Search

Summary Stacking perovskite solar cells onto crystalline silicon bottom cells in a monolithic tandem configuration enables power-conversion efficiencies (PCEs) well above those of their single-junction counterparts. However, state-of-the-art wide-band-gap perovskite films suffer from phase stability issues. Here, we show how carbazole as an additive to the perovskite precursor solution can not only reduce nonradiative recombination losses but, perhaps more importantly, also can suppress phase segregation under exposure to moisture and light illumination. This enables a stabilized PCE of 28.6% (independently certified at 28.2%) for a monolithic perovskite/silicon tandem solar cell over ∼1 cm2 and 27.1% over 3.8 cm2, built from a textured silicon heterojunction solar cell. The modified tandem devices retain ∼93% of their performance over 43 days in a hot and humid outdoor environment of almost 100% relative humidity over 250 h under continuous 1-sun illumination and about 87% during a 85/85 damp-heat test for 500 h, demonstrating the improved phase stability.

Summary Stable and efficient perovskite/silicon tandem solar cells require defect passivation and suppression of light-induced phase segregation of the wide-band-gap perovskite. Here, we report how molecules containing both electron-rich and electron-poor moieties, such as phenformin hydrochloride (PhenHCl), can satisfy both requirements, independent of the perovskite’s surface chemical composition and its grain boundaries and interfaces. PhenHCl-passivated wide-band-gap (∼1.68 eV) perovskite p-i-n single-junction solar cells deliver an open-circuit voltage (VOC) ∼100 mV higher than control devices, resulting in power conversion efficiencies (PCEs) up to 20.5%. These devices do not show any VOC losses after more than 3,000 h of thermal stress at 85°C in a nitrogen ambient. Moreover, PhenHCl passivation improves the PCE of textured perovskite/silicon tandem solar cells from 25.4% to 27.4%. Our findings provide critical insights for improved passivation of metal halide perovskite surfaces and the fabrication of highly efficient and stable perovskite-based single-junction and tandem solar cells.

Summary Mixed lead halide perovskite solar cells have been demonstrated to benefit tremendously from the addition of Cs+ and Rb+, but its root cause is yet to be understood. This hinders further improvement, and processing approaches remain largely empirical. We address the challenge by tracking the solidification of precursors in situ and linking the evolutions of different crystalline phases to the presence of Cs+ and Rb+. In their absence, the perovskite film is inherently unstable, segregating into MA-I- and FA-Br-rich phases. Adding either Cs+ or Rb+ is shown to alter the solidification process of the perovskite films. The optimal addition of both Cs+ and Rb+ drastically suppress phase segregation and promotes the spontaneous formation of the desired α phase. We propose that the synergistic effect is due to the collective benefits of Cs+ and Rb+ on the formation kinetics of the α phase and on the halide distribution throughout the film.

Summary High-performance passivating contact is a prerequisite for high-efficiency crystalline silicon (c-Si) solar cells. In this work, an electron-conductive, hole-blocking contact based on titanium nitride (TiN) deposited by reactive magnetron sputtering is presented. Quasi-metallic TiN combined with an ultrathin SiO2 passivation layer (SiO2/TiN) is demonstrated to be an effective electron-selective contact on c-Si, featuring a low-contact resistivity of 16.4 mΩ.cm2 and a tolerable recombination current parameter of ∼500 fA/cm2. By implementing the dual-function SiO2/TiN contact, which acts simultaneously as a surface passivating layer and metal electrode, an efficiency of 20% is achieved by an n-type c-Si solar cell with a simple structure. This work not only demonstrates a way to develop efficient n-type c-Si solar cells with dual-function metal nitride contacts at a low cost but also expands the pool of available carrier transport materials, from metal oxides to metal nitrides, for photovoltaic devices.