Search

Abstract: This paper aims at developing an analytical model for the coupled heat and mass transfer processes in a counterflow Reversibly Used Cooling Tower (RUCT) based on operating conditions, which is more realistic than most conventionally adopted Merkel approximations. Temperature and moisture content differences are chosen as the driving forces of heat and mass transfer correspondingly and a system of specific difference equations is developed to solve the model more efficiently. The model is investigated by using an iterative algorithm, which is validated with the experimental data reported. The analytical model also accommodates the direct and quick calculation of air and water temperature profiles, moisture content of air and the water mass flow rate change along the vertical length of the RUCT. With the aid of the developed model, the thermal behavior of the counterflow RUCT under various operating and environmental conditions is also studied in this paper. The results reveal that the proposed model can provide a theoretical foundation for practical design and performance evaluation of counterflow RUCT. [Copyright &y& Elsevier]

Abstract: The primary objective of this paper is to quantify the impact of the internal magnetic field and reversibility of the magnetocaloric effect on the numerical evaluation of the thermal performance of a parallel-plate active magnetic regenerator. To this end, direct measurements of the adiabatic temperature change of commercial-grade gadolinium samples were carried out for an applied field change of 1.65 ± 0.03 T (for both magnetization and demagnetization) and temperatures between 283 and 303 K. The tests were carried out in a specially constructed apparatus and the results were in good agreement with the literature. The data were incorporated into a mathematical model for solving the fluid flow and conjugated heat transfer in the parallel-plate regenerator. It was found that if demagnetization phenomena (i.e., the demagnetization factor and the reversibility of the magnetocaloric effect) are not take properly into account, the thermal performance of the regenerator can be severely over-predicted. [Copyright &y& Elsevier]

Abstract: With the aim to develop a generalized model for predicting the frost growth on cold flat plate, experiments were conducted in a suction-type open-loop wind tunnel under variant frosting conditions. Based on the Hayashi correlation, a modified correlation of initial frost density was developed by the experimental results. After validating this proposed correlation, dynamic frosting characteristics, such as the frost thickness, density, frost surface temperature and heat flux were predicted under a wide range of frosting conditions. Compared with 25 groups of experimental results taken from this paper or previous open literatures, the average simulating errors were found to be limited within ±10%. The validation results indicate the proposed model is suitable to predict the dynamic heat and mass transfer process of the frost growth under a wide range of frosting conditions. [Copyright &y& Elsevier]