Search

An adaptive sliding mode fault‐tolerant control strategy is proposed for a quadrotor unmanned aerial vehicle in this article to accommodate actuator faults and model uncertainties. First, a new reaching law is proposed, with which a sliding mode control (SMC) law is constructed. The proposed reaching law is made up of a sliding variable and the distance between it and a designated boundary layer, and it can effectively suppress the unexpected control chattering while preserving the necessary system tracking performance. Then, an adaptive SMC scheme is proposed to further solve the fault and uncertainty compensation problem. The proposed adaptation law helps to prevent overestimation of the adaptive control parameters, as well as avoiding control chattering. Finally, a number of comparative simulation tests are carried out to validate the effectiveness and superiority of the proposed control strategy. The demonstrated quantitative comparison results confirm its advantages. [ABSTRACT FROM AUTHOR]

This article presents a single‐hidden‐layer feedforward network (SLFN) aided fault‐tolerant control (FTC) scheme for a class of nonlinear systems subject to actuator faults. First, the upper bounds of the norms of the unknown functions, which cover information of actuator faults and amplitude saturation degrees, are deployed. The upper bounds are approximated by SLFNs with adaptive techniques. Subsequently, a sliding mode control approach is presented to allow for prompt corrective reactions, with explicit consideration of multivariable conditions and control input constraints. Finally, simulation results based on a nonlinear Boeing 747 aircraft model are presented to demonstrate the effectiveness of the proposed FTC scheme. [ABSTRACT FROM AUTHOR]

Summary An adaptive sliding mode observer (SMO)–based fault‐tolerant control method taking into consideration of actuator saturation is proposed for a hypersonic scramjet vehicle (HSV) under a class of time‐varying actuator faults. The SMO is designed to robustly estimate the HSV states and reconstruct the fault signals. The adaptive technique is integrated into the SMO to approximate the unknown bounds of system uncertainties, actuator faults, and estimation errors. The robust SMO synthesis condition, which can be formulated as a set of linear matrix inequalities, is improved by relaxing structure constraints to the Lyapunov matrix. An anti‐windup feedback control law, which utilizes the estimated HSV states and the fault signals, is designed to counteract the negative effects of actuator saturation induced by actuator faults. Simulation results demonstrate that the proposed approach can guarantee stability and maintain L2 performance of the closed‐loop system in the presence of HSV actuator faults and saturation. [ABSTRACT FROM AUTHOR]

Summary: This paper presents a retrofit fault‐tolerant tracking control (FTTC) design method with application to an unmanned quadrotor helicopter (UQH). The proposed retrofit fault‐tolerant tracking controller is developed to accommodate loss‐of‐effectiveness faults in the actuators of UQH. First, a state feedback tracking controller acting as the normal controller is designed to guarantee the stability and satisfactory performance of UQH in the absence of actuator faults, while actuator dynamics of UQH are also considered in the controller design. Then, a retrofit control mechanism with integration of an adaptive fault estimator and an adaptive fault compensator is devised against the adverse effects of actuator faults. Next, the proposed retrofit FTTC strategy, which is synthesized by the normal controller and an additional reconfigurable fault compensating mechanism, takes over the control of the faulty UQH to asymptotically stabilize the closed‐loop system with an acceptable performance degradation in the presence of actuator faults. Finally, both numerical simulations and practical experiments are conducted in order to demonstrate the effectiveness of the proposed FTTC methodology on the asymptotic convergence of tracking error for several combinations of loss‐of‐effectiveness faults in actuators. [ABSTRACT FROM AUTHOR]

Summary: This paper investigates the attitude stabilization problem of spacecraft subject to external disturbances and actuator saturation. A novel attitude control scheme is technically proposed by incorporating the Nussbaum gain technique into backstepping design. The key idea behind this is to introduce a special Nussbaum‐type function in order to compensate for the time‐varying nonlinear terms arising from input saturation. By exploiting the dynamic surface control technique, the problem of “explosion of terms” inherent in traditional backstepping designs is effectively eliminated and the computational burden is significantly reduced. Additionally, based on the selected Nussbaum‐type function, a constructive analysis methodology is presented, which plays an important role in analyzing the stability properties of the closed‐loop system. It is then proved that the proposed control scheme can guarantee the boundedness of all closed‐loop signals. Furthermore, the unwinding phenomenon is given a simple and effective remedy by resorting to suitable choices of the attitude error variable and the virtual control law. Finally, simulation experiments are carried out to assess the effectiveness and demonstrate the advantages of the proposed control scheme. [ABSTRACT FROM AUTHOR]

This paper presents a methodology for designing an effective fault-tolerant controller (FTC) through the combination of three control techniques: linear parameter varying (LPV), model reference adaptive control (MRAC), and a proportional-integral-derivative (PID) controller. The proposed FTC is tested in a diesel engine generator (DEG), operating as a master generation unit in an autonomous hybrid wind-diesel power system with a battery storage system (BSS). The control objectives are to regulate voltage and frequency of the DEG and to ensure covering the demand load. Frequency regulation is achieved with the help of an MRAC-LPV scheme combining a PID controller tuned by a genetic algorithm (GA) for maintaining the speed of the diesel engine (DE) in a constant value, and in consequence the frequency of the grid. Voltage magnitude control is performed through a constrained variation of the field voltage of the synchronous generator through a classic MRAC. Different operating conditions of the hybrid power system are applied in order to test the controller's robustness: (i) steady-state operation; (ii) sudden connection of a load of 0.5 MW; (iii) a three-phase fault with duration of 0.5 s; and (iv) DE's actuator fault with six different magnitudes. An improved performance is achieved by the proposed scheme over a baseline controller, IEEE type 1 AVR for voltage regulation and a governor with PI controller for frequency regulation. Dynamic models of the microgrid components are presented, and the proposed microgrid and its FTC are implemented and tested in the Simpower Systems of MATLAB/Simulink simulation environment. The simulation results showed that the use of an LPV methodology for designing the MRAC allows the online accommodation of different fault magnitudes in the DE actuator and improves the FTC system performance in comparison with the baseline controller. Copyright © 2014 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]