Search

The increase in the demand for energy supply during the past few decades has brought and will bring to a growth in the utilisation of renewable resources, in particular of solid biomasses. Considering the variability in the properties of biomass and the globalisation of the timber market, a chemical and physical characterisation is essential to determine the biomass quality. The specific international standards on solid biofuels (ISO 17225 series) describe proper specification and classification of wood chip and pellet, to ensure appropriate quality. Moreover, standard requires information about origin and source of the biomass, normally only to be declared by the producers. In order tofulfill the requirements for the biomass quality, the origin and the source should be assessed, even if currently is hard to determine, in particular on milled or densified biomass. Infrared spectroscopy can provide information on the biomass at the chemical level, directly linked also to its origin and source. This technique is fast and not destructive thus suitable alsofor online monitoring along the biofuel production chain. In this study, 60 samples belonging to 8 different species were collected and related spectra were acquired using a Fourier transform infrared (IR) spectrometer equipped with a module for solid analysis and analysed by principal component analysis. The results obtained show that the method is very efficient in the identification between coniferous and deciduous wood (99% confidence level) and good results were obtained in the recognition of coniferous/deciduous mixtures, too. Nevertheless, some clear differences have been also noted among intra-class grouping, but additional tests should be carried out. This technique can provide useful information to solid biofuel stakeholders about wood quality and origin, important especially for sustainability issues. Further work will be oriented to the development of IR methodologies for the fast measurement of other important biomass parameters (e.g., ash content, high calorific value, nitrogen content, etc.). [ABSTRACT FROM AUTHOR]

The role of biomass for increasing renewable energy sources mix is considered fundamental, despite some negative environmental impact of first-generation biofuels. The use of biomass obtained in a more sustainable way, as represented by agricultural wastes, should be favoured. The Mediterranean area and Italy in particular offer a large amount of vineyard pruning residues that can be converted into bioenergy. Since vineyards are exposed to treatments based on copper (Cu) and zinc, these metals last in wood residues during pruning and accumulate in the soil. In this study an evaluation of the concentrations of copper and other heavy metals in grapevine pruning wastes, when treated with common plant protection products, was carried out. The study was also extended to the soil, being potentially mixed to the biomass in the case of mechanical collection of pruning residues. The grapevine residues free ofimpurities that were collected during this study have typical values of copper in pruning wood, varying from 8.5 mg kg-1 when treated with low Cu product, to 19.2 mg kg-1 when treated with high Cu product. It was observed that contaminations during pruning with soil could increase the amount of copper in the residues. More in detail, every percentage point of soil that winds up on pruning residues involves an increase of 1 mg of Cu every kg of biomass. For this reason, we recommend the use of appropriate systems for the harvest of grapevine residues, particularly mechanical systems that avoid soil lifting. Moreover, we suggest the use of pruning residues preferably in large-scale power plants with appropriate emission filters instead of small-scale domestic boilers. [ABSTRACT FROM AUTHOR]

The high heterogeneity of some residual biomasses makes rather difficult their energy use. Their standardisation is going to be a key aspect to get good quality biofuels from those residues. Torrefaction is an interesting process to improve the physical and chemical properties of lignocellulosic biomasses and to achieve standardisation. In the present study torrefaction has been employed on residues and by-products deriving from sunflower production chain, in particular sunflower stalks, husks and oil press cake. The thermal behaviour of these materials has been studied at first by thermogravimetric analysis in order to identify torrefaction temperatures range. Afterwards, different residence time and torrefaction temperatures have been tested in a bench top torrefaction reactor. Analyses of raw and torrefied materials have been carried out to assess the influence of the treatment. As a consequence of torrefaction, the carbon and ash contents increase while the volatilisation range reduces making the material more stable and standardised. Mass yield, energy yield and energy densification reach values of about 60%, 80% and 1.33 for sunflower stalks and 64%, 85% and 1.33 for sunflower oil press cake respectively. As highlighted by the results, torrefaction is more interesting for sunflower stalks than oil cake and husks due to their different original characteristics. Untreated oil press cake and husks, in fact, already show a good high heating value and, for this reason, their torrefaction should be mild to avoid an excessive ash concentration. On the contrary, for sunflower stalks the treatment is more useful and could be more severe. [ABSTRACT FROM AUTHOR]

The aim of this work is to evaluate the sustainability, in terms of greenhouse gases emission saving, of a new potential bio-ethanol production chain in comparison with the most common ones. The innovation consists of producing bio-ethanol from different types of no-food grapes, while usually bio-ethanol is obtained from matrices taken away from crop for food destination: sugar cane, corn, wheat, sugar beet. In the past, breeding programs were conducted with the aim of improving grapevine characteristics, a large number of hybrid vine varieties were produced and are nowadays present in the Viticulture Research Centre (CRA-VIT) Germplasm Collection. Some of them are potentially interesting for bio-energy production because of their high production of sugar, good resistance to diseases, and ability to grow in marginal lands. Life cycle assessment (LCA) of grape ethanol energy chain was performed following two different methods: i) using the spreadsheet BioGrace, developed within the Intelligent Energy Europe program to support and to ease the Renewable Energy Directive 2009/28/EC implementation; ii) using a dedicated LCA software. Emissions were expressed in CO2 equivalent (CO2eq). These two tools gave very similar results. The overall emissions impact of ethanol production from grapes on average is about 33 g CO2eq MJ-1 of ethanol if prunings are used for steam production and 53 g CO2eq MJ-1 of ethanol if methane is used. The comparison with other bio-energy chains points out that the production of ethanol using grapes represents an intermediate situation in terms of general emissions among the different production chains. The results showed that the sustainability limits provided by the normative are respected to this day. On the contrary, from 2017 this production will be sustainable only if the transformation processes will be performed using renewable sources of energy. [ABSTRACT FROM AUTHOR]

The use of renewable energies as alternative to fossil fuels has value from different points of view and has effects at environmental, social and economic level. These aspects are often connected to each other and together define the overall sustainability of bioenergy. At European level, the Directive 2009/28/EC gives the basic criteria for the estimation of sustainability of biofuels and indicates a minimum threshold of 35% of greenhouse gas saving for a biofuel in order to be considered sustainable. The Directive gives the possibility to identify standard regional values for the cultivation steps that could be utilized for the certification. This paper aims to give a contribution to the definition of these values considering the RED methodology applied to the sunflower cropped in central Italy which is characterized by a hilly landscape and not-irrigated crops. To determine input and output of sunflower cultivation in the central Italy, the results of PROBIO project, carried out by the Authors, were used. The sustainability of biodiesel produced from sunflower grown in central Italy is variable and depends on the nitrogen input and seasonal climatic conditions that affect the yields. The greenhouse gases savings of the Italian chain is 40% in average, greater than the required 35% and would be possible to assign this value as standard to the biofuel chain biodiesel from sunflower cultivated in central Italy. Using an averaged regional standard value guards against the possibility of considering unsustainable harvesting in unfavourable years and seeing it overestimated in the favourable ones. [ABSTRACT FROM AUTHOR]