Search

The National Oceanic and Atmospheric Administration National Climatic Data Center has served as the archive of the Defense Meteorological Satellite Program Special Sensor Microwave Imager (SSM/I) data from the F-8, F-10, F-11, F-13, F-14, and F-15 platforms covering the period from July 1987 to the present. Passive microwave satellite measurements from SSM/I have been used to generate climate products in support of national and international programs. The SSM/I temperature data record (TDR) and sensor data record (SDR) datasets have been reprocessed and stored as network Common Data Form (netCDF) 3-hourly files. In addition to reformatting the data, a normalized anomaly (z score) for each footprint temperature value was calculated by subtracting each radiance value with the corresponding monthly 1[degrees] grid climatological mean and dividing it by the associated climatological standard deviation. Threshold checks were also used to detect radiance, temporal, and geolocation values that were outside the expected ranges. The application of z scores and threshold parameters in the form of embedded quality flags has improved the fidelity of the SSM/I TDR/SDR period of record for climatological applications. This effort has helped to preserve and increase the data maturity level of the longest satellite passive microwave period of record while completing a key first step before developing a homogenized and intercalibrated SSM/I climate data record in the near future. DOI: 10.1175/2009JAMC2314.1

In light of the upcoming launch of the Global Precipitation Measurement (GPM) mission, a parametric retrieval algorithm of the nonraining parameters over the global oceans is developed with the ability to accommodate all currently existing and planned spaceborne microwave window channel sensors and imagers. The physical retrieval is developed using all available sensor channels in a full optimal estimation inversion. This framework requires that retrieved parameters be physically consistent with all observed satellite radiances regardless of the sensor being used. The retrieval algorithm has been successfully applied to the Advanced Microwave Scanning Radiometer-Earth Observing System (AMSR-E), the Special Sensor Microwave Imager (SSM/I), and the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) with geophysical parameter retrieval results comparable to independent studies using sensor-optimized algorithms. The optimal estimation diagnostics characterize the retrieval further, providing errors associated with each of the retrieved parameters, indicating whether the retrieved state is physically consistent with observed radiances, and yielding information on how well simulated radiances agree with observed radiances. This allows for the quantitative assessment of potential calibration issues in either the model or sensor. In addition, there is an expected, consistent response of these diagnostics based on the scene being observed, such as in the case of a raining scene, allowing for the emergence of a rainfall detection scheme providing a new capability in rainfall identification for use in passive microwave rainfall and cloud property retrievals.

A revised Bayesian algorithm for estimating surface rain rate, convective rain proportion, and latent heating profiles from satellite-borne passive microwave radiometer observations over ocean backgrounds is described. The algorithm searches a large database of cloud-radiative model simulations to find cloud profiles that are radiatively consistent with a given set of microwave radiance measurements. The properties of these radiatively consistent profiles are then composited to obtain best estimates of the observed properties. The revised algorithm is supported by an expanded and more physically consistent database of cloud-radiative model simulations. The algorithm also features a better quantification of the convective and nonconvective contributions to total rainfall. a new geographic database, and an improved representation of background radiances in rain--free regions. Bias and random error estimates are derived from applications of the algorithm to synthetic radiance data, based upon a subset of cloud--resolving model simulations, and from the Bayesian formulation itself. Synthetic rain--rate and latent heating estimates exhibit a trend of high (low) bias for low (high) retrieved values. The Bayesian estimates of random error are propagated to represent errors at coarser time and space resolutions, based upon applications of the algorithm to TRMM Microwave Imager (TMI) data. Errors in TMI instantaneous rain--rate estimates at 0.5 [degrees]--resolution range from approximately 50% at 1 mm [h.sup.-1] to 20% at 14 mm [h.sup.-1]. Errors in collocated spaceborne radar rain--rate estimates are roughly 50%-80% of the TMI errors at this resolution. The estimated algorithm random error in TMI rain rates at monthly, 2.5[degrees] resolution is relatively small (less than 0% at 5 mm [day.sup.-1]) in comparison with the random error resulting from infrequent satellite temporal sampling (8%-35% at the same rain rate). Percentage errors resulting from sampling decrease with increasing rain rate, and sampling errors in latent heating rates follow the same trend. Averaging over 3 months reduces sampling errors in rain rates to 6%-15% at 5 mm [day.sup.-1], with proportionate reductions in latent heating sampling errors.

Rainfall rate estimates from spaceborne microwave radiometers are generally accepted as reliable by a majority of the atmospheric science community. One of the Tropical Rainfall Measuring Mission (TRMM) facility rain--rate algorithms is based upon passive microwave observations from the TRMM Microwave Imager (TMI). In Part I of this series, improvements of the TMI algorithm that are required to introduce latent heating as an additional algorithm product are described. Here, estimates of surface rain rate, convective proportion, and latent heating are evaluated using independent ground--based estimates and satellite products. Instantaneous, 0.5[degrees]-resolution estimates of surface rain rate over ocean from the improved TMI algorithm are well correlated with independent radar estimates (r~0.88 over the Tropics), but bias reduction is the most significant improvement over earlier algorithms. The bias reduction is attributed to the greater breadth of cloud--resolving model simulations that support the improved algorithm and the more consistent and specific convective/stratiform rain separation method utilized. The bias of monthly 2.5[degrees]-resolution estimates is similarly reduced, with comparable correlations to radar estimates. Although the amount of independent latent heating data is limited, TMI-estimated latent heating profiles compare favorably with instantaneous estimates based upon dual-Doppler radar observations, and time series of surface rain-rate and heating profiles are generally consistent with those derived from rawinsonde analyses. Still, some biases in profile shape are evident, and these may be resolved with (a) additional contextual information brought to the estimation problem and/or (b) physically consistent and representative databases supporting the algorithm. A model of the random error in instantaneous 0.5[degrees]-resolution rain-rate estimates appears to be consistent with the levels of error determined from TMI comparisons with collocated radar. Error model modifications for nonraining situations will be required, however. Sampling error represents only a portion of the total error in monthly 2.5[degrees]-resolution TMI estimates; the remaining error is attributed to random and systematic algorithm errors arising from the physical inconsistency and/or nonrepresentativeness of cloud-resolving-model-simulated profiles that support the algorithm.

This study focuses on improving the retrieval of rain from measured microwave brightness temperatures and the capability of the retrieved field to represent the mesoscale structure of a small intense hurricane. For this study, a database is constructed from collocated Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and the TRMM Microwave Imager (TMI) data resulting in about 50 000 brightness temperature vectors associated with their corresponding rain-rate profiles. The database is then divided in two: a retrieval database of about 35 000 rain profiles and a test database of about 25 000 rain profiles. Although in principle this approach is used to build a database over both land and ocean, the results presented here are only given for ocean surfaces, for which the conditions for the retrieval are optimal. An algorithm is built using the retrieval database. This algorithm is then used on the test database, and results show that the error can be constrained to reasonable levels for most of the observed rain ranges. The relative error is nonetheless sensitive to the rain rate, with maximum errors at the low and high ends of the rain intensities (+60% and--30%, respectively) and a minimum error between 1 and 7 mm [h.sup.-1]. The retrieval method is optimized to exhibit a low total bias for climatological purposes and thus shows a high standard deviation on point-to-point comparisons. The algorithm is applied to the case of Hurricane Bret (1999). The retrieved rain field is analyzed in terms of structure and intensity and is then compared with the TRMM PR original rain field. The results show that the mesoscale structures are indeed well reproduced even if the retrieved rain misses the highest peaks of precipitation. Nevertheless, the mesoscale asymmetries are well reproduced and the maximum rain is found in the correct quadrant. Once again, the total bias is low, which allows for future calculation of the heat sources/sinks associated with precipitation production and evaporation.

Intercomparisons of satellite rainfall products have historically focused on the issue of global mean biases. Regional and temporal variations in these biases, however, are equally important for many climate applications. This has led to a critical examination of rainfall estimates from the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and precipitation radar (PR). Because of the time-dependent nature of these biases, it is not possible to apply corrections based on regionally defined characteristics. Instead, this paper seeks to relate PR--TMI differences to physical variables that can lead to a better understanding of the mechanisms responsible for the observed differences. To simplify the analysis, issues related to differences in rainfall detection and intensity are investigated separately. For clouds identified as raining by both sensors, differences in rainfall intensity are found to be highly correlated with column water vapor. Adjusting either TMI or PR rain rates based on this simple relationship, which is relatively invariant over both seasonal and interannual time scales, results in a 65%--75% reduction in the rms difference between seasonally averaged climate rainfall estimates. Differences in rainfall detection are most prominent along the midlatitude storm tracks, where widespread, isolated convection trailing frontal systems is often detected only by the higher-resolution PR. Conversely, over the East China Sea clouds below the ~18-dBZ PR rainfall detection threshold are frequently identified as raining by the TMI. Calculations based on in situ aerosol data collected south of Japan support a hypothesis that high concentrations of sulfate aerosols may contribute to abnormally high liquid water contents within nonprecipitating clouds in this region.