Search

In this study, AA7075/SiC/TiB2 closed-cell aluminium hybrid composite foams (AHCFs) with different densities were fabricated by top-loaded bottom-pouring stir casting technique. This technique uses oyster-shell powders (CaCO3 2.5 wt% of composite with 60 μm size) as blowing agents and no viscosity-enhancing ingredient. The silicon carbide (SiC 0, 3, 6, 9, and 12 wt% with 25 μm) and titanium diboride (TiB2 3 wt% with particle size 15 μm) are used as primary and secondary reinforcement agents. It has been noted that the addition of TiB2 and SiC enhanced the mechanical properties (modulus of elasticity, yield strength, and plateau strength) of AHCFs. The energy absorption capacity of AHCFs increases with the addition of SiC up to 3 wt%, and a further increase in SiC content leads to the reduction. It is observed that density and cell wall thickness increase with increasing the wt% of SiC and pore size, porosity decrease with an increase in wt%. of reinforcement. It is also noted that stirring temperature also strongly influenced the microstructural properties of AHCFs, and 750 °C of stirring temperature is sufficient for aluminium foaming. [ABSTRACT FROM AUTHOR]