Search

The high-performance LiNi 0.5 Mn 1.5 O 4 has been prepared by an improved solid-state method, which is calcined in nitrogen at the first stage and in air at the second stage. The reaction process between nickel atoms and manganese atoms was changed by the improved solid-state method. The final product is a high purity cubic spinel structure (Fd3m) with high crystallinity, little impurities and excellent electrochemical performances. The EDX demonstrates that there is slightly lower nickel content and carbon content on the crystal surfaces. It shows a discharge capacity of 138 mAh/g at the first cycle and 133.9 mAh/g after 100 cycles at 0.1C rate. It also can deliver a discharge capacity of 111.3 mAh/g at 5C rate. The discharge capacity of the cathode at 55 °C is up to 124 mAh/g with capacity retention of 96.1% after 100 cycles. These results show that the improved solid-state method has potential application for the large-scale synthesis of LiNi 0.5 Mn 1.5 O 4 in high power Li-ion batteries. [ABSTRACT FROM AUTHOR]

LiNi 1/3 Co 1/3 Mn 1/3 O 2 is successfully coated with MnO 2 by a chemical deposition method. The X-ray diffraction (XRD), scanning electron microscope (SEM) and high resolution transmission electron microscope (HRTEM) results demonstrate that MnO 2 forms a thin layer on the surface of LiNi 1/3 Co 1/3 Mn 1/3 O 2 without destroying the crystal structure of the core material. Compared with pristine LiNi 1/3 Co 1/3 Mn 1/3 O 2 , the MnO 2 -coated sample shows enhanced electrochemical performance especially the rate capability. Even at a current density of 750 mA g −1 , the discharge capacity of MnO 2 -coated LiNi 1/3 Co 1/3 Mn 1/3 O 2 is 155.15 mAh g −1 , while that of the pristine electrode is only 132.84 mAh g −1 in the range of 2.5–4.5 V. The cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS) curves show that the MnO 2 coating layer reacts with Li + during cycling, which is responsible for the higher discharge capacity of MnO 2 -coated LiNi 1/3 Co 1/3 Mn 1/3 O 2 . Electrochemical impedance spectroscopy (EIS) results confirmed that the MnO 2 coating layer plays an important role in reducing the charge transfer resistance on the electrolyte–electrode interfaces. [ABSTRACT FROM AUTHOR]