Search

Abstract: The primary objective of this paper is to quantify the impact of the internal magnetic field and reversibility of the magnetocaloric effect on the numerical evaluation of the thermal performance of a parallel-plate active magnetic regenerator. To this end, direct measurements of the adiabatic temperature change of commercial-grade gadolinium samples were carried out for an applied field change of 1.65 ± 0.03 T (for both magnetization and demagnetization) and temperatures between 283 and 303 K. The tests were carried out in a specially constructed apparatus and the results were in good agreement with the literature. The data were incorporated into a mathematical model for solving the fluid flow and conjugated heat transfer in the parallel-plate regenerator. It was found that if demagnetization phenomena (i.e., the demagnetization factor and the reversibility of the magnetocaloric effect) are not take properly into account, the thermal performance of the regenerator can be severely over-predicted. [Copyright &y& Elsevier]

Abstract: A new, fast and flexible, time-dependent, one-dimensional numerical model was developed in order to study in detail the operation of an active magnetic regenerator (AMR). The model is based on a coupled system of equations (for the magnetocaloric material and the heat-transfer fluid) that have been solved simultaneously with the software package MATLAB. The model can be employed to analyze a wide range of different operating conditions (mass-flow rate, operating frequency, magnetic field change), different AMR geometries, different magnetocaloric materials and heat-transfer fluids, layered and single-bed AMRs, etc. This paper also presents an optimization of the AMR’s geometry, where the AMR consists of a packed-bed of grains (spheres) of gadolinium (Gd). The optimization of the mass-flow rate and the operating frequency of the AMR were performed by studying five different diameters of Gd spheres. [Copyright &y& Elsevier]

Abstract: In order to obtain a better reliability, consistency and accuracy of results obtained with a numerical simulation of an AMRR (active magnetic regenerator refrigerator), a dimensionless numerical model was developed, which can equally be used for determination of regenerator’s heat transfer coefficient and simulation of passive heat regenerators or AMRR operation. Regenerator’s heat transfer coefficient α f, is a crucial input parameter in the simulation of AMRR operation and has a primal effect on the outcome of a solution. This paper deals with a derived dimensionless model and discusses errors involved when using different models for heat transfer coefficient and AMRR operation simulation. [Copyright &y& Elsevier]