Search

The design, development, fabrication, and testing of a wideband reflectarray antenna with a novel concentric ring element operating over Ku/K band frequencies is presented in this paper. The element characterization is performed using the infinite array approach and is inferred that the proposed unit cell offers a higher phase variation of 643° by changing the size of the concentric rings. The proposed reflectarray antenna has a circular geometry and is constructed using 437 elements with an element separation of 0.43λ0. The proposed reflectarray offers a 3 dB gain bandwidth of 35% (15–21 GHz). The aperture efficiency is estimated to be 58.78% at 16.5 GHz. The prototype reflectarray is fabricated and tested to validate the simulation results. The measured peak gain of the reflectarray is 28.4 dBi with a side lobe level of −17.6 dB. The measured cross‐polarization level is less than −32 dB. Furthermore, it is inferred that the proposed unit cell has a reduced maximum phase sensitivity of 246°/mm with a gain selectivity of 6 dB at the lowest operating frequency. The proposed broadband reflectarray with enhanced performance characteristics is suitable for application in satellite communication and aeronautical radio navigation. [ABSTRACT FROM AUTHOR]

Contemplating the advancements in communication technology, the analysis of the features of reflectarray, transmitarray, and transmit‐reflectarray becomes essential for future adaptability. This article presents a thorough review of such high‐gain antennas, presenting some of the most relevant solutions published by the scientific society in the field of antennas and wave propagation. Several examples of unit cells for array implementation and complete array designs discussed in various literatures are analyzed. The analysis is focused in identifying the unit cell layouts, such as those developed using microstrip patches, frequency selective surfaces, or metamaterials. The analysis is extended to the ways of improving bandwidth, for example, true time delay elements, phase delay lines, meander lines, and so on, and the various methods used to enable reconfiguration, for example, p‐i‐n diodes, varactor diodes, or microelectromechanical systems. In addition, some antennas, which produce bidirectional beams simultaneously, are also discussed. Finally, all the models are compared against each other in order to highlight their benefits and limitations, summarizing their main characteristics, such as the frequency of operation, bandwidth, phase range, gain, aperture efficiency, sidelobe levels, cross polarization levels, and maximum beam‐steering range. [ABSTRACT FROM AUTHOR]

A low profile flexible linear to circular polarizer made of paper substrate is proposed in this paper. The polarizer is constructed from frequency selective surface (FSS) comprising of crossed dipole unit cell elements. The polarizer converts the linearly polarized incident electromagnetic wave to circular polarized wave at 7.0 GHz. The polarizer provides the advantage of use in conformal system, which is substantiated using bending analysis. The proposed reflective polarizer provides a 3 dB axial ratio bandwidth of 13% at the center frequency of 7.0 GHz. In addition, the proposed flexible polarizer provides stable response for angular incidences up to 30°. Prototype of the flexible FSS polarizer is fabricated and its simulation results are validated with experimental measurements. [ABSTRACT FROM AUTHOR]

A novel single layer miniaturized frequency selective surface made of circular unit cell elements is presented in this article. The frequency selective surface (FSS) unit cell measures 0.055λ0 × 0.055λ0, where λ0 corresponds to its free space wavelength. The proposed FSS offers band stop characteristics with bandwidth of 137.5 MHz centered at 1.39 GHz. The symmetrical structure of the unit cell elements provides polarization independency. The miniaturized unit cell elements help achieving angular independency for both TE and TM mode of polarization. The miniaturized design provides excellent angular independency with negligible frequency shift for varying incident angles. A prototype of the FSS is fabricated and its simulation results are validated using measurements. [ABSTRACT FROM AUTHOR]