Search

Leaf area index (LAI), officially listed as one of essential climate variables, quantifies the structure and amount of vegetation and characterizes the interaction between vegetation and climate. The advanced MEdium Resolution Spectral Imager (MERSI-II) onboard FengYun-3D (FY-3D) can provide twice-daily global observations of earth at a spatial resolution of 250 m. Therefore, it has great potential for promoting the improvement of global LAI products and boosting the development of earth system modelling. However, the existing methods are mostly sensor-specific, they can not be directly applied to MERSI-II data for LAI generation. In this paper, we proposed a sensor-adaptive approach for LAI estimation based on MERSI-II observations. This method is composed of an LAI retrieval look-up table based on radiative transfer theory, which was calibrated by a global optimizing algorithm to adapt MERSI-II characteristics, and a backup algorithm training neural networks with MERSI-II Normalized Difference Vegetation Index (NDVI) and Moderate Resolution Imaging Spectroradiometer (MODIS) LAI. We evaluated the MERSI-II LAI retrievals by intercomparison to MODIS products over mainland China and direct validation using ground-based upscaled LAI reference maps. The assessments demonstrate that (1) the derived MERSI-II LAI products agree well with the MODIS benchmarks in both spatial and temporal respects; (2) compared to the MODIS LAI, the MERSI-II LAI retrievals with less gaps show great potential in improving spatiotemporal continuity; (3) validation versus in-situ measurements reveals acceptable accuracy of the MERSI-II LAI products with a R2 of 0.85 and RMSE of 0.82; (4) the proposed parametric optimization strategy could successfully transplant MODIS LAI algorithm to MERSI-II data. [ABSTRACT FROM AUTHOR]

The surface displacement by seasonally freezing bulge and thawing subsidence are the main hazards for engineering construction in permafrost regions, especially for the Qinghai-Tibet railway. One of the main problems is how to monitor the frozen ground's displacement in the process of construction and protection of the Qinghai-Tibetan railway. The technology of Permanent Scatterers (PS) has been successfully used to detect the long-term subsidence at urban areas. For detecting the subsidence of the frozen earth on Qinghai-Tibet Plateau, this paper extended the capability of the technology of PS to investigate deformation phenomena in vegetated area. The paper analyses an interferometric phase model, and presents improved PS algorithms for separating different components in interferometric phase. The proposed technique is implemented using ENVISAT ASAR images to detect the deformation over permafrost region of Qinghai-Tibet Plateau. The results are in concordance with results provided by a traditional ground levelling, which encourages future development using the Permanent Scatterers method to analyse deformation of the frozen earth on Qinghai-Tibet Plateau. [ABSTRACT FROM AUTHOR]

In order to extract quantitative water-leaving information from the Thematic Mapper (TM) image accurately in inland waters, atmospheric correction is a necessary step. Based on former researchers' results, the paper presents two atmospheric correction algorithms based on meteorological data (MD) and on Moderate Resolution Imaging Spectroradiometer (MODIS) Vicarious Calibration (MVC) for TM image in inland waters according to the theory of radiative transfer. Studying Taihu lake, China, in this paper we derived water remote sensing reflectance from a TM image of 26 July 2004 by these two atmospheric correction algorithms and we compare the results with that of dark object subtraction (DOS) and 6S code. The results show that the effect of atmospheric correction based on meteorological data and MODIS Vicarious Calibration is much better than that of DOS and 6S code. Although the MD is more accurate, MVC may be an ideal choice for TM images in inland water because TERRA MODIS images can be acquired easily than collecting meteorological data at the time of satellites passing over. [ABSTRACT FROM AUTHOR]

In this paper we present an improved watershed segmentation algorithm for settlement mapping from medium resolution satellite data over plain areas in China. The algorithm can increase the computational efficiency of the fastest reported watershed segmentation algorithm by 30-40%. We apply this method to a selected study area in southern Hebei Province, China. We acquired a Landsat Enhanced Thematic Mapper Plus (ETM + ) image over this area in May 2000, two Landsat Thematic Mapper (TM) images in August 2004 and April 2005, and two Beijing-1 satellite images in May 2006 and May 2007. The three types of images have three similar spectral bands (green, red and near-infrared) with similar spatial resolution (30-32 m). Only the red and near-infrared bands were used in image segmentation for settlement area extraction. The extracted settlement results are compared with manual interpretation results by two people. We assumed the human interpretation results are of higher accuracy than the segmentation results. Our results indicated that our settlement area extraction method is effective. With high quality images, the overall accuracies are nearly 94%, the kappa coefficient can be greater than 0.85. [ABSTRACT FROM AUTHOR]

A remote sensing approach is proposed in this paper for monitoring instantaneous underwater light climate in Dahuchi Lake, China. Water constituents that are optically significant to the lake water can be retrieved through this method based on an artificial neural network (ANN) algorithm with a satisfactory accuracy. In this study, the ANN was trained by spectral simulations which were generated by a water colour simulation model (WASI). An underwater light attenuation model has been built by fitting the field measurements and applied to calculate photosynthetically available radiation (PAR) at the bottom of the lake from the inputs of hyperspectral reflectance above the water surface and the water depth. Results show that this method can predict the concentration of suspended particle matter (SPM) with a high accuracy and explain more than half of the underwater PAR variation with a standard deviation of 94.8 μmol s-1 m-2. In order to test the portability of the algorithm, it has also been extended to three bands of Landsat TM image. Compared with hyperspectral inputs, ANN with broadband inputs has lower but still acceptable accuracy on SPM retrieval. The advantage of this method lies in its time-efficient and cost-efficient monitoring of underwater light climate, i.e. the simulations generated by a semi-physical model can be used for ANN training, instead of using a large number of field measurements. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive knowledge-based similarity classifier that uses remote sensing images and other auxiliary data to map spatial heterogeneity, for stratifying sample units distributed at the geographical landscape in order to improve the precision of the estimate of interest. Our method emphasises the decrease of bias so as to produce the high-quality stratifying frame. For this purpose, the method takes some necessary measures such as use of auxiliary variables including spectral bands, physical and socioeconomic data to help cluster analysis, correlation analysis between auxiliary variables and the goal variable to remove irrelevant data and consideration of spatial correlation in cluster analysis through the density-based unsupervised learning etc. Furthermore, considering the time-consuming characteristic of clustering huge spatiotemporal datasets, the method uses non-parametric supervised learning to induce rules for clustered classes. The rules could be efficiently used to group pixels into different classes of similarity. Then in the method, the pixel-level similarity image was vectorised into polygons with different group labels, thus producing the vector map of geospatial heterogeneity as an easy-to-use stratification frame. Last, to have an accurate estimation of the goal variable, our method re-divided sample units while the units covered by different strata and considered the effect of the sample size in the estimation algorithm. In the survey case of the cultivated land area, the proposed method achieves higher accuracy and a better coefficient of relative efficiency (RE) of stratification with its estimate closer to the observed value in comparison with other stratification strategies, e.g., k-means, SOM and those similar to eco-regions. Our method has potential practical merits as a good stratification strategy can increase the precision and considerably save the cost of sampling for many large regions, such as those in China, to be surveyed. [ABSTRACT FROM AUTHOR]

The DInSAR technique with a multibaseline is becoming popular nowadays to investigate slow urban deformation. In this paper, we focus on deformation retrieval in large areas, including urban and suburban areas. Based on the multibaseline DInSAR algorithm proposed by Mora, three extensions are derived. First, least-squares adjustment and error-controlling methods are used to obtain stable deformation velocity and height error estimations. The least-squares QR factorizaiton algorithm is emphasized to solve large, linear, and sparse functions. Second, a new complex network is presented to limit noise effects on the Delaunay triangular network. Third, by combining complex and Delaunay networks, large-area deformation is investigated, from centre urban areas to suburban areas. The enhanced algorithm is performed to investigate the subsidence of Cangzhou, Hebei province (northern China) during 1993-1997 by using 9 ERS SLC data. The experimental results show serious subsidence in the region and are validated by levelling data and groundwater wells data. Compared with levelling data, the estimation errors of linear deformation velocity in urban areas are in the range of (-2, 2) mm year-1, and in suburban areas, the errors are in the range of (-26, 15) mm year-1, which is sufficiently feasible to determine the status of subsidence relative to the maximum deformation velocity of about -100 mm year-1. The subsidence centres in urban areas are consistent with the spatial distribution of groundwater wells, which provides evidence that groundwater overexploitation is the main cause of subsidence in Cangzhou. The closure of wells will be a good way to control subsidence in the future. [ABSTRACT FROM AUTHOR]

Low consumer-grade cameras attached to small unmanned aerial vehicles (UAV) can easily acquire high spatial resolution images, leading to convenient forest monitoring at small-scales for forest managers. However, most studies were carried out in the low canopy density and flat ground plantations to detect individual trees. We selected overlapping canopy plantation in mountainous area in the eastern of China and acquired high spatial resolution UAV RGB images to detect individual trees. A total of 402 reference trees were located in three rectangle plots (900 m2). To enhance the confidence of the tested individual tree detection method, clear-cutting and Real-Time Kinematic (RTK) were used to obtain the truth values in the plots. A novel method for semi-automatic individual tree detection was proposed based on a local-maximum algorithm and UAV-derived DSM data (LAD) in this study. The detection accuracy of LAD was compared with commonly used methods based on UAV-derived orthophoto images, local-maximum algorithm (LAO), object-oriented feature segmentation (OFS), multiscale segmentation technique (MST) and manual visual interpretation (MVI). The overall accuracy (OA (%) decreased in the order of LAD (84.5%) > MST (69.1%) > OFS (65.1%) > MVI (64.1%) > LAO (59.1%). LAD had only 15.5%s omission errors (OM (%), which was less than half of the other four methods in comparison. It was noteworthy that MVI had 35.9% OM %, which revealed that MVI should be used carefully as the truth value. LAD showed similar repeated detection error (RP (%) and completely wrong detection (CW (%), while the other four methods had obviously higher CW % than the RP %. From our results, it can be concluded that the proposed LAD method may help improving the accuracy of individual tree detection to an acceptable accuracy (>80%) in dense mountain forests, and has practical advantages in future research direction to assess tree attributes from UAV RGB image. [ABSTRACT FROM AUTHOR]

The Bayesian Maximum Entropy (BME) algorithm that can model larger-scale spatial heterogeneity and integrate multiple types of data is a better spatial estimation algorithm in avoiding the circular problem and improving the estimation accuracy of parameters than original empirical geostatistic and spatial statistic methods. To obtain higher-resolution and higher-accuracy soil moisture (SM) data, this study used the BME algorithm to integrate the multiple environmental factor variables related to SM as auxiliary data (11 data sets in total) such as the Normalized Difference Vegetation Index (NDVI), Land Surface Temperature (LST), and Albedo products with 1 kilometre (km) grid resolution from the Moderate-resolution Imaging Spectroradiometer (MODIS), the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM) satellite data, and the Slope, Aspect, Plan curvature, Profile curvature, Surface roughness, Wetness index, Relief amplitude products generated from ASTER GDEM data. First, the FengYun 3-B satellite (FY3-B) SM product with 25 km grid resolution was downscaled to 1 km grid resolution using the visible, infrared (IR), and microwave fusion method. The downscaled FY3-B SM data and auxiliary data were used to generate the weighted probability soft data (SD) under four cases, case 1: 500 sample points of SD, case 2: 450 sample points of SD, case 3: 400 sample points of SD, and case 4: 350 sample points of SD. Particularly, we used two methods, the multivariable correlation analysis method and principal component analysis (PCA) method to get the weight values of environmental factor variables, i.e. NDVI, LST, Albedo, the Digital Elevation Model (DEM), Slope, Aspect, Plan curvature, Profile curvature, Surface roughness, Wetness index, and Relief amplitude with SM. Then, the in-situ SM measurements as hard data (HD) were used to calibrate the weighted probability SD in the procedure of BME SM estimation. The SM under four cases were estimated from the weighted probability SD and HD using BME algorithm. Finally, comparisons of the estimated SM using BME algorithm with in-situ SM measurements at maize study area were carried out in this study. Our results indicated that the accuracy of the estimated SM using BME algorithm, the root-mean-square error (RMSE) = 0.049 cm3 cm−3, the correlation coefficient (r) = 0.639, the unbiased RMSE (RMSEu) = 0.047 cm3 cm−3, and Bias = 0.002 cm3 cm−3, under case 1 based on PCA method was obviously better than the downscaled FY3-B SM (RMSE = 0.079 cm3 cm−3, r = 0.096, RMSEu = 0.069 cm3 cm−3, and Bias = 0.039 cm3 cm−3) that was generated by the visible, IR, and microwave fusion method. We concluded that integrating auxiliary data into SM estimation using BME algorithm could further improve the downscaled FY3-B SM that was generated by visible, IR, and microwave fusion method. [ABSTRACT FROM AUTHOR]

Net surface shortwave radiation (NSSR) is a key quantity for the estimation of surface energy budget and is used in various land-surface models. In this article, two different methodologies, including three empirical algorithms and one advanced simplified theoretical algorithm for estimating instantaneous NSSR from Moderate Resolution Imaging Spectroradiometer (MODIS) data are explored and summarized. An advanced simplified theoretical algorithm is developed by combining two simplified radiative-transfer models with various MODIS atmosphere and land products. To comprehensively evaluate these algorithms, ground measurements from seven stations widely distributed in different climatic regions of China are used. The results indicate that under clear-sky conditions, the three empirical algorithms present appreciable difference in accuracy, while under cloudy skies, they produce similar, but not very good, predictions. Compared with these empirical methods, the simplified theoretical algorithm we adopt can significantly improve accuracy. The root mean square difference (RMSD) yielded by this algorithm is approximately 54 W m−2 under clear skies and 83 W m−2 under cloudy skies, respectively. Since the utility of instantaneous NSSR estimates is limited compared to that of the daily average value, a simple scheme to acquire the daily average NSSR is established, which is based on instantaneous estimations from two satellite MODIS sensors (Terra: AM and Aqua: PM), and the daily average NSSR over the Beijing area is also mapped. [ABSTRACT FROM PUBLISHER]

It is acknowledged that fluorescence line height (FLH) algorithms are still hampered by the uncertainty of fluorescence peak position. The fluorescence peak moves to longer wavelengths with the increase of chlorophyll a concentration. In this article, the fluorescence enveloped area (FEA), which integrates the fluorescence height and the fluorescence peak position, was used to estimate the chlorophyll a concentration in the coastal waters of the Pearl River Estuary. The FEA algorithm was developed from in situ data of chlorophyll a concentration, total suspended matter (TSM) concentration and above-water remote sensing reflectance, which were collected at 37 sampling stations in the Pearl River Estuary during two cruises. The results showed that the FEA algorithm made a better estimation of chlorophyll a concentration compared with the widely used FLH algorithm and moving fluorescence line height (MFLH) algorithm. These three algorithms were applied to the Pearl River Estuary for retrieval of chlorophyll a concentration from Hyperion data acquired on 21 December 2006. Compared with the FLH and the MFLH, the FEA algorithm showed a rational distribution of the chlorophyll a concentration in the Pearl River Estuary. [ABSTRACT FROM AUTHOR]

Atmospheric correction is of great importance in quantitative remote sensing studies. However, many of the atmospheric correction algorithms proposed in the literature are not easily applicable in real cases. In order to develop a practical atmospheric correction algorithm, Moderate Resolution Imaging Spectroradiometer (MODIS) imagery is employed to obtain aerosol optical depth and the total atmospheric water vapour content, which are used to compute the transmittances in a dark object subtraction (DOS) model. An improved DOS atmospheric correction method combining MODIS imagery with the conventional DOS technique is proposed. A Landsat 7 Enhanced Thematic Mapper Plus (ETM+) image acquired on 21 October 2001 in Wuyi mountain, south-eastern China, and a CBERS 02 CCD image acquired on 24 August 2005 in Dunhuang, north-western China, were atmospherically corrected with this new approach. Various tests are performed, from spectral signature analysis, to vegetation index spatial profile and image information content comparisons, and by direct comparison with ground-measured reflectances, to evaluate the performance of the improved DOS model. The evaluation shows it can generally achieve a good atmospheric correction result. [ABSTRACT FROM AUTHOR]

The newest daily and monthly Moderate Resolution Imaging Spectroradiometer (MODIS) aerosol optical depths (AOD or τ) dataset over land, C005, retrieved using the second-generation operational algorithm, were evaluated using a ground-based Aerosol Robotic Network (AERONET) dataset from 13 sites over China. The dataset covers the period 2003-2006. Daily MODIS C005 AODs over China were found to have a positive bias with a relationship of τMODIS = 0.135 + 1.022τAERONET, for which the offset is larger than reported global validation results. However, the relationship τMODIS = 0.021 + 0.929τAERONET showed that monthly MODIS C005 AODs were an overestimation for small AOD and underestimation for high AOD. Both daily and monthly MODIS AOD retrievals showed poor performance in extreme aerosol conditions, e.g. under dust events or heavy urban/industrial haze. Nevertheless, both daily and monthly MODIS C005 AOD datasets can be used for investigation of aerosol spatial distribution and temporal variation over China. [ABSTRACT FROM AUTHOR]

A simple topographic correction approach, the Variable Empirical Coefficient Algorithm (VECA), was developed using theoretical and statistic analyses of the radiance values of remotely sensed data acquired for rugged terrain and the cosine of the solar illumination angle (cos i). Visual comparison and statistical analysis were used for evaluation of the proposed algorithm and the performance of the VECA approach was compared with 10 commonly used methods. The test site selected for this study is located on the south hill of the Qinling Mountain in Shanxi province, China, and the remotely sensed data used were from Landsat-7 Enhanced Thematic Mapper Plus (ETM+) images. The results indicate that the Cosine-T, Cosine-C, sun-canopy-senor (SCS) and Cosine-b correction have the problem of overcorrection, and the other corrections can be classed into three ranks: the VECA, b correction and C models performed the best, followed by the Teillet-regression correction model, and the SCS+C, Minnaert and Minnaert-SCS corrections performed the worst. The proposed VECA correction and the b correction are the most capable of removing the topographic effects of the ETM+ image. The VECA is not only simple in theory but also easy to operate, indicating that the VECA is an effective topographic correction tool in remote sensing techniques. [ABSTRACT FROM AUTHOR]