieved. [ABSTRACT FROM AUTHOR]