Search

Morphology of transition metal oxide largely affects its electrochemical energy storage properties. This also applies to its composites. In this paper, NiFe 2 O 4 /Graphene nanosheets composites (NFO/GNSs) are successfully prepared by a facile hydrothermal method. NiFe 2 O 4 (NFO) in the sample exhibits a unique nanosheet morphology, vertically arranging on the graphene nanosheets (GNSs). Microscopically, NFO nanosheets interpenetrate on the surface of graphene to form a continuous network structure. The sample exhibits excellent specific capacitance and rate performance. It is worth mentioning that the specific capacitance increases to 140% after 5000 cycles, showing superior cycle stability. This may be due to the conductive network formed by NFO nanosheets and GNSs. Excellent electrochemical performance indicates excellent application prospects of materials in supercapacitor electrodes. Image 1 • Unique NiFe 2 O 4 nanosheets structure with graphene nanosheets was successfully prepared by a hydrothermal method. • NiFe 2 O 4 nanosheets/graphene performed a better specific capacitance, arriving at 464.15 F/g at current density of 1 A/g. • The network structure formed between NiFe 2 O 4 nanosheets and graphene nanosheets provides excellent cycle performance. [ABSTRACT FROM AUTHOR]

Transitional metal nitrides (TMNs) are regarded as comparatively promising electrode materials for supercapacitor due to the high electronic conductivity, good corrosion resistance and special electron structure. Herein, in this work a heterostructure Co 2 N-Ni 3 N nanosheets-nanowires arrays grown on Ni foam (NF) are designed and synthesized by a simple hydrothermal reaction and nitriding treatment. The prepared Co 2 N-Ni 3 N/NF nanoarrays has a high electrical conductivity, abundant surface active sites, charge transfer channels and the synergy effect between each component, which makes it exhibit outstanding electrochemical performance. Electrochemical test results revealed that the areal capacitance of Co 2 N-Ni 3 N/NF was 2.17 F cm−2 at 1 mA cm−2 using a three-electrode system in 1 M KOH. Meanwhile, when the current density increases to 20 mA cm−2, it can still retain 62.21% of the original capacitance, suggesting a good rate capability. In addition, in two-electrode test with Co 2 N-Ni 3 N/NF as the positive electrode and activated carbon as the negative electrode, a maximum energy density of 145.65 μWh cm−2 is shown when the power density is 0.75 mW cm−2. And it has 85.90% capacitance retention after 5000 cycles. [Display omitted] • Unique Co 2 N-Ni 3 N nanoarray heterostructure was successfully synthesized. • Co 2 N-Ni 3 N/NF achieves an areal capacitance 2.17 F cm-2 at current density of 1 mA cm-2. • The Co 2 N-Ni 3 N/NF // AC exhibits good electrochemical performance in two-electrode tests. [ABSTRACT FROM AUTHOR]