Search

Purpose: The purpose of this paper is to apply two optimization methods to the issue of sensible energy store design. Design/methodology/approach: This paper is a comparison of topology optimization and genetic algorithms. Findings: Genetic algorithms are prone to converge to local maxima while requiring significantly longer convergence times compared to topology optimization. Topology optimization resulted in structures representing parallel sheets, which are as thin as the grid allows. These configurations can maintain the maximum surface area between the low and high conductivity materials at high refinement, resulting in the best performance. Practical implications: Time required for 99 per cent store discharge is decreased by 70 per cent using a 50 × 50 optimization grid at a loading of 10 Vol.%. Originality/value: These approaches have not been compared nor applied to this specific problem before. Value is in the key finding that maximization of surface area is only possible with fins/sheets and not tree structures. This dictates the optimal solution for dynamic behaviour. [ABSTRACT FROM AUTHOR]

Purpose The purpose of this paper is to investigate the optimal geometry parameters in a dimple/protrusion-pin finned channel with high thermal performance.Design/methodology/approach The BSL turbulence model is used to calculate the flow structure and heat transfer in a dimple/protrusion-pin finned channel. The optimization algorithm is set as Non-dominated Sorting Genetic Algorithm II (NSGA-II). The high Nusselt number and low friction factor are chosen as the optimization objectives. The pin fin diameter, dimple/protrusion diameter, dimple/protrusion location and dimple/protrusion depth are applied as the optimization variables. An in-house code is used to generate the geometry model and mesh. The commercial software Isight is used to perform the optimization process.Findings The results show that the Nusselt number and friction factor are sensitive to the geometry parameters. In a pin finned channel with a dimple, the Nusselt number is high at the rear part of the dimple, while it is low at the upstream of the dimple. A high dissipative function is found near the pin fin. In the protrusion channel, the Nusselt number is high at the leading edge of the protrusion. In addition, the protrusion induces a high pressure drop compared to the dimpled channel.Originality/value The originality of this paper is to optimize the geometry parameters in a pin finned channel with dimple/protrusion. This is good application for the heat transfer enhancement at the trailing side for the gas turbine. [ABSTRACT FROM AUTHOR]