Search

Purpose: This retrospective case series of 9 patients aimed to describe clinical outcomes and patient satisfaction following the implementation of the posterior Dahl concept to manage localized posterior tooth wear. Materials and Methods: Localized occlusal space was created in the posterior dentition. Supra-occluding direct restorations were placed bilaterally for the restoration of molars. Intraoral scans were taken at the pre-treatment stage, immediately post-restoration, and during follow-up appointments. Scans were used to undertake analysis of any occlusal changes and re-establishment of the occlusion. A questionnaire was used to assess patient satisfaction, alleviation of any pre-treatment concerns, and evaluation of post-treatment complaints. Results: Immediately post-treatment, all patients showed an increase in the vertical dimension. Opening of the bite in the untreated areas following restoration of worn posterior molars resulted either in a tendency towards or the actual reestablishment of the occlusion. One patient completely lacked compensatory vertical tooth movement in the untreated areas, culminating in the persistence of a vertical open bite. One restoration displayed cohesive fracture after 4 months. Pre-treatment problems (eg, sensitivity) were fully resolved amongst all patients after 6 months. Post-treatment complaints were minor and demonstrated resolution within a relatively short period of time. Eight patients reported being “very satisfied” with their treatment outcomes. Conclusion: Application of the posterior Dahl concept appears to offer a promising, relatively simple, minimally invasive and effective approach for the management of localized posterior tooth wear, which is well accepted by patients. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this prospective study was to evaluate the clinical performance of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in patients with severe tooth wear, the effect of the restorative treatment on the oral health-related quality of life (OHRQoL), and the etiology of tooth wear as a risk factor for restoration failure. Materials and Methods: Patients with generalized severe tooth wear were included. Restorations (LAVA Ultimate, 3M Oral Care) were cemented (RelyX Ultimate, 3M Oral Care) on all teeth and were evaluated after 1 month and 1 year. OHRQoL was assessed via questionnaires at baseline and after 1 year. Differences were evaluated (paired t-test). Two mechanical tooth-wear lesions resulting from tooth-tooth contact, and 3 chemical tooth wear lesions resulting from intrinsic or extrinsic acids dissolving natural hard tooth substance, were evaluated to assess the etiology of tooth wear in association with restoration failure using multilevel logistic regression analyses (p < 0.05). Results: Twenty-one patients (age: 41.7 ± 10.4 years) were evaluated after 1 year (13.5 ± 1.2 months). 568 indirect CAD/CAM restorations were placed. None were replaced or lost. Twelve were repaired and 10 were refurbished. Success rates were 100% to 97.2%. Questionnaires showed a significant positive impact of the treatment on OHRQoL (p < 0.001). The presence of mechanical lesions did not pose a higher risk for restoration failure (p = 0.78). The presence of chemical lesions showed a lower risk of restoration failure (p = 0.002). Conclusion: The use of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in the restorative treatment of severely worn dentitions showed satisfactory results in the short term. [ABSTRACT FROM AUTHOR]

Purpose: This study investigated the ability of two chewing simulation devices to emulate in vitro the clinical deterioration observed in anterior composite restorations in severe tooth-wear patients. Materials and Methods: Advanced tooth wear was simulated in bovine incisors, which were restored with palatal and buccal direct composite veneer restorations. The incisal edges of restorations were subjected to 960K cycles of either compressive loading (Biocycle-V2; 125 N at 2 Hz) or wear and mechanical loading (Rub&Roll; 30 N at 20 rpm). Surface degradation was rated using FDI scores to compare the chewing devices (Fisher's test, a = 0.05). Topography and deterioration of restorations was analyzed using SEM. The ability to emulate the deterioration was investigated by comparing the surface degradation observed in vitro with the clinical degradation observed in restorations placed in severe tooth-wear patients after 3.5 years. Results: Distinct degradation patterns were observed between the simulation devices: Biocycle-V2 generated deterioration that was not comparable to the clinical situation, including contact damage, minor wear, and localized roughening. The degradation caused by Rub&Roll was more similar to the in vivo situation, including wear facets, chipping, delamination, staining, and marginal ditching. The FDI scores were different between the chewing devices for surface/marginal staining, material/retention, and marginal adaptation (p = 0.003). SEM analysis showed microcracking at the interface between composite layers at the incisal edges. Conclusions: The Rub&Roll chewing device was able to emulate the clinical deterioration observed in anterior restorations in severe tooth-wear patients and thus may be used as an oral-cavity simulation method, contributing to translational research. [ABSTRACT FROM AUTHOR]

Purpose: To systematically review the literature to determine whether silane combined with adhesive application improves the repair bond strength of direct methacrylate-based resin composites in comparison to the use of an adhesive alone. Materials and Methods: The literature up to December 2019 was searched through PubMed/MEDLINE, Scopus, and Lilacs databases with no publication year or language limits. From 676 potentially eligible studies, 81 were selected for full-text analysis, and 19 were included in the systematic review. Two reviewers independently selected the studies, extracted data, and assessed the risk of bias. Meta-analyses were conducted using a random effects model to calculate pooled mean differences between adhesive- vs silane-plus-adhesive surface treatments (global meta-analysis) and considering subgroup analyses (immediate and aged repair bond strengths and type of silane - hydrolyzed or nonhydrolyzed). Statistical analyses were performed using RevMan5.3 at a significance level of 5%. Results: Global meta-analysis showed that the use of silane prior to adhesive application produced significantly higher repair bond strengths (p=0.003). A higher mean difference (effect size: 7.30, 95% CI: 2.91-17.51) between groups was found when nonhydrolyzed silanes were used. The heterogeneity was high. Studies scored between medium and high risk of bias. Conclusion: An additional silane application step could increase the repair bond strength of methacrylate-based resin composites. [ABSTRACT FROM AUTHOR]

Purpose: To investigate longevity and reasons for failure of Class II posterior composite restorations (PCRs) placed with or without a lining of glass-ionomer cement. Materials and Methods: Four hundred fifty-eight Class II PCR placed in 248 patients (110 male, 138 female, age 18 to 80) by two dentists in a general practice between 1988 and 1997 were retrospectively examined from the patient files. The restorations were placed either with a total-etch technique or with a resin-modified glass-ionomer lining placed on the dentin. Items recorded were date of placement, date of last check-up visit, tooth number, and restored surfaces. Date of replacement and reason for failure of the PCR was recorded. A restoration was clinically acceptable when still in function and acceptable at the last check-up visit. Additionally, the caries risk for each patient was estimated by the treating clinician. Life tables and Kaplan-Meier curves were used to express survival rates. A Cox regression was applied to assess the influence of variables on survival. Results: Three hundred seventy-six total-etch PCRs and 82 PCRs with a lining were investigated. After 9 years, survival percentages of 88.1% for total-etch restorations and 70.5% for restorations with a resin-modified glass-ionomer lining were found. The most important reasons for failure were fracture and caries. Predominantly, failures started occurring after 3 to 4 years of clinical service. Results of the Cox regression show that the presence of a lining and high risk for caries significantly increased the failure rate of the restorations. Conclusion: PCRs placed with a resin-modified glass-ionomer lining clinically showed more frequent fractures than PCRs placed with a total-etch technique. [ABSTRACT FROM AUTHOR]

Purpose: To investigate the influence of composite resin consistency and placement technique on proximal contact tightness of Class II composite resin restorations. Materials and Methods: A manikin model (KaVo Dental) was used with an artificial first molar in which a standardized MO preparation was ground. This preparation was duplicated 360 times. Cavities were restored using Clearfil Photo Bond (Kuraray) combined with one of three composite resins of different consistencies: a low-viscosity (X-Flow, Dentsply), a medium-viscosity (Clearfil AP-X, Kuraray) and a high-viscosity composite (Tetric Ceram HB, Ivoclar Vivadent). Each composite was combined with 6 different matrix systems and separation techniques (n = 20). Groups 1 and 2: pre-contoured metal circumferential matrix (KerrHawe 1101-c) in a Tofflemire retainer combined either with hand instrument (OptraContact, Ivoclar Vivadent) or separation ring (Composi-Tight Gold, Garrison Dental Solutions). Group 3: pre-contoured metal sectional matrix (Lite-Flex, Danville Materials) with separation ring. Groups 4 and 5: precontoured metal circumferential dead-soft matrix (Adapt SuperCap, KerrHawe) with or without separation ring. Group 6: flat metal circumferential matrix (OptraMatrix, Ivoclar Vivadent) in a Tofflemire-retainer with hand instrument (OptraContact). Proximal contact tightness was measured using the Tooth Pressure Meter (University of Technology, Delft). To determine the effect of experimental variables on the proximal contact tightness, a multiple linear regression model was constructed. Results: Measurements in group 6 were not possible; therefore, this group was excluded. The use of medium- or high-viscosity instead of a low-viscosity composite resin resulted in statistically significantly tighter proximal contacts (p < 0.01). The use of a separation ring resulted in a large, statistically significant increase (p < 0.001) in contact tightness, while the use of a hand instrument resulted in a small, statistically significant increase of contact tightness (p = 0.017). No statistically significant differences were found when a dead-soft matrix or a sectional matrix was used instead of a Tofflemire (p = 0.159, p = 0.261, resp.). Conclusion: Use of a separation ring when restoring a Class II composite resin restoration has a greater influence on the obtained proximal contact tightness compared to the influence of the consistency of the composite resin. [ABSTRACT FROM AUTHOR]

Purpose: To describe the digital workflow applied for restoring a severely worn dentition with minimally invasive CAD/CAM resin nano-composite restorations., Materials and Methods: A 40-year-old male in good general health and with full-arch dentition suffered from dentin hypersensitivity and wanted to improve the esthetics of his worn anterior teeth. The dental wear can be described as general, grade 3, according to the Tooth Wear Index,27 with more wear in maxillary than in mandibular teeth. Signs and symptoms were typical for a chemical type of wear, with some mechanical wear also apparent. No functional problems, eg, impaired chewing, were present. On the OHIP-49 questionnaire, the patient expressed a reduced quality of life. The goal of the treatment was to reconstruct the anatomical form of the teeth as far as possible, thereby also improving quality of life. Due to the rather large volume of lost tooth tissue per tooth, indirect treatment using CAD/CAM resin nano-composite restorations (LAVA Ultimate, 3M Oral Care) was applied., Results: The seating of the CAD/CAM resin nano-composite restorations (LAVA Ultimate, 3M Oral Care) restorations was considered precise., Conclusion: In the treatment of severe tooth wear, the described digital workflow using CAD/CAM restorations for occluding restorations and direct composite materials in the esthetic zone is a potential treatment modality that is workable and minimally invasive.

Purpose: The aim of this prospective study was to evaluate the clinical performance of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in patients with severe tooth wear, the effect of the restorative treatment on the oral health-related quality of life (OHRQoL), and the etiology of tooth wear as a risk factor for restoration failure., Materials and Methods: Patients with generalized severe tooth wear were included. Restorations (LAVA Ultimate, 3M Oral Care) were cemented (RelyX Ultimate, 3M Oral Care) on all teeth and were evaluated after 1 month and 1 year. OHRQoL was assessed via questionnaires at baseline and after 1 year. Differences were evaluated (paired t-test). Two mechanical tooth-wear lesions resulting from tooth-tooth contact, and 3 chemical tooth wear lesions resulting from intrinsic or extrinsic acids dissolving natural hard tooth substance, were evaluated to assess the etiology of tooth wear in association with restoration failure using multilevel logistic regression analyses (p < 0.05)., Results: Twenty-one patients (age: 41.7 ± 10.4 years) were evaluated after 1 year (13.5 ± 1.2 months). 568 indirect CAD/CAM restorations were placed. None were replaced or lost. Twelve were repaired and 10 were refurbished. Success rates were 100% to 97.2%. Questionnaires showed a significant positive impact of the treatment on OHRQoL (p < 0.001). The presence of mechanical lesions did not pose a higher risk for restoration failure (p = 0.78). The presence of chemical lesions showed a lower risk of restoration failure (p = 0.002)., Conclusion: The use of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in the restorative treatment of severely worn dentitions showed satisfactory results in the short term.

Purpose: To systematically review the literature to determine whether silane combined with adhesive application improves the repair bond strength of direct methacrylate-based resin composites in comparison to the use of an adhesive alone., Materials and Methods: The literature up to December 2019 was searched through PubMed/MEDLINE, Scopus, and Lilacs databases with no publication year or language limits. From 676 potentially eligible studies, 81 were selected for full-text analysis, and 19 were included in the systematic review. Two reviewers independently selected the studies, extracted data, and assessed the risk of bias. Meta-analyses were conducted using a random effects model to calculate pooled mean differences between adhesive- vs silane-plus-adhesive surface treatments (global meta-analysis) and considering subgroup analyses (immediate and aged repair bond strengths and type of silane - hydrolyzed or nonhydrolyzed). Statistical analyses were performed using RevMan5.3 at a significance level of 5%., Results: Global meta-analysis showed that the use of silane prior to adhesive application produced significantly higher repair bond strengths (p=0.003). A higher mean difference (effect size: 7.30, 95% CI: 2.91-17.51) between groups was found when nonhydrolyzed silanes were used. The heterogeneity was high. Studies scored between medium and high risk of bias., Conclusion: An additional silane application step could increase the repair bond strength of methacrylate-based resin composites.