Search

Urbanised city transportation simulation needs a wide range of factors to reflect the influence of certain real-life events accurately. The vehicle composition and the timing of the traffic light signal scheduling play an important role in controlling the traffic flow and facilitate road users, particularly in densely populated urban cities. Since road capacity in urban cities changes throughout the day, an optimal traffic light signal duration might be different. Hence, in this paper, the effect of vehicle composition and traffic light phases on traffic flow during peak and off-peak hours in Georgetown, Penang, one of the highly populated cities in Malaysia, is investigated. Through Agent-Based Modelling (ABM), this complex system is simulated by integrating the driver's behaviour into the model using the GIS and Agent-Based Modelling Architecture (GAMA) simulation platform. The result of predicted traffic flow varies significantly depending on the vehicle composition while the duration of the traffic signal timing has little impact on traffic flow during peak hours. However, during off-peak hour, it is suggested that 20 s duration of green light provides the highest flow compared to 30 s and 40 s duration of green light. This concludes that the planning for traffic light phasing should consider multiple factors since the vehicle composition and traffic light timing for an effective traffic flow varies according to the volume of road users. [ABSTRACT FROM AUTHOR]

Urbanised city transportation simulation needs a wide range of factors to reflect the influence of certain real-life events accurately. The vehicle composition and the timing of the traffic light signal scheduling play an important role in controlling the traffic flow and facilitate road users, particularly in densely populated urban cities. Since road capacity in urban cities changes throughout the day, an optimal traffic light signal duration might be different. Hence, in this paper, the effect of vehicle composition and traffic light phases on traffic flow during peak and off-peak hours in Georgetown, Penang, one of the highly populated cities in Malaysia, is investigated. Through Agent-Based Modelling (ABM), this complex system is simulated by integrating the driver’s behaviour into the model using the GIS and Agent-Based Modelling Architecture (GAMA) simulation platform. The result of predicted traffic flow varies significantly depending on the vehicle composition while the duration of the traffic signal timing has little impact on traffic flow during peak hours. However, during off-peak hour, it is suggested that 20 s duration of green light provides the highest flow compared to 30 s and 40 s duration of green light. This concludes that the planning for traffic light phasing should consider multiple factors since the vehicle composition and traffic light timing for an effective traffic flow varies according to the volume of road users.

The development of a European Spatial Data Infrastructure (SDI) officially started with the entry into force of the INSPIRE Directive in 2007. INSPIRE’s implementation phase should be completed by the European Union (EU) and its member states at the end of 2021: a pivotal point to evaluate INSPIRE’s current governance and explore future scenarios. First, INSPIRE’s governing system is evaluated through an online survey by its involved stakeholders. Second, these results are applied in an agent-based model to explore potential governance scenarios and strategies. The results show that strong aspects of INSPIRE’s governing system are the supported vision and its formal structures, such as standards, technology and roles and responsibilities. Weak aspects are the access to resources, especially budget and time resources, and data use. The agent-based simulations show that INSPIRE is probably more constrained by its budget resources than its current dominant hierarchical interaction mix, although a combination of adaptive governance and continuous budget proved the most sustainable governance scenario.

Current spatiotemporal data has facilitated movement studies to shift objectives from descriptive models to explanations of the underlying causes of movement. From both a practical and theoretical standpoint, progress in developing approaches for these explanations should be founded on a conceptual model. This paper presents such a model in which three conceptual levels of abstraction are proposed to frame an agent-based representation of movement decision-making processes: ‘attribute,’ ‘actor,’ and ‘autonomous agent’. These in combination with three temporal, spatial, and spatiotemporal general forms of observations distinguish nine (3 × 3) representation typologies of movement data within the agent framework. Thirdly, there are three levels of cognitive reasoning: ‘association,’ ‘intervention,’ and ‘counterfactual’. This makes for 27 possible types of operation embedded in a conceptual cube with the level of abstraction, type of observation, and degree of cognitive reasoning forming the three axes. The conceptual model is an arena where movement queries and the statement of relevant objectives takes place. An example implementation of a tightly constrained spatiotemporal scenario to ground the agent-structure was summarised. The platform has been well-defined so as to accommodate different tools and techniques to drive causal inference in computational movement analysis as an immediate future step.

Modelling the complex nature of regional knowledge creation is high on the research agenda. It deals with the identification of drivers for regional knowledge creation of different kinds, among them inter-regional networks and agglomeration factors, as well as their interplay; i.e., in which way they influence regional knowledge creation and accordingly, innovation capabilities—in the short- and long-term. Complementing a long line of tradition—establishing a link between regional knowledge input indicators and knowledge output in a regression framework—we propose an empirically founded agent-based simulation model that intends to approximate the complex nature of the multi-regional knowledge creation process for European regions. Specifically, we account for region-internal characteristics, and a specific embedding in the system of region-internal and region-external R&D collaboration linkages. With first exemplary applications, we demonstrate the potential of the model in terms of its robustness and empirical closeness. The model enables the replication of phenomena and current scientific issues of interest in the field of geography of innovation and hence, shows its potential to advance the scientific debate in this field in the future.

Conventionally, agent-based modelling approaches start from a conceptual model capturing the theoretical understanding of the systems of interest. Simulation outcomes are then used "at the end" to validate the conceptual understanding. In today's data rich era, there are suggestions that models should be data-driven. Data-driven workflows are common in mathematical models. However, their application to agent-based models is still in its infancy. Integration of real-time sensor data into modelling workflows opens up the possibility of comparing simulations against real data during the model run. Calibration and validation procedures thus become automated processes that are iteratively executed during the simulation. We hypothesize that incorporation of real-time sensor data into agent-based models improves the predictive ability of such models. In particular, that such integration results in increasingly well calibrated model parameters and rule sets. In this contribution, we explore this question by implementing a flocking model that evolves in real-time. Specifically, we use genetic algorithms approach to simulate representative parameters to describe flight routes of homing pigeons. The navigation parameters of pigeons are simulated and dynamically evaluated against emulated GPS sensor data streams and optimised based on the fitness of candidate parameters. As a result, the model was able to accurately simulate the relative-turn angles and step-distance of homing pigeons. Further, the optimised parameters could replicate loops, which are common patterns in flight tracks of homing pigeons. Finally, the use of genetic algorithms in this study allowed for a simultaneous data-driven optimization and sensitivity analysis. [ABSTRACT FROM AUTHOR]

Conventionally, agent-based modelling approaches start from a conceptual model capturing the theoretical understanding of the systems of interest. Simulation outcomes are then used “at the end” to validate the conceptual understanding. In today’s data rich era, there are suggestions that models should be data-driven. Data-driven workflows are common in mathematical models. However, their application to agent-based models is still in its infancy. Integration of real-time sensor data into modelling workflows opens up the possibility of comparing simulations against real data during the model run. Calibration and validation procedures thus become automated processes that are iteratively executed during the simulation. We hypothesize that incorporation of real-time sensor data into agent-based models improves the predictive ability of such models. In particular, that such integration results in increasingly well calibrated model parameters and rule sets. In this contribution, we explore this question by implementing a flocking model that evolves in real-time. Specifically, we use genetic algorithms approach to simulate representative parameters to describe flight routes of homing pigeons. The navigation parameters of pigeons are simulated and dynamically evaluated against emulated GPS sensor data streams and optimised based on the fitness of candidate parameters. As a result, the model was able to accurately simulate the relative-turn angles and step-distance of homing pigeons. Further, the optimised parameters could replicate loops, which are common patterns in flight tracks of homing pigeons. Finally, the use of genetic algorithms in this study allowed for a simultaneous data-driven optimization and sensitivity analysis.

The development of a European Spatial Data Infrastructure (SDI) officially started with the entry into force of the INSPIRE Directive in 2007. INSPIRE's implementation phase should be completed by the European Union (EU) and its member states at the end of 2021: a pivotal point to evaluate INSPIRE's current governance and explore future scenarios. First, INSPIRE's governing system is evaluated through an online survey by its involved stakeholders. Second, these results are applied in an agent-based model to explore potential governance scenarios and strategies. The results show that strong aspects of INSPIRE's governing system are the supported vision and its formal structures, such as standards, technology and roles and responsibilities. Weak aspects are the access to resources, especially budget and time resources, and data use. The agent-based simulations show that INSPIRE is probably more constrained by its budget resources than its current dominant hierarchical interaction mix, although a combination of adaptive governance and continuous budget proved the most sustainable governance scenario. [ABSTRACT FROM AUTHOR]

Current spatiotemporal data has facilitated movement studies to shift objectives from descriptive models to explanations of the underlying causes of movement. From both a practical and theoretical standpoint, progress in developing approaches for these explanations should be founded on a conceptual model. This paper presents such a model in which three conceptual levels of abstraction are proposed to frame an agent-based representation of movement decision-making processes: 'attribute,' 'actor,' and 'autonomous agent'. These in combination with three temporal, spatial, and spatiotemporal general forms of observations distinguish nine (3 × 3) representation typologies of movement data within the agent framework. Thirdly, there are three levels of cognitive reasoning: 'association,' 'intervention,' and 'counterfactual'. This makes for 27 possible types of operation embedded in a conceptual cube with the level of abstraction, type of observation, and degree of cognitive reasoning forming the three axes. The conceptual model is an arena where movement queries and the statement of relevant objectives takes place. An example implementation of a tightly constrained spatiotemporal scenario to ground the agent-structure was summarised. The platform has been well-defined so as to accommodate different tools and techniques to drive causal inference in computational movement analysis as an immediate future step. [ABSTRACT FROM AUTHOR]