Search

For the implementation of a closed nuclear fuel cycle it is necessary to carry out a series of experimental studies to justify the choice of technology. In addition, the operation of the radiochemical plant is impossible without high-quality automatic control systems. In the technologies of spent nuclear fuel reprocessing, the method of continuous evaporation is often used for a solution conditioning. Therefore, the effective continuous technological process will depend on the operation of the evaporation equipment. Its essential difference from similar devices is a small size. In this paper the method of mathematic simulation is applied for the investigation of one-effect evaporator with an external heating chamber. Detailed modelling is quite difficult because the phase equilibrium dynamics of the evaporation process is not described. Moreover, there is a relationship with the other process units. The results proved that the study subject is a MIMO plant, nonlinear over separate control channels and not selfbalancing. Adequacy was tested using the experimental data obtained at the laboratory evaporation unit.

Optical waveguides on glass substrates are a promising area in their application in simple and cheap optoelectronic devices. As shown in [1], the highest refractive index is achieved during the formation of waveguides by oxidized film diffusion. However, realization of a number of electro-optical effects is restrained by probabilistic repeatability of wave guiding layers which holds down the development of optoelectronics [1-3]. This happens due to the fact that film formation in gas exchange mode isn't explored enough. One of the reasons of probabilistic repeatability of local thickness and film composition is dynamic processes which happen during the material evaporation. The regularities of evaporation, which were earlier found by Knudsen, Langmuir and other scientists for point sources, fail when it comes to the line where one material escape into another state. Most materials, which have three states - solid, liquid, gaseous - at ambient pressure heating, in vacuum, lose their liquid state partly or completely. Moreover, the film distribution over the substrate is quite unclear because of the poor study of molecular vapor flow and substrate interaction.