Search

For a small antenna placed on a metamaterial ground plane vertically or horizontally, we analyzed the conditions under which the antenna emissions are highly directional. We found through finite-difference time-domain (FDTD) simulations that a previously discovered directional emission phenomenon can be explained by our theory for the horizontal antenna case. For the vertical antenna case, we employed FDTD simulations to design a realistic metamaterial ground plane with desired reflection phase properties, and performed microwave experiments to verify its ability to support directional emissions. [ABSTRACT FROM AUTHOR]

Surface plasmon polaritons (SPPs) propagating along a perfectly electric conducting film with an array of cut-through slits are studied analytically, and both the symmetric and asymmetric dielectric environments of the film are considered. Such a film structure, whether its substrate and superstrate are the same or different, may support a series of SPP modes, whose dispersion relations can be tailored by the film geometry. There exists a fundamental mode without any cutoff in the symmetric film structure, whereas all modes in the asymmetric structure have cutoffs, meaning that even the lowest-order mode can only exist when the film thickness is larger than a certain value. Moreover, for both types of symmetric and asymmetric film structures, the SPP bands do not overlap each other in the frequency domain, so the single-mode propagation is available for each mode. The fields of SPP modes are often highly confined to the structured film when the frequency approaches the asymptotic frequency. [ABSTRACT FROM AUTHOR]

We apply coordinate transformations in the design of waveguides with bent geometry to reduce reflection at the incident port. It was found that in the case of metallic waveguides, by applying the transformation to the medium inside a right-angle bent waveguide, low reflection can be obtained. For the case of dielectric waveguides, this can also be done by applying the same transformation to the bent region containing both the dielectric core and its claddings. Our proposed technique provides an alternative method for designing bent waveguides with low insertion loss. [ABSTRACT FROM AUTHOR]