Search

Monoblock ceramic cups are designed to accommodate large-diameter femoral heads. This has the potential to offer the advantages of an increased range of motion and enhanced joint stability. These features could benefit younger and high-demand patients in need of total hip arthroplasty. The aim of this study was to assess the survival rate and the reasons for revision of the DeltaMotion cup. Data from the AOANJRR were analyzed for all patients who had undergone a primary conventional THA performed between January 1, 2001 and December 31, 2021. Only prostheses with ceramic/ceramic, ceramic/XLPE, metal/XLPE, or CM/XLPE bearing surfaces were included. The primary outcome measure was the cumulative percent revision for all causes. Secondary outcome measures were revision for dislocation/instability, ceramic breakage, or noise. A subanalysis for cup size was also performed. There were 486,946 primary conventional THA procedures undertaken for any reason. Of these, 4,033 used the DeltaMotion cup and 482,913 were modular designs. The DeltaMotion cup had the lowest CPR for all diagnoses compared to the modular bearings at all time points, had a significantly lower revision rate for prosthesis dislocation and no revisions for squeaking compared to other modular bearings. There were 175 ceramic breakages recorded in the modular bearing group and 1 ceramic breakage in the DeltaMotion group. The DeltaMotion cup had a low rate of all-cause revision, and for dislocation, ceramic breakage, and noise. Although this cup is no longer manufactured, ongoing follow-up of newer monoblock ceramic cups will determine their suitability for younger and more active patients. [ABSTRACT FROM AUTHOR]

There is growing interest in the perioperative management of patients who have indications for hip and knee arthroplasty in the setting of modifiable risk factors such as morbid obesity, poorly controlled diabetes, and smoking. A recent survey of the American Association of Hip and Knee Surgeons (AAHKS) found that 95% of respondents address modifiable risk factors prior to surgery. The aim of this study was to poll Australian arthroplasty surgeons regarding their approach to patients who have modifiable risk factors. The survey tool used in the AAHKS study was adapted for use in the Australian context and distributed to the membership of the Arthroplasty Society of Australia via SurveyMonkey. There were 77 responses received, representing a response rate of 64%. The majority of respondents were experienced, high volume arthroplasty surgeons. Overall, 91% of respondents restricted access to arthroplasty for patients who have modifiable risk factors. There were 72% restricting access for excessive body mass index, 85% for poor diabetic control, and 46% for smoking. Most respondents made decisions based on personal experience or literature review rather than hospital or departmental pressures. While 49% of surgeons believed that current payment systems did not impair their ability to achieve good outcomes, 58% believed that certain arthroplasty patients would benefit from additional intervention, based on their socioeconomic status. Over 90% of surgeons who responded address modifiable risk factors prior to surgery. This finding aligns with the practice patterns of AAHKS members, despite differences in healthcare systems. [ABSTRACT FROM AUTHOR]

Background: Distal femoral replacement (DFR) is a potential treatment option following periprosthetic fracture (PPF) of a total knee arthroplasty (TKA). However, there is limited literature regarding implant survivorship and complication rates. The aim of this study was to examine patient demographics and trends in usage, implant survivorship and modes of failure, and patient mortality following DFR for PPF captured by a national joint replacement registry.Methods: A retrospective registry review was performed using data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR). In total, 306 DFR were performed for PPF of a known primary TKA. Eighty-five percent of patients were female, and the mean age was 76.4 years. Kaplan-Meier estimates of implant and patient survivorship were performed.Results: The number of DFR performed for PPF has doubled over the past five years. The cumulative percent second revision rate at six years was 12%. The most common indications for revision were infection (37%) and aseptic loosening (33%). Patient survivorship after DFR was 97% and 83% at five and ten years, respectively.Conclusion: A national registry review has identified the increasing prevalence of DFR for PPF after primary TKA and demonstrated implant survivorship of 88% at midterm follow-up. Surgeons may consider DFR as an acceptable and durable treatment option.Level Of Evidence: Level III - Case Series. [ABSTRACT FROM AUTHOR]

Background: Data assessing femoral stems may be influenced by grouping together matt and polished stems, despite their differing reported survivorship. The aim of this study is to assess the difference in revision rates between commonly used cemented and cementless stems when polished tapered stems are assessed independently of matt stems.Methods: Australian Orthopaedic Association National Joint Replacement Registry data from 1999 to 2019 were used to assess difference in revision rates between the 5 most commonly implanted femoral cemented and cementless stems for osteoarthritis. Cemented matt femoral stems, stems using line-to-line cementing techniques and procedures using non-cross-linked polyethylene, large head (>32 mm) metal-on-metal bearing surfaces or exchangeable necks were excluded. Cumulative percent revision was used to help compare survivorship between stems.Results: There were 201,889 total hip replacements meeting the inclusion criteria, of which 50.0% were cemented and 50.0% cementless. Cemented stems had a lower rate of revision at all time points compared to cementless stems. This was most significant during the first 2 weeks (hazard ratio 0.48, 95% confidence interval 0.40-0.58, P < .001) compared to 2 weeks postoperatively and onwards (hazard ratio 0.85, 95% confidence interval 0.81-0.90, P < .001). A subanalysis of head size, bearing type, and surgeon volume further supported the use of a cemented stem.Conclusion: Commonly used cemented polished tapered stems have a lower revision rate when compared to commonly used cementless prostheses, and are recommended in all age groups for both low-volume and high-volume surgeons especially when head size 32 mm or smaller is used. [ABSTRACT FROM AUTHOR]

Background: In order to reduce the incidence of total hip joint replacement revision for wear, multiple advanced materials and alloys targeting hip replacement tribology have been introduced. Ion implantation of chromium-cobalt heads is thought to reduce wear due to increased surface hardness and lower friction. These advances in technology result in additional manufacturing costs. However, it is unclear whether these attributes result in a decreased rate of revision for wear and when used with modern highly crosslinked polyethylene (XLPE). The aim of this study is to compare the survivorship of stainless steel and ion-implanted chromium-cobalt femoral heads in order to determine whether ion implantation has a lower risk of revision.Methods: Data from the Australian Orthopedic Association National Joint Replacement Registry included all stainless steel and low-friction ion-treated (LFIT) femoral heads used in conjunction with a primary Exeter/Trident hip replacement combination and XLPE liners performed for osteoarthritis. Kaplan-Meier estimates of survivorship were used to describe the time to first revision. Hazard ratios (HRs) from Cox proportional hazard models, with adjustment for age and gender, were used to compare revision rates between the 2 groups.Results: There were 40,468 total hip replacements that met the inclusion criteria. Stainless steel heads had a lower revision rate compared to LFIT chromium-cobalt heads (HR 0.87, 95% confidence interval 0.76-1.00, P = .048). The difference in the rate of revision was even greater when 32-mm heads were used (HR 0.72, 95% confidence interval 0.58-0.89, P = .002). There was no difference in revision for loosening between head alloys or when stratified by age.Conclusion: Given the increased costs associated with LFIT implants and the lower rate of revision for stainless steel heads, we recommend the use of a stainless steel heads when using an Exeter/Trident hybrid hip with an XLPE liner. [ABSTRACT FROM AUTHOR]

Background: Kinematic alignment (KA) in total knee arthroplasty (TKA) replicates individual knee joint line orientation and physiological soft tissue balance. There are limited data on the effect of KA on survivorship compared with other methods of implanting a TKA. The aim of this study was to compare the survivorship of the same design of TKA implanted with either patient-specific instrument (PSI) KA or with computer-assisted surgery and conventionally instrumented.Methods: We performed an observational study of data from 2 national joint registries on all patients who underwent a TKA with a Triathlon cruciate-retaining TKA (Stryker, Mahwah, NJ) from January 2011 to December 31, 2013. The outcomes of knees performed with unrestricted KA using patient-specific instrument were compared with computer-assisted surgery and conventionally instrumented Triathlon cruciate-retaining TKA. The principal outcome measure was time to first revision using Kaplan-Meier estimates of survivorship. Cox proportional hazard ratios, adjusted for age and gender, were used to compare the 2 groups.Results: There were 20,512 TKA procedures recorded, of which 416 were performed using KA-PSI. The KA-PSI group was younger (66.8 ± 8.2 vs 68.3 ± 9.2, P = .001), with an identical gender distribution. The cumulative revision rate at 7 years was 3.1% for the KA-PSI Triathlon cohort and 3.0% for the other Triathlon TKA cohort (P = .89). The most common reasons for revision in the KA-PSI group were maltracking, patella erosion, and arthrofibrosis.Conclusion: Kinematically aligned Triathlon TKA using PSI has similar revision rate as all other Triathlon TKA. [ABSTRACT FROM AUTHOR]

Background: Total hip arthroplasty (THA) is an effective procedure for relieving pain and restoring function in osteoarthritis. A significant proportion of patients have severe disease bilaterally. Consensus regarding safety and selection of patients for simultaneous bilateral THA or the optimal timing for staged THA has not been reached. The aim of this study is to compare rates, causes of revision, and 30-day mortality between simultaneous and staged bilateral THA using data from the Australian Orthopedic National Joint Replacement Registry.Methods: Data for 12,359 bilateral THA procedures were collected from September, 1999 to December, 2017. Rates and causes of revision and 30-day mortality were obtained for simultaneous bilateral and staged procedures with intervals of 1 day-6 weeks, 6 weeks-3 months, and 3 months-6 months. Yearly cumulative percent revision or cumulative percent survival with 95% confidence intervals calculated by the Kaplan-Meier method, and adjusted hazard ratios were used for comparisons.Results: Thirty-day mortality is lower in patients who have bilateral procedures within 6 months, regardless of timing, than those who have unilateral procedures (0.06% vs 0.18%). Staged bilateral THA had a significantly lower mortality than simultaneous bilateral THA (odds ratio 0.175, 95% confidence interval = 0.04-0.78, P = .022). When separate time intervals were compared, no significant differences were seen. Bilateral 6 week-3 months has a higher rate of revision from 1.5 years-2years compared with same day bilaterals (hazard ratio = 2.39, 95% confidence interval = 1.12, 5.09, P = .024). There were no other significant differences in the rate of revision between groups. The most common reasons for revision were fracture, loosening, and infection. Simultaneous bilateral procedures have a significantly higher rate of revision for fracture compared with staging 3-6 months (hazard ratio = 1.96 [1.27, 3.03], P = .002).Conclusion: This study demonstrates that bilateral THA has a low mortality rate regardless of time interval between procedures. Simultaneous and staged bilateral THA have similar rates of revision. [ABSTRACT FROM AUTHOR]

Background: Outcomes following 1-surgeon single-anesthetic sequential bilateral total knee arthroplasty (seq-BTKA) compared to 2-surgeon single-anesthetic simultaneous bilateral total knee arthroplasty (sim-BTKA) are largely unknown. The current study compared revision rates and all-cause mortality following seq-BTKA vs sim-BTKA using data from the Australian Orthopedic Association National Joint Replacement Registry.Methods: Seq-BTKA and sim-BTKA procedures recorded within the registry between September 1, 1999 and December 31, 2018 were analyzed for subsequent revision and patient mortality. Cumulative percent revision and cumulative percent survival were determined using the Kaplan-Meier method. Revision and mortality rates for sim-BTKA and seq-BTKA were compared using Cox proportional hazards models, adjusting for age and gender.Results: Included in the analysis were 27,480 seq-BTKAs and 471 sim-BTKAs. There was no difference in the cumulative percent revision between the 2 groups (hazard ratio 1.23, 95% confidence interval 0.82-1.85). Cumulative percent patient survival was not significantly different between the 2 groups (hazard ratio 1.20, 95% confidence interval 0.93-1.54).Conclusion: Revision rates and mortality were similar for seq-BTKA and sim-BTKA. Investigation of additional outcomes such as complications not requiring revision, pain, function, and cost is required to comprehensively understand the relative merits of each procedure. [ABSTRACT FROM AUTHOR]

Background: The cementless Corail is one of the most commonly used stems in total hip arthroplasty (THA). The aim of this study was to investigate whether there was a difference in revision rate for smaller stems.Methods: All primary THA procedures recorded by the Australian Joint Replacement Registry from September 1999 to December 2017 performed for osteoarthritis using the Corail stem, a cementless acetabular cup, modern bearing surfaces (ceramic/ceramic, ceramic/cross-linked polyethylene, and metal/cross-linked polyethylene), and 28 mm, 32 mm, and 36 mm head sizes were included. The primary outcome measure was femoral component revision. Data were analyzed and adjusted for age, gender, and head size. Further analysis investigated the effects of surgical approach.Results: There was 41,265 primary THAs recorded. The cumulative percent revision (CPR) at 13 years was 7.7% (5.5, 10.7) for stem sizes 8 and 9 and 3.0% (2.4, 3.8) for sizes 10-20 (P < .001). When adjusted for age and gender, the sizes 8 and 9 collared (hazard ratio [HR]: 6.22 [3.84-10.06], P < .001) and collarless (HR: 3.28 [2.41-4.45], P < .001) had a higher CPR than the collared and collarless size 10-20. The size 8 and 9 stems performed with an anterior approach had the highest CPR (HR: 14.44 [6.21-33.56], P < .001). The main reason for revision of size 8 and 9 femoral stems was loosening (65.2%, compared to 31.5% for 10-20 femoral stems).Conclusions: Smaller Corail stems have 4 times the rate of revision compared with the larger femoral sizes with loosening being the most common diagnosis. This is most evident when using an anterior approach. [ABSTRACT FROM AUTHOR]

Background: Total hip and knee arthroplasties (THKAs) are successful procedures in managing end-stage arthritis when nonoperative treatments fail. The immediate postoperative period is an important time for the body to recuperate and rehabilitate. Studies have shown that early intensive rehabilitation can enhance recovery. Rehabilitation can be provided as inpatient rehabilitation (IR) or discharge with home rehabilitation. These options have been studied, but literature on the efficacy and safety of IR compared to home discharge is scarce, and evidence is not well established. This meta-analysis aims to compare the efficacy and safety of IR to home discharge with rehabilitation after THKA.Methods: A multidatabase search was performed according to PRISMA guidelines. Data from studies assessing the efficacy and safety of IR and home as discharge destinations after THKA were extracted and analyzed.Results: Fifteen studies were included, consisting of 37,411 IR patients and 172,219 home discharge patients. These studies had heterogeneous reporting methods, with some conflicting results. There was no clinically significant difference in clinical outcomes between the groups. Readmission was nearly 5 times (odds ratio = 4.87, 95% confidence interval = 3.24-7.33, P < .001) and periprosthetic complications nearly 3 times (odds ratio = 2.82, 95% confidence interval: 1.54-5.24, P < .001) higher in IR patients than those discharged home after THKA.Conclusion: Although IR is associated with higher risks of complications and readmissions, this may be because of patient selection bias in the clinical setting. Following THKA, it is safe to discharge patients to home with rehabilitation whenever possible.Evidence Level: Level II, Meta-analysis of heterogeneous studies. [ABSTRACT FROM AUTHOR]

Background: The declining popularity of cemented acetabular components is incongruous, given the published results of prostheses implanted using contemporary techniques. The outcome of arthroplasty has previously been demonstrated to correlate with surgeon experience and volume of practice. We aim to explore if surgeon volume alters outcomes of cemented acetabular components based on survivorship data from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR).Methods: An observational study was undertaken using a cohort of 22,956 patients with a primary diagnosis of osteoarthritis in the period 2003-2016 in whom cemented acetabular components were implanted. The cohort was stratified by age (greater than or less than 65 years) and annualized surgical volume of ≤10, >10-≤25, and >25 cases.Results: Stratified by age and volume, there was a protective benefit against revision conveyed at volume thresholds of 10 cases per annum and 25 cases per annum for patients ≥65 years of age and <65 years of age, respectively.Conclusion: Cemented total hip arthroplasty has excellent survivorship out to 15 years based on AOANJRR data. This survivorship is further improved if surgeons perform a higher volume of cases, with >25 cases conferring the greatest benefit. The AOANJRR data set is used to define best practice; surgeons who choose to utilize cemented acetabular fixation should be encouraged to perform this technique in adequate volumes to minimize revision risk and ensure the preservation of this important surgical skill set. [ABSTRACT FROM AUTHOR]

Background: Total knee arthroplasty (TKA) is an effective procedure for relieving pain and restoring function in osteoarthritis, with a significant proportion of patients having severe disease bilaterally. However, although there are differences in patient selection criteria for bilateral procedures, there is no consensus regarding the optimal timing for bilateral TKA. The aim of this study was to compare rates and causes of revision and 30-day mortality between simultaneous and staged bilateral TKA using data from the Australian Orthopaedic Association National Joint Replacement Registry.Methods: Data for over 36,000 bilateral TKAs were collected from September 1999 to December 2015. Rates and causes of revision and 30-day mortality rates were obtained for simultaneous bilateral and staged procedures with intervals of 1 day-6 weeks, 6 weeks-3 months, and 3-6 months. Yearly cumulative percent revision or cumulative percent survival with 95% confidence intervals calculated using the Kaplan-Meier method and adjusted hazard ratios were used for comparisons.Results: There was no significant difference between revision rates or reasons for revision between staged bilateral and simultaneous TKA (hazard ratio 1.09 [95% confidence interval {CI} 0.85-1.40; P = .511] for 1 day-6 weeks, 0.93 [95% CI 0.77-1.14; P = .494] for 6 weeks-3 months, and 1.10 [95% CI 0.98-1.23; P = .115] for 3-6 months). The most common reasons for revision were loosening/lysis and infection. The 30-day mortality rates were lower in the 6 weeks-3 months group than simultaneous bilaterals (P = .007).Conclusion: This study demonstrates that simultaneous and staged bilateral TKA have similar rates of revision over the medium term but that 30-day mortality is reduced in the 6 weeks-3 months group. [ABSTRACT FROM AUTHOR]

Background: Matt and polished femoral stems have been historically grouped together in registry assessment of the outcome of cemented femoral stems in total hip arthroplasty. This is despite differences in the mode of fixation and biomechanics of loading. The aims of this study are to compare the survivorship of polished tapered stems with matt finished cemented stems.Methods: Data on primary total hip arthroplasty undertaken for a diagnosis of osteoarthritis from September 1999 to December 2014 were included from a National Joint Registry. Revision rates of the 2 different types of femoral components were compared.Results: There were 96,315 cemented femoral stems included, of which 82,972 were polished tapered and 13,343 matt finish. The cumulative percent revision at 14 years of polished stems was 3.6% (3.0-4.2) compared to 4.9% (4.1-5.7) for matt finish stems. Polished tapered stems had a significantly lower revision rate of femoral revision (hazard ratio 0.56, P < .001). This difference is evident in patients aged <75, and becomes apparent in the mid-term and continues to increase with time. Aseptic loosening accounts for 75% of revisions of matt finish stems compared to 20% for polished tapered stems.Conclusion: Although both polished and matt finish stems have excellent early to mid-term results, the long-term survivorship of polished stems is significantly better, with aseptic loosening becoming an issue with matt finish stems. In the future reports of cement fixation for femoral stems may benefit from separate analysis of polished and matt finish. [ABSTRACT FROM AUTHOR]

Background: Constrained acetabular components have a mechanism to lock in the femoral head. They have been developed to control postoperative dislocation, particularly in revision total hip arthroplasty (THA). Although these components may reduce dislocation, there are durability concerns: with reports of locking mechanism failures and loosening. We wanted to determine the outcome of constrained components in controlling dislocation, and if these components had a higher rate of second revision when compared with standard nonconstrained components.Methods: Revision THA procedures from the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) with a recorded primary procedure and initial diagnosis of osteoarthritis were used to compare constrained and standard nonconstrained components. Kaplan-Meier estimates of survivorship were calculated, and hazard ratios using Cox proportional hazard models were used to compare groups.Results: There were 9509 THA first-revision procedures and 700 constrained components. Constrained components had a significantly higher revision rate after 3 months when large-head metal-on-metal components were included (hazard ratio = 1.37; P = .005). When large-head metal-on-metal components were excluded, there was no difference in the rate of second revision between the 2 groups. When the analysis was limited to first revision for dislocation, constrained components had a higher second revision rate for further dislocation after 9 months.Conclusion: Constrained acetabular components had similar second-revision rates when compared with standard nonconstrained components, both for all first-revision reasons and when used to treat dislocation. Although possibly used for the more difficult unstable hips, constrained components had a higher rate of second revision for further dislocation. [ABSTRACT FROM AUTHOR]

Background: Dislocation is a leading cause of revision after primary total hip arthroplasty (THA). Although more common in the first few years after the procedure, dislocation can occur at any time. This study investigated the difference in late dislocation in ceramic-on-ceramic (CoC) bearings compared with metal-on-polyethylene and ceramic-on-polyethylene bearings in THA.Methods: Data were used from the Australian Orthopaedic Association National Joint Replacement Registry, and the cumulative percent revision for dislocation was estimated using the Kaplan-Meier method for the different bearing surfaces. There were 192,275 THAs included in the study with 101,915 metal-on-cross-linked polyethylene (MoXLPE), 30,256 ceramic-on-cross-linked polyethylene (CoXLPE), and 60,104 CoC.Results: The cumulative percent revision for dislocation at 13 years for MoXLPE, CoXLPE, and CoC groups was 1.2 (95% confidence interval [CI], 1.1-1.3), 1.0 (95% CI, 0.7-1.4), and 0.9 (95% CI, 0.8-1.1), respectively. There was an increased risk of revision for dislocation for MoXLPE compared with CoXLPE and CoC. When stratified for head size, there was no difference in the risk of revision for dislocation between MoXLPE, CoXLPE, and CoC in the 28- and 32-mm head sizes. With a head size of 36 mm, MoXLPE had a higher rate of dislocation compared with other materials.Conclusion: Bearing surface has little impact on revision for dislocation. [ABSTRACT FROM AUTHOR]

Background: Many exchangeable neck hip systems have been withdrawn because of fretting corrosion at the neck/stem coupling.Method: Our prospective randomized study evaluating stem stability (Roentgen stereophotogrammetric analysis, dual-energy x-ray absorptiometry) and clinical outcomes between the K2/Apex hip systems was ceased early because of a withdrawal of the stems which had an unfavorably high early revision rate reported in the Australian Orthopaedic Association National Joint Registry (9.3% at 3 years).Results: At 2 years, there are no clinical differences between the stems. Roentgen stereophotogrammetric analysis has identified a high proportion of potentially concerning subsidence and retroversion in both groups, more marked in the K2 stem, although mostly in asymptomatic patients. Dual-energy x-ray absorptiometry has shown similar bone density around the stems. Retrieval analysis of 3 study patients showed fretting corrosion of the antirotation pin and aseptic lymphocyte-dominated vasculitis-associated lesion, with no relationship to bearing type or size. Analysis of 7 further nonstudy K2/Apex stems confirmed similar corrosion.Conclusion: This study shows potentially concerning subsidence of both stems and is the first to describe corrosion at the neck-stem interface and a relationship to metal-related pathology. [ABSTRACT FROM AUTHOR]

Total knee arthroplasty (TKA) systems permit a degree of femoro-tibial component size mismatch. The effect of mismatched components on revision rates has not been evaluated in a large study. We reviewed 21,906 fixed-bearing PFC Sigma primary TKAs using the Australian Orthopaedic Association National Joint Replacement Registry, dividing patients into three groups: no femoro-tibial size mismatch, tibial component size > femoral component size, and femoral component > tibial component. Revision rates were higher when the femoral size was greater than the tibia, compared to both equal size (HR = 1.20 (1.00, 1.45), P = 0.047) and to tibial size greater than femoral (HR = 1.60 (1.08, 2.37), P = 0.019). Potential mechanisms to explain these findings include edge loading of polyethylene and increased tibial component stresses. [ABSTRACT FROM AUTHOR]

Abstract: The use of large diameter metal bearing total hip arthroplasty (THA) and hip resurfacing arthroplasty (HRA) increased in popularity in the last decade. More recent literature has highlighted the effect of head size in patient outcomes. Data was obtained from the Australian Orthopaedic Association National Joint Replacement Registry (AOA-NJRR) to evaluate the Birmingham (MoM) bearing surface when used with THA and HRA. There is no difference in the overall rate of revision between the THA and HRA but head size has a significant effect on revision rate. The data show that small diameter metal bearings in HRA (below 50mm) have a higher rate of revision than large diameter metal bearings in HRA (equal to and above 50mm) (P <.001). Conversely the large diameter metal bearings in THA have a higher rate of revision than the small diameter metal bearings in THA (P =.027). The revision rate for large diameter HRA compared to small diameter THA is not significantly different P =.670. We recommend caution when choosing either a large diameter (≥50mm) metal on metal THA or small diameter (<50mm) HRA. [Copyright &y& Elsevier]

A consecutive series of 40 periprosthetic femoral fractures, treated with revision hip surgery using the Oxford trimodular femoral stem, were retrospectively studied, with an average follow-up of 7.9 years. Fractures were classified according to the Vancouver classification. There were 5 type B1 fractures, 28 type B2, and 7 type C. Radiographic union was achieved in 38 (95%) hips. The mean time to fracture union was 3.5 months. The prosthesis survival at 5 years was 95% (confidence interval, 88%-100%). Clinical results were good with a mean Oxford hip score of 30 (hip score maximum, 48). Complications included 1 nonunion, 1 infection, 1 dislocation, and 2 aseptic loosening. The Oxford trimodular femoral component is a safe and reliable prosthesis for the treatment of periprosthetic femoral fractures with satisfactory medium-term results. [ABSTRACT FROM AUTHOR]