Search

As the number of long-span bridges continues to grow, wind-induced vibration issues have become increasingly intensified. Among them, flutter is a serious wind-induced vibration that can lead to bridge collapse. To address this problem, this paper proposes inerter-based dampers as a solution for flutter control and compares their performance to traditional tuned mass dampers (TMDs). Firstly, eight distinct inerter-based dampers were proposed, based on various combinations of mass-inerter-spring-damper (MISD) components. Secondly, the equations of motion of the bridge-MISD system were derived based on the two-mode coupled flutter theory and the mechanical impedance analysis method. Thirdly, the flutter control performance of the eight proposed MISDs is examined using a simply supported beam, with the six better-performing dampers further evaluated using the Jiangyin Bridge. The results show that inerter-based dampers can effectively improve the critical flutter wind speed of bridges, with performance sensitive to frequency. Additionally, incorporating an inerter decreases the static displacement of the mass block, while increasing the mass of MISD and the distance between the damper and the section center improves flutter control performance. The optimal spring stiffness ratios for the six MISDs are identified, largely dependent on the damper's inertance and mass. In conclusion, this paper offers a promising solution to addressing flutter in long-span bridges and provides insights into the design and optimization of inerter-based dampers. [ABSTRACT FROM AUTHOR]

In the complex mountain wind environment, especially in the strong wind, fluctuating wind speed is a non-stationary and non-Gaussian random process. With the increase of suspension bridges' span, they are more sensitive to wind-induced vibration response. In this paper, a non-stationary and non-Gaussian buffeting reliability analysis method for long-span bridges is presented. Firstly, the non-stationary wind speed is simulated by the modulation function based on the stationary wind speed model. Secondly, the load is obtained by simulated wind speed, the obtained loads are loaded on the finite element model by ANSYS and the whole bridge time-domain analysis is performed, the time history of displacement response is obtained. Thirdly, based on the first excursion failure criterion of random vibration, the samples of the non-stationary and non-Gaussian displacement time history are transformed into a standard Gaussian process through a modified Fleishman approximation method, and then the non-stationary Poisson distribution method is used for structural reliability analysis. Finally, a mountainous long-span suspension bridge is used as the engineering background, and the proposed reliability analysis method is applied to analyze the reliability of the bridge. The influence of different wind attack angles and modulation functions on the dynamic reliability of the bridge is further studied. The results indicate that the displacement response obtained by the transformation of non-stationary and non-Gaussian random process is less reliable than that obtained by traditional analysis method. Its dynamic reliability is maximum at 1 ∘ wind attack angle, the reliability of negative wind attack angle is lower than that of positive wind attack angle, and decreases with the increase of wind attack angle. The reliability obtained by using different modulation functions is lower than that of traditional method. If the traditional analysis method is still used for reliability analysis, it will produce unsafe consequences and reduce the engineering safety reserve. [ABSTRACT FROM AUTHOR]

Flexible suspension bridges are susceptible to aerodynamic instability phenomena. In this paper, the torsional divergence is addressed in terms of underlying mechanism, 3D and turbulence effects. A 3D generalized analytical model is first established by reasonable simplification of the model. Comparisons among results from different models are performed. The mechanisms of symmetric and asymmetric torsional divergence are explored. Finally, the 3D and turbulence effects are investigated. The results show that the proposed 3D generalized model is feasible for estimating the critical wind speed of asymmetric torsional divergence, and its computational accuracy is higher than the method provided by the code. The effects of turbulence on torsional divergence are multifaceted: the buffeting response due to wind fluctuations can significantly reduce the aerostatic stability of the bridge, resulting in a much lower critical wind speed than that in a smooth flow; the threshold of divergence is ambiguous and the instability is intermittent; further, the left and right quarter span sections largely vibrate in opposite directions during asymmetric torsional divergence. [ABSTRACT FROM AUTHOR]

In the event of partial damage to the wind barriers installed on a bridge, the wind loads of a train will change abruptly as they enter and exit the damaged area, resulting in the deterioration of the train running safety. This study aimed to assess the running safety of a CRH2 high-speed train traversing a four-tower cable-stayed bridge with damaged wind barriers. Formulas were deduced for the static and dynamic wind loads on the bridge and train and their combined effect. The aerodynamic coefficients of the train and bridge were obtained through wind tunnel tests of a train–bridge sectional model, and a model of the wind–train–track–bridge coupled system was established using multi-body dynamics and the finite element method. The effects of the length of the damaged area and average wind speed on the train running safety were investigated based on the proposed model. The results reveal that the car body lateral displacements and accelerations reach their maximum amplitudes when the vehicles enter and leave the damaged area, respectively. The amplitude of the car body lateral displacement increases as the length of the damaged area increases, until it reaches 72 m. The wheel load reduction rates (WLRRs) and derailment coefficients (DCs) of the vehicles increase owing to the damage of the wind barriers; however, the percentage increases for each vehicle are considerably different. The train can safely traverse the damaged area of wind barriers at a designed speed of 180 km/h when the average wind speed is lower than 10 m/s. When the average wind speed reaches 20 m/s, the train can still safely cross the damaged area if the length of the damaged area is less than 12 m. [ABSTRACT FROM AUTHOR]

To evaluate the crosswind stability (overturning and sideslip) of vehicles driving on the bridge, obtaining critical wind speed is essential. The traditional method is based on the aerodynamic forces of moving vehicles on the bridge and the analysis of force equilibrations. However, various shapes of the bridge make the flow field around the vehicle on the bridge very complicated to obtain. In this paper, a simplified method is introduced to calculate the critical wind speeds of moving vehicles on bridges based on the influence of coefficients of the wind environment on the bridge and the aerodynamic forces of moving vehicles on open fields. The aerodynamic forces of moving vehicles are simulated with dynamic mesh techniques. Besides, the characteristics of the wind environment on the bridge deck are studied to evaluate the driving safety and determine the influence coefficient. To further demonstrate the reliability, critical wind speed in different road conditions of the proposed simplified method shows very good agreement with the traditional method. [ABSTRACT FROM AUTHOR]

In this study, the influences of wind barriers on the aerodynamic characteristics of trains (e.g. a CRH2 train) on a highway-railway one-story bridge were investigated by using wind pressure measurement tests, and a reduction factor of overturning moment coefficients was analyzed for trains under wind barriers. Subsequently, based on a joint simulation employing SIMPACK and ANSYS, a wind–train–track–bridge system coupled vibration model was established, and the safety and comfort indexes of trains on the bridge were studied under different wind barrier parameters. The results show that the mean wind pressures and fluctuating wind pressures on the trains' surface decrease generally if wind barriers are used. As a result, the dynamic responses of the trains also decrease in the whole process of crossing the bridge. Of particular note, the rate of the wheel load reductions and lateral wheel-axle forces can change from unsafe states to relative safe states due to the wind barriers. The influence of the porosity of the wind barriers on the mean wind pressures and fluctuating wind pressures on the windward sides and near the top corner surfaces of the trains are significantly greater than the influence from the height of the wind barriers. Within a certain range, decreasing the wind barrier porosities and increasing the wind barrier heights will significantly reduce the safety and comfort index values of trains on the bridge. It is found that when the porosity of the wind barrier is 40%, the optimal height of the wind barrier is determined as approximately 3.5 m. At this height, the trains on the bridges are safer and run more smoothly and comfortably. Besides, through the dynamic response analysis of the wind–train–track–bridge system, it is found that the installation of wind barriers in cases with high wind speeds (30 m/s) may have an adverse effect on the vertical vibration of the train–track–bridge system. [ABSTRACT FROM AUTHOR]

Based on the aerostatic and self-excited aerodynamic force models, a computational approach of three-dimensional (3D) refined flutter analysis for long-span bridges under skew winds is established, in which the structural nonlinearity, aerostatic effect and full-mode coupling effect, etc., are fully considered, and the computational procedure (N flutter-sw) is developed accordingly. By taking the Runyang Suspension Bridge over the Yangtze river as an example, under the wind attack with initial angles of 0∘ and ± 3 ∘ and yaw angles between 0∘ and 25∘, the flutter stability of the bridge in completion under skew winds is analyzed, and the influences of skew wind and aerostatic effect on the flutter stability of suspension bridges are assessed. The results show that the aerostatic effect has a significant influence on the flutter stability of long-span suspension bridge, and it may worsen its flutter stability, with an average decrease of 6.0%. However, it does not change the evolution of flutter stability of suspension bridge with increasing wind yaw angle. The critical flutter wind speed fluctuates with the increase of wind yaw angle, and it reaches the lowest value mostly under the skew wind, with an average reduction of 8.0%. The combined influence of the aerostatic effect and skew wind further reduces the flutter critical wind speed by 11.5% on average, and therefore, the aerostatic effect, skew wind effect and their adverse influences need to be comprehensively considered in the flutter analysis of long-span suspension bridges. [ABSTRACT FROM AUTHOR]

The purpose of this study is to investigate the flutter control scheme of super long-span bridges with various aspect ratios (e.g. width to height (B/H)) using passive aerodynamic countermeasures. Through a series of wind tunnel testing and theoretical analysis, three types of passive aerodynamic countermeasures, i.e. vertical central stabilizer (VCS), wind barrier and inspection rail, were investigated for five typical aspect ratios of a closed-box girder bridge. The results show that both the aspect ratio and flutter critical wind speed generally increase with the decrease of the ratio of torsional and vertical frequencies of the bridge. In the case of an aspect ratio of 8.9, a downward VCS (DVCS) has a much better flutter performance than that of an upward VCS (UVCS) because aerodynamic damping of Part A and Part D could produce a higher heaving degree of freedom (DOF) participation level. Furthermore, the position variation of wind barriers is superior to their shape variation for the bridge with an aspect ratio of 8.3, and the flutter performance of the girder with a combination of the wind barrier (WB3P3) and UDVCS with 0.3 h/H DVCS appears to be better than that without countermeasures. In addition, the installation of an inspection rail near the bottom point of an inclined-web (IR3) has the best flutter control effect among four positions of inspection rails. [ABSTRACT FROM AUTHOR]