Search

The aim of this study was to clarify the clinical significance of bone metabolism in the mandibular condyles in determining condylar resorptive changes. Twelve condyles of patients with idiopathic condylar resorption and degenerative joint disease were analysed using

This study aims to assess the postoperative condylar displacement and the long-term condylar remodelling in patients with mandibular prognathism with transverse asymmetry after bilateral sagittal split ramus osteotomy (BSSRO). Forty-one consecutive patients (82 condyles) with a transverse mandibular asymmetry of more than 4 mm without occlusal canting treated by BSSRO were included. The preoperative (T1), immediate postoperative (T2) and long-term follow-up of an average of 16.2 months (T3) spiral computed tomography scans were gathered and processed to measure the condylar displacement and remodelling based on cranial base voxel-based and rigid regional registrations. The statistical analysis revealed that the majority of condyles (T1-T2) were transitionally displaced forwards, downwards and laterally, and were not fully returned to the preoperative position at T3. Condylar lateral displacement was significantly higher on the deviated side (DS) (P = 0.035). Non-deviated side (NDS) condyles were mainly subjected to upward pitch, medial yaw and medial roll compared with downward pitch, lateral yaw and lateral roll on DS. Condylar remodelling at T3 was observed, with the superior and posterior surfaces commonly subjected to bone resorption, whereas the anterior and medial surfaces were commonly subjected to bone apposition. Condylar volumetric changes were relatively comparable on NDS (3 ± 85.2 mm3) and DS (8.3 ± 111.7 mm3) condyles. Age, amount of preoperative asymmetry and follow-up period were not correlated with the condylar remodelling. Transitional and rotational displacements were to some extent significantly correlated with the condylar remodelling on both sides. Consequently, passive condylar seating without torque might prevent the long-term unfavourable condylar remodelling.

The need for secondary orthognathic surgery (OS) after a high condylectomy (HC) in patients with active unilateral condylar hyperplasia was assessed in 25 patients, reviewing patient characteristics and treatment planning. At 6-12 months after HC, 13 patients (52%) required secondary OS. The amount of mandibular dental midline shift before the HC (P=0.037), and a dental crossbite that was present before the HC (P=0.017) were significantly associated with the need for secondary OS. Overall, the mandibular dental midline coincided with the facial midline in eight patients (32%) at 2 weeks after HC. In 16% of the patients, no additional OS was needed despite this being the initial treatment plan. Additionally, the initially planned type of secondary OS was modified in six other patients. Early HC in skeletally immature patients provided very good results, both aesthetic and functional, with only two of them needing supplementary OS at 6-12 months after HC. The HC remains a valuable treatment in patients with active unilateral condylar hyperplasia, as it can eliminate the need for secondary OS and is very well tolerated by most patients. ispartof: INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY vol:51 issue:2 pages:206-213 ispartof: location:Denmark status: published

Subcondylar fracture of the mandible accounts for 25-35% of all mandibular fractures. In the past, most subcondylar fractures were managed non-surgically. The traditional method of fixation for subcondylar fractures uses two miniplates; however some bench studies have reported that trapezoidal plates are superior. The aim of this study was to compare the outcomes of subcondylar fractures fixed either with two non-parallel straight miniplates or with one trapezoidal plate. A randomized clinical trial was designed and implemented. Fifty-two consecutive patients with subcondylar fractures were recruited. All patients underwent surgery via a retromandibular approach. The time taken for fixation of the plate after fracture reduction and postoperative outcomes and complications were compared between the groups. The trapezoidal plates were superior in terms of ease of adaptation and time taken for fixation (P= 0.0001). Plate fracture was observed only in the two miniplates group, in four (16%) patients. Outcomes were similar in the two groups in terms of occlusion, mouth opening, protrusion, and lateral excursion. In conclusion, both systems - two miniplates and the trapezoidal plate - provide functionally stable fixation. The outcome was significantly better for the trapezoidal plate than for two miniplates regarding the time taken for insertion and ease of adaptation, but not for other parameters.

The management of temporomandibular joint (TMJ) ankylosis requires complete removal of the ankylosed block and the prevention of recurrence. For this purpose, the ramus-condyle unit can be reconstructed with a second metatarsal free flap. This article reports the use of this flap in a young patient treated for left TMJ ankylosis, post costochondral graft for the treatment of hemifacial microsomia. Data from the 10-year follow-up are reported. The glenoid fossa was reconstructed with a graft of the second metatarsal base, enabling the juxtaposition of two cartilaginous joint surfaces, with the aim of optimizing the functional result and preventing the recurrence of ankylosis. At the 10-year follow-up after this surgery, there was no recurrence of the ankylosis and no articular disorder, and the morphological result was satisfactory. Bone fixation was stable over the 10-year period and the metatarsal head was still in place. Quantitative measurements obtained by computed tomography scan did not show any growth of the second metatarsal free flap compared to the right unaffected condylar process.

The bilateral sagittal split osteotomy (BSSO) and high oblique sagittal split osteotomy (HSSO) are common techniques for mandibular movement in orthognathic surgery. The aim of this study was to evaluate the influence of both techniques, as well as movement distances and directions, on the position of the temporomandibular joint (TMJ). A total of 80 mandibular movements were performed on 20 fresh human cadaver heads, four on each head. Pre- and postoperative cone beam computed tomography was used to plan the surgical procedure and analyse the TMJ. Reference measurements included the anterior, superior, and posterior joint spaces, intercondylar distances and angles in the axial and coronal planes, and the sagittal, coronal, and axial angulations of the proximal segment. Only minor differences were found between the BSSO and HSSO techniques, particularly in terms of the intercondylar angle in the axial plane (P 0.03) and the condylar angle of the proximal segment in the sagittal plane (P 0.011). Observed changes in the TMJ were mostly opposite when moving the mandible forwards and backwards and increased with increasing movement distance. BSSO and HSSO result in similar changes in TMJ position. The extent of the movement distance influences the position of the condyle more than the osteotomy technique.

Temporomandibular joint ankylosis (TMJA) is a complicated condition that affects not only the condyle, but also the maxillofacial complex. Thus, it is often challenging to find a standardized treatment strategy for TMJA. This study was performed to analyse our experience with 95 TMJA patients over a 4-year period and develop a new classification system (‘CDA’). The CDA classification system divides TMJA patients into eight different groups according to the preservability of the condyle (C), severity of the dentofacial bone deformity (D), and skeletal age (A). The 95 patients (129 ankylosed joints) were treated using different strategies based on this CDA classification. Treatment options included preserving or reconstructing the condylar head, surgical correction of jaw deformities, and close follow-up of mandibular growth. After treatment, all 129 ankylosed joints were completely released and the average maximum inter-incisal opening (MIO) increased from 3.6 ± 3.2 mm to 32.8 ± 5.4 mm, with no recurrence of ankylosis found during follow-up. In conclusion, this new CDA classification can effectively guide treatment strategies for TMJA patients. Using particular strategies for patients based on specific CDA classifications could provide optimal management to the benefit of TMJA patients.

The aim of this study was to describe the steps of a minimally invasive surgical technique used to perform a proportional intraoral condylectomy with a three-dimensionally (3D) printed cutting guide. The technique consists of two steps: virtual surgical planning and intraoral condylectomy. During virtual surgical planning, the mandibular ramus was measured bilaterally, the height of the proportional condylectomy was planned virtually, and a cutting guide was 3D printed. In the intraoral condylectomy, the mandibular condyle was approached intraorally, the 3D printed cutting guide was positioned in the sigmoid notch, and the proportional condylectomy was performed. The protocol reported in this technical note is the sum of knowledge acquired from a series of studies published previously by the authors, who have jointly developed a surgical technique that is both minimally invasive and accurate for the treatment of condylar hyperplasia.

After sagittal split osteotomy, the mandibular distal and proximal fragments do not always align themselves passively to one another, resulting in bony interferences and subsequent anomalous settlement of the condyles. Predicting these interferences could be an important ancillary procedure for avoiding intra- and postoperative surgical complications, rendering orthognathic surgery more effective and safer. This study evaluated the relevance of virtual surgical planning in assessing the displacement of the proximal segments after virtual distal segment repositioning, for predicting bony interferences between the segments and thus avoiding related intra- and postoperative surgical complications. The presence of interferences between the distal and proximal segments was compared between virtually predicted (computer-assisted simulation surgery, Dolphin software) and real cases in 100 consecutive patients diagnosed with dentofacial deformities who underwent orthognathic surgery with mandibular repositioning (using a short lingual osteotomy (SLO)). The results indicated that clockwise rotation of the mandible was the mandibular movement most prone to segment interference. Furthermore, virtual planning was sensitive (100%) but had low specificity (51.6%) in predicting proximal and distal segment interferences. This low specificity was due to the software-based automated design of the mandibular osteotomy, where the length of the distal segment was longer than the real SLO, and the mandibular ramus sagittal split was located just behind Spix's spine. Thus, more precise simulated osteotomies are needed to further validate the accuracy of virtual planning for this purpose.

The aim of this study was to investigate the quantitative association between active/passive maximum mouth opening (AMMO/PMMO) and the severity of simulated temporomandibular joint (TMJ) bony ankylosis. Twenty-eight male sheep were divided randomly and equally into surgical and control groups. Surgical group animals underwent bilateral TMJ osteotomy during which left lateral pterygoid muscle function was blocked. Control animals did not undergo surgery. Body weight, AMMO/PMMO, and TMJ morphological features were evaluated preoperatively and at 12 and 24 weeks post-surgery. In the surgical group, only the right TMJ complexes with maintained lateral pterygoid muscle function developed TMJ bony ankylosis. The AMMO/PMMO and end-feel distance in the surgical group were significantly lower than those in the control group (P 0.001, both) at 12 and 24 weeks post-surgery. Moreover, AMMO (r = -0.940 and -0.952, P 0.001, both) and PMMO (r = -0.944 and -0.953, P 0.001, both) were negatively correlated with the area (mm

This study investigated the efficacy of a sequential combination of arthrocentesis, mandibular manipulation, and anterior repositioning splint (ARS) in the management of acute temporomandibular joint (TMJ) disc displacement without reduction (DDwoR). Twenty-one consecutive patients diagnosed with acute DDwoR by Diagnostic Criteria for Temporomandibular Disorders and magnetic resonance imaging (MRI) were recruited and managed with this method. Clinical and MRI data were obtained before and at 1 week after treatment. The disc-condyle relationship was determined by disc-condyle angle measurement. Condyle/disc positions were described as x-y coordinates with the summit of the articular fossa as the coordinate origin. Statistical analyses including independent/paired samples t-tests were conducted; significance was set at P

Orthognathic surgery involving the mandible can lead to remodelling of the temporomandibular joint (TMJ). Cone beam computed tomography (CBCT) provides an easily accessible three-dimensional (3D) approach to study this entity. A systematic review of the literature was performed with the aim of identifying condylar remodelling analysis protocols using CBCT-derived 3D models. The search yielded 10 eligible studies. The systematic review identified three pillars of a condylar remodelling analysis protocol that were retrievable from each of the included studies: (1) registration, (2) segmentation, and (3) analysis. The studies lacked consensus on how these pillars should be transferred to their respective protocol. Through critical assessment, criteria for a universal condylar remodelling analysis are suggested: (1) performance of a regional voxel-based registration of baseline and postoperative CBCT scans using an anatomical region not prone to postoperative changes, (2) application of a (semi-)automated 3D segmentation algorithm, (3) performance of a combination of both volumetric and surface-based 3D condylar analysis, and (4) extensive validation of each step of the protocol. The homogenization of condylar remodelling analysis protocols and their incorporation into virtual planning software suites raises the potential for the inclusion of larger numbers of patients in future prospective studies in order to gain evidence-based data. ispartof: INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY vol:49 issue:2 pages:207-217 ispartof: location:Denmark status: published

The purpose of this study was to evaluate abnormal magnetic resonance imaging (MRI) findings related to temporomandibular joint (TMJ) pain. This study included 245 joints of 152 patients with temporomandibular disorders with anterior disc displacement; of these, 129 joints had joint pain whereas 116 joints had no joint pain. MRI was used to evaluate the reduction of anterior disc displacement, joint effusion, mandible condylar morphology, bone marrow oedema of the mandibular condyle, and signal intensity of the posterior disc attachment (PDA) on fat-suppressed T2-weighted images. The odds ratio (OR) for each MRI variable for the pain group versus the no pain group was computed using logistic regression analysis. Univariate logistic regression analysis showed significant correlations between TMJ pain and all MRI findings. Multivariate logistic regression analysis showed significant correlations with joint effusion (P=0.03, OR 2.21), bone marrow oedema (P

When using the bilateral sagittal split osteotomy (BSSO) technique, rigid internal fixation (RIF) remains the standard method to accurately fix the distal and proximal osteotomy fragments. A concern with the use of RIF, especially with bicortical screws, is the increased risk of condylar torque and its functional consequences. This technical note introduces a new method for preventing torque of the mandibular condyles after BSSO, using a sagittal split space maintainer.

Unilateral condylar hyperplasia (UCH) of the mandible is a disorder affecting the condyle size, resulting in facial asymmetry. This study was a retrospective review of 27 patients with UCH who underwent condylectomy between 2000 and 2017 at Yonsei University Dental Hospital. Patient demographic characteristics were summarized. UCH was divided into three subtypes: hemimandibular elongation (HE, n=15), hemimandibular hyperplasia (HH, n=4), and osteochondroma (OC, n=8). Of the 27 patients, only one with the HE type and five (18.5%) with the OC type complained of joint pain. Bone scans of all patients showed higher uptake on the UCH side. Lip and maxillary canting was prominent in the HH and HE types. Five patients (18.5%) underwent condylectomy alone, 13 (48.1%) underwent condylectomy with orthodontic treatment, and nine (33.3%) underwent adjunctive jaw surgery with orthodontic treatment. The treatment modalities varied according to the subtype. In all OC type patients, removal of the hyperplastic condyle treated the facial asymmetry. Additional post-surgical orthodontic treatment was necessary in only three cases (37.5%). All HH type patients required mandibuloplasty. All patients showed a stable occlusal outcome without relapse and an improvement in subjective symptoms, despite a decrease in mouth opening of 2.2mm. These findings might be useful in treatment planning for UCH patients.

This study aimed to investigate the effects of bimaxillary advancement orthognathic surgery on the condylar remodeling of the temporomandibular joint (TMJ) using voxel-based regional superimposition of cone-beam computed tomography (CBCT). In this retrospective study, the sample comprised 56 condyles from 28 healthy patients (aged from 16 to 50years) with mandibular retrognathism treated with bimaxillary advancement. CBCT scans were taken preoperatively and at 14.3±4.2months postoperatively. The scans at the two time points were superimposed using regional voxel-based registration to assess condylar changes in the follow-up period. The linear alterations were measured in six different areas of each condyle to determine the pattern of condylar remodeling. Although no significant correlation was observed between changes in condylar surfaces, bone resorption occurred predominantly in the posterior and superior regions, while bone formation was predominantly on the anterior surface. Medial and lateral surfaces presented fewer bone changes. The overall bone changes were smaller than 1mm bilaterally in 21 patients (75%) and, considering each condyle individually, were smaller than 1mm in 48 condyles (85.7%). The results suggested that mild condylar remodeling in healthy patients is a common finding after orthognathic surgery. Future studies may clarify the mechanisms involved in the remodeling and help to understand the reasons for the remodeling pattern.

The aim of this study was to investigate the probability of facial nerve injury (FNI) in the treatment of condylar neck and subcondylar fractures (CN/SCFs) with percutaneous approaches and to identify factors predicting FNI. The data of 80 patients with 87 CN/SCFs were evaluated retrospectively. The primary outcome was FNI occurrence. The predictor variables were age, sex, aetiology, alcohol consumption, fracture site and pattern (dislocation or not), concomitant fractures, time interval to surgery, surgeon experience, plate type, and the dual classification of percutaneous approaches. The approaches were classified based on whether subcutaneous dissection traversed the marginal mandibular branch (MMB) deeply (deep group: submandibular and retroparotid approaches) or superficially (superficial group: transparotid, transmasseteric anteroparotid (TMAP), and high cervical-TMAP approaches). Twenty-two patients (27.5%) suffered FNI, of whom two in the deep group had permanent paralysis of the MMB. In the multivariate logistic regression model, deeply traversing surgery approaches (odds ratio 12.4, P=0.025) and the presence of a dislocated fracture (odds ratio 6.66, P=0.012) were associated with an increased risk of FNI. These results suggest that percutaneous approaches in the superficial group should be recommended for the treatment of CN/SCFs to reduce the risk of FNI.

The purpose of this study was to evaluate volumetric and dentoskeletal changes in 21 patients with active unilateral condylar hyperplasia (AUCH) after proportional condylectomy. A split-mouth design was used: control group healthy joints (HS, healthy side) and test group affected joints (AS, affected side) (21 per group). Cone beam tomography scans were obtained at T0 (preoperative), T1 (10days after the intervention), and T2 (approximately 12 months post-surgery). The condylar unit volume (CUV), articular cavity volume (ACV), and dentoalveolar units (DAUs) were measured. CUV showed a difference of 1.12cm3 between T0 and T1, increasing 0.4cm3 between T1 and T2 on AS. There was no difference between T0 and T2 on HS. ACV increased 0.65cm3 between T0 and T1 on AS, after which it decreased by 0.36cm3 at T2 (0.30cm3 larger than the initial articular cavity at T0). ACV showed no post-surgery differences on HS. Midline DAU showed extrusion of 0.20mm for maxilla and 0.52mm for mandible, while in the lateral area, maxilla was extruded by 0.3mm on HS and was intruded 0.12mm on AS. For the mandible, both sides showed extrusion (0.4-0.6mm). In the distal to canine and molar areas, intrusion of 0.2mm and 0.9mm, respectively, was observed on AS; there was extrusion of 0.6mm distal to the canine on HS. At the mandibular level, AS distal to the canine showed extrusion of 1mm, while intrusion of 0.2mm was observed in the molars. For HS, only extrusion at the molar level (0.2mm) was observed. In conclusion, after proportional condylectomy, a neocondyle forms within 12 months to equal the healthy contralateral side. The articular cavity, which is reduced in the initial stage, increases in size after surgery and the volume gradually approaches that of the healthy side. Dentoalveolar changes occur at the anterior and posterior levels, causing intrusion and extrusion of the interdental crests. An early proportional condylectomy as the sole surgical treatment for patients with AUCH allows normalization of the maxillomandibular relationship.

The aim of this study was to quantify three-dimensional condylar displacements as a result of two-jaw surgery for open bite correction in patients with skeletal class II and class III malocclusion. Pre-surgical (T1) and post-surgical (T2) cone beam computed tomography scans were taken for 16 patients with skeletal class II (mean age 22.3 ± 9.47 years) and 14 patients with skeletal class III (mean age 25.6 ± 6.27 years). T2 scans were registered to T1 scans at the cranial base. Translational and rotational condylar changes were calculated by x,y,z coordinates of corresponding landmarks. The directions and amounts of condylar displacement were assessed by intra- and inter-class Mann–Whitney U-test or t-test. Class II patients presented significantly greater amounts of lateral (P = 0.002) and inferior (P = 0.038) translation than class III patients. The magnitudes of condylar translational displacements were small for both groups. Skeletal class III patients had predominantly medial (P = 0.024) and superior (P = 0.047) condylar translation. Skeletal class II patients presented greater condylar counterclockwise pitch (P = 0.007) than class III patients. Two-jaw surgery for the correction of open bite led to different directions and amounts of condylar rotational displacement in patients with skeletal class II compared to class III malocclusion, with greater rotational than translational displacements.

We aimed to evaluate results of condyle-preserved arthroplasty and costochondral grafting in growing children with temporomandibular joint ankylosis through medium-term follow-up and three-dimensional metric analysis. We assessed 11 patients (14 sides) with type II ankylosis (group A) and 11 patients (13 sides) with type III/IV (group B) from January 2012 to December 2015. Group A patients received condyle-preserved arthroplasty and group B patients received costochondral grafting. Postoperative computed tomography was used to measure condylar height, condylar width, mandibular ramus height and mandibular body length. Changes in maximum mouth opening were evaluated >1year postoperatively. Postoperative follow-up showed similar average maximum mouth opening and one case of recurrence in each group. Computed tomography measurements showed that condylar width and mandibular ramus height increased in both groups A and B (P

According to recognized guidelines, a total alloplastic replacement may be indicated to resolve temporomandibular pain and functional limitations in cases where conservative and less aggressive surgical management strategies have failed. It is broadly believed that, as a result of the surgical procedure, the function of the lateral pterygoid muscle is lost and so are the laterotrusive and protrusive jaw movements. Furthermore, the joint prosthesis design may not be conducive to lateral and protrusive movements. Using a dynamic stereometry technique, it was possible to perform a quantitative analysis of kinematics in TJR patients. The cases of four patients who showed preserved lateral and/or protrusive motion are presented here. During mouth opening, prosthetic condyle translation ranged from 3.18mm to 10.09mm and it was also possible to observe this clinically. It has been suggested that changes in prosthesis design may have improved postoperative jaw kinematics. Considering the large diversity in treatment outcomes, it is recommended that the individual prognosis should always be discussed with the patient prior to surgery.

The aim of this study was to assess the temporomandibular joint (TMJ) disc–condyle relationship in asymptomatic young adults. Ninety-three volunteers aged 19–23 years without temporomandibular disorder (TMD) symptoms underwent TMJ magnetic resonance imaging (MRI). The condylar centre and apex methods were used to measure and analyse the position of the disc in the oblique sagittal plane, and the reliability of the two methods was compared by calculating the intra-class correlation coefficient (ICC). Furthermore, 18 of the volunteers were randomly selected for three-dimensional (3D) reconstruction of the TMJ structure and the disc–condyle relationship. The 3D TMJ structure was established by semi-automatic segmentation of the condyle and articular disc in ITK-SNAP software; the condylar apex method was then performed. It was found that only 33.3% of the posterior edge of the articular discs were located in the normal 12 o’clock position with respect to the condyle. Moreover, this study suggests that the condylar centre method lacks accuracy when compared to the condylar apex method in regard to the measurement of the TMJ disc–condyle relationship (0

This article outlines a conceptual approach to the reconstruction of jaw deformities associated with abnormalities in the mandibular condyle. The authors describe a hierarchy of reconstruction, emphasizing use of the least invasive and progressing to the most complex and invasive techniques, depending on the nature and severity of the underlying deformity, prior operations, patient age, and stage of growth. Consider joint preservation orthognathic surgical correction, followed by biological techniques for replacement of the condyle, and avoid replacing a functional temporomandibular joint based only on radiographic remodeling and concerns about potential future flare-ups of disease based on anecdotal data.

Spatial deviations of the temporomandibular joint (TMJ) after oncological mandibular reconstruction are important to the aesthetic and functional rehabilitation. The aim of this study was to clarify whether and how three dimensionally (3D) printed patient-specific surgical plates, and the preservation of the condyle or ramus, affect spatial deviations of the TMJ. A total of 33 patients who underwent mandibular reconstruction via computer-assisted surgery were included. Regarding absolute deviations, patients in the 3D-printed plate group showed smaller TMJ deviations compared to those in the conventional plate group. There was no difference in absolute deviations of the TMJ regardless of whether the condyle or ramus was preserved. Regarding physiological deviations, the impact on the contralateral TMJ was smaller in the 3D-printed plate group. Patients with both the condyle and ramus removed had significantly higher deviations of the condyle and joint space. In summary, 3D-printed patient-specific surgical plates improved the spatial accuracy of the TMJ. Under physiological conditions, TMJ deviations on the operated side were mainly affected by the preservation of the condyle. Removal of both the condyle and ramus caused more severe spatial interference to the TMJ; this should be further confirmed.

There is no accepted method of reporting mandibular fracture that reflects incidence, treatment and outcome for individual cases. As most series include anatomical site only for all fractures, the aim was to establish a new method to report fractures based on a systematic review of the literature and an internal audit. The classification proposed is: Class I; condyle, II; angle, IIc; II+condyle, III; body/symphysis, IIIc; III+condyle, IV; multiple fractures not including condyle, IVc; IV+condyle, V; bilateral condyle±other fracture(s). A total of 10,971 adult and 914 paediatric cases were analyzed through systematic review, and 833 from the regional audit. Only 32% (14/44) of reported series could be reclassified which, when added to the audit data, showed Class IV was most common (29%), with similar proportions of Class III, Class IIIc and Class II (18-23%). External validation (literature review) in terms of treatment and outcome was non-informative, but the internal validation (audit) demonstrated an increasing requirement for adding maxillomandibular fixation (MMF) to open reduction and internal fixation (ORIF) as class increased. The heterogeneity of data reporting found in the systematic review confirms the need for a classification such as this, likely to enhance comparison of varying management protocols.

Reconstruction for large-scale temporomandibular joint (TMJ) defects can be challenging. We have used the medial femoral condyle (MFC) osseocartilaginous flap for repair of TMJ defects. The aim of this paper was to describe our technique and to present the preliminary results. The MFC osseocartilaginous flap was used as a free vascularized graft for TMJ defect in four patients who had undergone resection for benign tumor of the TMJ region (n = 2) or TMJ ankylosis (n=2). A computer-assisted technique was used in all cases. Symmetry of the mandible was objectively evaluated by postoperative computed tomography. Complications were recorded during follow-up visits. Lower extremity functional status was assessed by the Lower Extremity Functional Scale (LEFC) questionnaire. The MFC osseocartilaginous flap success rate was 100%; bony union was obtained in all four patients, and normal occlusion was achieved within 6-11 months after surgery. No flap-related complications occurred. All patients were satisfied with their postoperative facial symmetry and oral function. The LEFC score ranged from 72 to 80, indicating normal lower extremity function. Vascularized MFC osseocartilaginous flap appears to be a reliable option for reconstruction of large-scale TMJ defects.

Bone scintigraphy is an extremely valuable technique in diagnosis and treatment planning for patients with condylar hyperplasia (CH). The main objective of this study was to develop an approach to determine normal activity values in the mandibular condyles, adjusted to age and sex, through quantitative analysis of bone single-photon emission computed tomography (SPECT) on a condyle-by-condyle basis and to compare these values with those of a control group comprising patients with confirmed CH. Technetium 99 m-methylene diphosphonate (99mTc-MDP) SPECT studies of the mandibular condyles were performed in patients with no mandibular pathology for quantitative analysis. Regions of interest were drawn on slices representing the upper, middle, and inferior thirds of each condyle and on the summation of transaxial slices representing the whole condyle (three-dimensional approach). The clivus was used for internal validation and the condyle to clivus ratios were calculated. These ratios were compared between ‘normal’ and ‘diseased’ condyles. A total 144 condyles in normal patients and 25 in confirmed CH patients were analysed. Differences between the ratios were evaluated through the coefficient of variation. In normal patients, the ratios to the clivus on the summed condyle image showed the lowest variability: range 0.3–1.28 (median 0.74). The quantile regression model showed significant differences with respect to sex, but not to age. The Mann–Whitney test showed significant differences in the ratios to clivus between normal and diseased condyles (P

The aim of this study was to investigate the contributing factor of impaired skeletal quality in the pathogenesis of idiopathic condylar resorption (ICR). One hundred and twenty-six patients with MRI-confirmed ICR and 596 patients with disc displacement (DD) without a diminished condyle, of both sexes, were included. Dental examinations and retrospective surveys regarding temporomandibular joint symptoms and progression of maxillofacial deformities were conducted. Skeletal bone mineral density (BMD) was measured by dual energy X-ray absorptiometry (DXA) and converted to T-scores and Z-scores. Results showed that ICR patients had a smaller overbite (1.56±3.3 vs 3.05±2.0mm), larger overjet (4.9±2.4 vs 3.5±1.9mm), larger range of mouth opening (36.5±6.7 vs 33.6±7.1mm), and higher rates of anterior open bite and mandibular retrusion compared to DD patients (all P

Condylar hyperplasia is known to result in facial asymmetries and constitutes a well-recognized group of unilateral mandibular enlargements. Condylar hyperplasia has been sub-classified into hemimandibular hyperplasia and hemimandibular elongation. A much rarer disorder, hemifacial hyperplasia (or hemifacial hypertrophy) is a congenital malformation characterized by prominent unilateral overdevelopment of the hard and soft tissues of the face. The affected side grows at a faster rate than the non-affected side, creating a marked asymmetry that potentially involves the skeleton and teeth, as well as all components of the associated soft tissues. Hemifacial hyperplasia is usually identified at birth and progresses towards puberty, but is not thought to alter throughout the lifetime of affected individuals. A case series of five patients clinically diagnosed with hemifacial hyperplasia is presented, with the aim of reviewing the clinical features, discussing their individual surgical management, and summarizing the more recent identification of possible genetic mutations that may be responsible for hemifacial hyperplasia and related overgrowth disorders. It is speculated that depending on the genetic factors, the disorder may be progressive in specific cases.

The comparison of serial radiographs and clinical photographs is considered the current accepted standard for the diagnosis of active condylar hyperplasia in patients with facial asymmetry. Single photon emission computed tomography (SPECT) has recently been proposed as an alternative method. SPECT can be interpreted using three reported methods absolute difference in uptake, uptake ratio, and relative uptake. SPECT findings were compared to those from serial comparisons of radiographs and clinical photographs taken at the time of SPECT and a year later; the sensitivities and specificities were determined. Two hundred patient scans were evaluated. Thirty-four patients showed active growth on serial growth assessment. On comparison with serial growth assessment, the sensitivity and specificity of the three methods ranged between 32.4% and 67.6%, and 36.1% and 78.3%, respectively. Analysis using receiver operating characteristic (ROC) curves revealed area under the curve (AUC) values of

The aim of this study was to evaluate the changes in condylar volume and joint spaces occurring in patients undergoing bimaxillary orthognathic surgery for the treatment of class II deformities, by means of cone beam computed tomography (CBCT). Initial and follow-up (at least 6 months) CBCT examinations of 114 condyles (57 patients) were studied retrospectively. Linear measurements of the joint space and volumetric analysis of changes in condylar volume were performed using Dolphin 3D Imaging in association with ITK-SNAP 3.0.0 segmentation software. The paired t-test and Pearson correlation coefficient were applied, and a descriptive analysis was performed. Mean condyle volumes were significantly smaller at follow-up (P=0.0125). There were significant reductions in superior and medial joint spaces in the follow-up examinations (both P

Made available in DSpace on 2018-12-11T17:13:24Z (GMT). No. of bitstreams: 0 Previous issue date: 2017-12-01 This study investigated predictive risk factors of condylar remodeling changes after counterclockwise maxillomandibular advancement (CCW-MMA) and disc repositioning surgery. Forty-one female patients (75 condyles) treated with CCW-MMA and disc repositioning had cone beam computed tomography (CBCT) scans taken pre-surgery, immediately after surgery, and at an average 16 months post-surgery. Pre- and post-surgical three-dimensional models were superimposed using automated voxel-based registration on the cranial base to evaluate condylar displacements after surgery. Regional registration was performed to assess condylar remodeling in the follow-up period. Three-dimensional cephalometrics, shape correspondence (SPHARM-PDM), and volume measurements were applied to quantify changes. Pearson product–moment correlations and multiple regression analysis were performed. Highly statistically significant correlation showed that older patients were more susceptible to overall condylar volume reduction following CCW-MMA and disc repositioning (P ≤ 0.001). Weak but statistically significant correlations were observed between condylar remodeling changes in the follow-up period and pre-surgical facial characteristics, magnitude of the surgical procedure, and condylar displacement changes. After CCW-MMA and disc repositioning, the condyles moved mostly downwards and medially, and were rotated medially and counterclockwise; displacements in the opposite direction were correlated with a greater risk of condylar resorption. Moreover, positional changes with surgery were only weakly associated with remodeling in the follow-up period, suggesting that other risk factors may play a role in condylar resorption. Department of Orthodontics and Pediatric Dentistry Araraquara School of Dentistry Sao Paulo State University (UNESP) Department of Orthodontics and Pediatric Dentistry School of Dentistry University of Michigan Private practice Department of Orthodontics School of Dentistry Federal University of Rio de Janeiro San Antonio School of Dentistry University of Texas Health Science Center Department of Psychiatry School of Medicine University of North Carolina Departments of Oral and Maxillofacial Surgery and Orthodontics Texas A&M University Health Science Center Baylor College of Dentistry Baylor University Medical Center Department of Orthodontics and Pediatric Dentistry Araraquara School of Dentistry Sao Paulo State University (UNESP)

Dislocation of the temporomandibular joint, which represents 3% of all dislocated joints reported in the body, occurs when the mandibular condyle is displaced anteriorly beyond the articular eminence. Although anterior dislocation of the mandibular condyle is well documented in the literature, superior, lateral, and posterior dislocation of the condyle is rare. Only a few reports documenting superolateral dislocation with anterior mandible fractures have been published in the past. However such dislocations without any associated fractures are even rarer. This report documents a case of superolateral dislocation of an intact mandible in a 48-year-old woman following a traumatic incident. This paper also reviews previously documented case reports and focuses on the causative mechanism, dynamics, and management of such dislocations.

Since the introduction of rigid internal fixation devices, more and more surgeons favour an open approach to treating condylar fractures of the mandible in adult patients. Different indications for open treatment have been published. Open treatment is associated with surgical complications because of the technique employed. The aim of this systematic review was to provide an overview of the studies published exclusively on open treatment, and to summarize the existing open treatment modalities and their clinical outcomes. A total of seventy studies were selected for detailed analysis. Most studies reported good results with regard to the outcome measures of open treatment. Surgical complications including hematoma, wound infection, weakness of the facial nerve, sialocele, salivary fistula, sensory disturbance of the great auricular nerve, unsatisfactory scarring, and fixation failure were reported in the studies. This review suggests that because of the high level of methodological variance in the relevant studies published to date, among other factors, there are currently no evidence-based conclusions or guidelines that can be formulated with regard to the most appropriate open treatment. Establishment of such standards could potentially improve treatment outcomes.

Since the introduction of rigid internal fixation devices, more and more surgeons favour an open approach to treating condylar fractures of the mandible in adult patients. Different indications for open treatment have been published. Open treatment is associated with surgical complications because of the technique employed. The aim of this systematic review was to provide an overview of the studies published exclusively on open treatment, and to summarize the existing open treatment modalities and their clinical outcomes. A total of seventy studies were selected for detailed analysis. Most studies reported good results with regard to the outcome measures of open treatment. Surgical complications including hematoma, wound infection, weakness of the facial nerve, sialocele, salivary fistula, sensory disturbance of the great auricular nerve, unsatisfactory scarring, and fixation failure were reported in the studies. This review suggests that because of the high level of methodological variance in the relevant studies published to date, among other factors, there are currently no evidence-based conclusions or guidelines that can be formulated with regard to the most appropriate open treatment. Establishment of such standards could potentially improve treatment outcomes.

The aim of this study was to assess the management of the condyle during the restoration of mandibular defects following tumour resection. A total of 41 patients who underwent simultaneous tumour resection and reconstruction with vascularized iliac myocutaneous flaps for mandibular defects, from September 2010 to October 2014, were included. These patients were divided into three groups: group 1, condyle preserved; group 2, condyle sacrificed; group 3, condyle frozen. Patients were followed up at 1, 3, 6, and 12 months for the evaluation of appearance, occlusion, and speech. The TMJ disability index (DI) and craniomandibular index (CMI) differed significantly according to the method of management, as well as the position and morphology of the reconstructed condyle (P