Search

Extensive evaluations have been performed on the dual-frequency classification module in the Global Precipitation Mission (GPM) Dual-Frequency Precipitation Radar (DPR) level-2 algorithm. Both rain type classification and melting-layer detection continue to show promising results in the validations. Surface snowfall identification is a feature newly added in the classification module to the recently released version to provide a surface snowfall flag for each qualified vertical profile. This algorithm is developed upon vertical features of Ku- and Ka-band reflectivity and dual-frequency ratio from DPR. In this paper, we validate this surface snowfall identification algorithm with ground radars including NEXRAD, NASA Polarimetric Radar (NPOL), and CSU–CHILL radar during concurrent precipitation events and GPM validation campaign Olympic Mountain Experiment (OLYMPEX). Other ground truth such as Precipitation Imaging Package (PIP) and ground report is also included in the validation. Based on 16 validation cases in the years 2014–18, the average match ratio between surface snowfall flag from space radar and ground radar is around 87.8%. Promising agreements are achieved with different validation sources. Algorithm limitation and potential improvement are discussed. [ABSTRACT FROM AUTHOR]

A new passive microwave rainfall retrieval algorithm for the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) that relies on an a priori database derived from matchups between TMI brightness temperatures and precipitation radar (PR)-derived surface rain rates has been developed. In addition to implementing a fairly conventional Bayesian approach to precipitation estimation, it exploits a dimensional reduction technique designed to increase the effective sample density in the database and also to improve the detectability of precipitation over problem surface types. The details of the algorithm itself are described in a companion paper. In this paper, the algorithm is validated against independent PR-TMI matchups from calendar year 2002. The validation results are benchmarked against results obtained for the same scenes from the current standard (version 7) 2A12 rainfall product for TRMM. Validation statistics considered include the biases, correlation coefficients, and root-mean-square (RMS) differences for annual precipitation totals on a 1° grid as well as two-threshold Heidke skill scores (HSS) for instantaneous (pixel level) retrievals, determined separately for each of seven surface classes, including ocean, coast, and five other basic land surface types as well as for cold (<275 K) and warm surface skin temperatures. Overall, the University of Wisconsin (UW) algorithm exhibits markedly reduced RMS error and bias in the annual total rainfall and markedly improved instantaneous skill at delineating light rain rates, especially over land and the coast. To ensure that the improved results were not due to both the training and validation data having been taken from the same calendar year, the validation of the UW algorithm is repeated using 2005 matchup data. [ABSTRACT FROM AUTHOR]

Coherent power is an alternative to the conventional noise-subtracted power technique for measuring weather radar signal power. The inherent noise-canceling feature of coherent power eliminates the need for estimating and subtracting the noise component, which is required when performing conventional signal power estimation at low signal-to-noise ratio. The coherent power technique is particularly useful when averaging a high number of samples to improve sensitivity to weak signals. In such cases, the signal power is small compared to the noise power and the required accuracy of the estimated noise power may be difficult to achieve. This paper compares conventional signal power estimation with the coherent power measurement technique by investigating bias, standard deviation, and probability of false alarm and detection rates as a function of signal-to-noise ratio and threshold level. This comparison is performed using analytical expressions, numerical simulations, and analysis of cloud and precipitation data collected with the airborne solid-state Ka-band precipitation radar (KPR) operated by the University of Wyoming. [ABSTRACT FROM AUTHOR]

This paper describes improvements to the Tropical Rainfall Measurement Mission (TRMM) Microwave Imager (TMI) land rainfall algorithm in version 7 (v7) of the TRMM data products. The correlations between rain rates and TMI 85-GHz brightness temperatures (Tb) for convective and stratiform rain are generated using 7 years of collocated TMI and TRMM precipitation radar (PR) data. The TMI algorithm for estimating the convective ratio of rainfall is also modified. This paper highlights both the improvements in the v7 algorithm and the continuing problems with the land rainfall retrievals. It is demonstrated that the proposed changes to the algorithm significantly lower the overestimation by TMI globally and over large sections of central Africa and South America. Also highlighted are the problems with the 2A12 land algorithm that have not been addressed in the version 7 algorithm, such as large regional and seasonal dependence of biases in the TMI rain estimates, and potential changes to the algorithm to resolve these problems are discussed. [ABSTRACT FROM AUTHOR]

Rain evaporation, while significantly contributing to moisture and heat cloud budgets, is a still poorly understood process with few measurements presently available. Multiwavelength lidars, widely employed in aerosols and clouds studies, can also provide useful information on the microphysical characteristics of light precipitation, for example, drizzle and virga. In this paper, lidar measurements of the median volume raindrop diameter and rain evaporation rate profiles are compared with a model analytical solution. The intercomparison reveals good agreement between the model and observations, with a correlation between the profiles up to 65% and a root-mean-square error up to 22% with a 5% bias. Larger discrepancies are due to radiosonde soundings different air masses and model assumptions no more valid along the profile as nonsteady atmosphere and/or appearance of collision-coalescence processes. Nevertheless, this study shares valuable information to better characterize the rain evaporation processes. [ABSTRACT FROM AUTHOR]

This paper presents a novel, simple method to correct reflectivity measurements of weather radars that operate in attenuation-influenced frequency bands using observations from less attenuated radar systems. In recent years radar systems operating in the X-band frequency range have been developed to provide precipitation fields for areas of special interest in high temporal (≤1 min) and spatial (≤250 m) resolution in complement to nationwide radar networks. However, X-band radars are highly influenced by attenuation. C- and S-band radars typically have coarser resolution (250 m-1 km and 5 min) but are less affected by attenuation. Correcting for attenuation effects in simple (non-Doppler) single-polarized X-band radars remains challenging and is often dependent on restriction parameters, for example, those derived from mountain returns. Therefore, these algorithms are applicable only in limited areas. The method proposed here uses measurements from C-band radars and hence can be applied in all regions covered by nationwide C- (or S-) band radar networks. First, a single scan of X-band radar measurements is used exemplary to identify advantages and disadvantages of the novel algorithm compared to a standard single radar algorithm. The performance of the correction algorithms in different types of precipitation is examined in nine case studies. The proposed method provides very promising results for each type of precipitation. Additionally, it is evaluated in a 5-month comparison with Micro Rain Radar (MRR) observations. The bias between uncorrected X-band radar and MRR data is nearly eliminated by the attenuation correction algorithm, and the RMSE is reduced by 20% while the correlation of ~0.9 between both systems remains nearly constant. [ABSTRACT FROM AUTHOR]

The rain/no-rain classification for the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) fails to detect rain over coasts, where the microwave footprint encompasses a mixture of radiometrically cold ocean and radiometrically warm land. A static land-ocean-coast mask is used to determine the surface type of each satellite footprint. The coast mask is conservatively wide to account for the largest footprints, preventing use of the more appropriate ocean or land algorithm for coastal regions. The purpose of this paper is to develop a classification whereby the smallest region possible is defined as coast. In this endeavor, two major improvements are applied to the land-ocean-coast classification. First, the surface classification based on microwave footprints of the high frequency actually used in rain detection is employed. Second, the footprint area of the surface classification is established using an effective field-of-view size and scan geometry of the TMI. These improvements are applied to the Global Satellite Mapping of Precipitation TMI algorithm. The classification result is validated using the TRMM precipitation radar. The validation shows that these improvements lead to better rain detection in the coastal region. [ABSTRACT FROM AUTHOR]

This paper demonstrates the impact of the enhancement in detectability by the dual-frequency precipitation radar (DPR) on board the Global Precipitation Measurement (GPM) core observatory. By setting two minimum detectable reflectivities-12 and 18 dB Z-artificially to 6 months of GPM DPR measurements, the precipitation occurrence and volume increase by ~21.1% and ~1.9%, respectively, between 40°S and 40°N. GPM DPR is found to be able to detect light precipitation, which mainly consists of two distinct types. One type is shallow precipitation, which is most significant for convective precipitation over eastern parts of subtropical oceans, where deep convection is typically suppressed. The other type is probably associated with lower parts of anvil clouds associated with organized precipitation systems. While these echoes have lower reflectivities than the official value of the minimum detectable reflectivity, they are found to mostly consist of true precipitation signals, suggesting that the official value may be too conservative for some sort of meteorological analyses. These results are expected to further the understanding of both global energy and water budgets and the diabatic heating distribution. [ABSTRACT FROM AUTHOR]

The Goddard profiling algorithm has evolved from a pseudoparametric algorithm used in the current TRMM operational product (GPROF 2010) to a fully parametric approach used operationally in the GPM era (GPROF 2014). The fully parametric approach uses a Bayesian inversion for all surface types. The algorithm thus abandons rainfall screening procedures and instead uses the full brightness temperature vector to obtain the most likely precipitation state. This paper offers a complete description of the GPROF 2010 and GPROF 2014 algorithms and assesses the sensitivity of the algorithm to assumptions related to channel uncertainty as well as ancillary data. Uncertainties in precipitation are generally less than 1%-2% for realistic assumptions in channel uncertainties. Consistency among different radiometers is extremely good over oceans. Consistency over land is also good if the diurnal cycle is accounted for by sampling GMI product only at the time of day that different sensors operate. While accounting for only a modest amount of the total precipitation, snow-covered surfaces exhibit differences of up to 25% between sensors traceable to the availability of high-frequency (166 and 183 GHz) channels. In general, comparisons against early versions of GPM's Ku-band radar precipitation estimates are fairly consistent but absolute differences will be more carefully evaluated once GPROF 2014 is upgraded to use the full GPM-combined radar-radiometer product for its a priori database. The combined algorithm represents a physically constructed database that is consistent with both the GPM radars and the GMI observations, and thus it is the ideal basis for a Bayesian approach that can be extended to an arbitrary passive microwave sensor. [ABSTRACT FROM AUTHOR]

A new approach to passive microwave retrievals of precipitation is described that relies on an objective dimensional reduction procedure to filter, normalize, and decorrelate geophysical background noise while retaining the majority of radiometric information concerning precipitation. The dimensional reduction also sharply increases the effective density of any a priori database used in a Bayesian retrieval scheme. The method is applied to passive microwave data from the Tropical Rainfall Measuring Mission (TRMM), reducing the original nine channels to three 'pseudochannels' that are relatively insensitive to most background variations occurring within each of seven surface classes (one ocean plus six land and coast) for which they are defined. These pseudochannels may be used in any retrieval algorithm, including the current standard Goddard profiling algorithm (GPROF), in place of the original channels. The same methods are also under development for the Global Precipitation Measurement (GPM) Core Observatory Microwave Imager (GMI). Starting with the pseudochannel definitions, a new Bayesian algorithm for retrieving the surface rain rate is described. The algorithm uses an a priori database populated with matchups between the TRMM precipitation radar (PR) and the TRMM Microwave Imager (TMI). The explicit goal of the algorithm is to retrieve the PR-derived best estimate of the surface rain rate in portions of the TMI swath not covered by the PR. A unique feature of the new algorithm is that it provides robust posterior Bayesian probabilities of pixel-averaged rain rate exceeding various thresholds. Validation and intercomparison of the new algorithm is the subject of a companion paper. [ABSTRACT FROM AUTHOR]

This paper presents new methods for rainfall estimation from X-band dual-polarization radar observations along with advanced techniques for quality control, hydrometeor classification, and estimation of specific differential phase. Data collected from the Hydrometeorology Testbed (HMT) in orographic terrain of California are used to demonstrate the methodology. The quality control and hydrometeor classification are specifically developed for X-band applications, which use a 'fuzzy logic' technique constructed from the magnitude of the copolar correlation coefficient and the texture of differential propagation phase. In addition, an improved specific differential phase retrieval and rainfall estimation method are also applied. The specific differential phase estimation is done for both the melting region and rain region, where it uses a conventional filtering method for the melting region and a self-consistency-based method that distributes the total differential phase consistent with the reflectivity factor for the rain region. Based on the specific differential phase, rainfall estimations were computed using data obtained from the NOAA polarimetric X-band radar for hydrometeorology (HYDROX) and evaluated using HMT rain gauge observations. The results show that the methodology works well at capturing the high-frequency rainfall variations for the events analyzed herein and can be useful for mountainous terrain applications. [ABSTRACT FROM AUTHOR]

The distribution of raindrop shapes is well known to be important in deriving retrieval algorithms for drop size distribution parameters (such as the mass-weighted mean diameter) and rain rate, as well as for attenuation correction using the differential propagation phase constraint. While past work has shown that in the vast majority of rain events the most 'probable' shapes conform to those arising primarily from the axisymmetric (2,0) oscillation mode, a more recent event analysis has shown that drop collisions can give rise to mixed-mode oscillations and that for high collision rate scenarios, a significant percentage of drops can become 'asymmetric' at any given instant. As a follow-up to such studies, this study involved performing scattering calculations for 3D-reconstructed shapes of asymmetric drops using the shape measurements from a 2D video disdrometer (2DVD) during the above-mentioned rain event. A recently developed technique is applied to facilitate the 3D reconstruction from the 2DVD camera data for these asymmetric drops. The reconstruction requires a specific technique to correct for the drop image distortions due to horizontal velocities. Scattering calculations for the reconstructed asymmetric drops have been performed using a higher-order method of moments solution to the electric and magnetic field surface integral equations. Results show that the C-band scattering amplitudes of asymmetric drops are markedly different from those of oblate spheroids. The intention for future studies is to automate the entire procedure so that more realistic simulations can be performed using the 2DVD-based data, particularly for cases where collision-induced drop oscillations give rise to considerable numbers of asymmetric drops. [ABSTRACT FROM AUTHOR]

This study demonstrates the capabilities of a three-dimensional radiative transfer model coupled to a polarized microwave surface emissivity model. Simulations are performed at 10, 19, and 37 GHz for TMI and WindSat using three-dimensional fields of rain, snow, and graupel derived from Tropical Rainfall Measuring Mission observations of moderate Tropical Storm Asma in conjunction with atmospheric profiles and surface fields from ECMWF. Simulations are well behaved and compare well with measured brightness temperatures. Comparisons are made between simulations with a wind-roughened surface and simulations assuming a specular surface. This theoretical study, which is supported with WindSat retrievals, shows the frequencies and conditions under which surface emissions may be detected in the presence of rain. [ABSTRACT FROM AUTHOR]

The Goddard profiling algorithm (GPROF) is an operational passive microwave retrieval that uses a Bayesian scheme to estimate rainfall. GPROF 2014 retrieves rainfall and hydrometeor vertical profile information based upon a database of profiles constructed to be simultaneously consistent with Tropical Rainfall Measuring Mission (TRMM) precipitation radar (PR) and TRMM Microwave Imager (TMI) observations. A small number of tropical cyclones are in the current database constructed from one year of TRMM data, resulting in the retrieval performing relatively poorly for these systems, particularly for the highest rain rates. To address this deficiency, a new database focusing specifically on hurricanes but consisting of 9 years of TRMM data is created. The new database and retrieval procedure for TMI and GMI is called Hurricane GPROF. An initial assessment of seven tropical cyclones shows that Hurricane GPROF provides a better estimate of hurricane rain rates than GPROF 2014. Hurricane GPROF rain-rate errors relative to the PR are reduced by 20% compared to GPROF, with improvements in the lowest and highest rain rates especially. Vertical profile retrievals for four hydrometeors are also enhanced, as error is reduced by 30% compared to the GPROF retrieval, relative to PR estimates. When compared to the full database of tropical cyclones, Hurricane GPROF improves the RMSE and MAE of rain-rate estimates over those from GPROF by about 22% and 27%, respectively. Similar improvements are also seen in the overall rain-rate bias for hurricanes in the database, which is reduced from 0.20 to −0.06 mm h−1. [ABSTRACT FROM AUTHOR]

A statistical method to reduce the sidelobe clutter of the Ku-band precipitation radar (KuPR) of the Dual-Frequency Precipitation Radar (DPR) on board the Global Precipitation Measurement (GPM ) Core Observatory is described and evaluated using DPR observations. The KuPR sidelobe clutter was much more severe than that of the Precipitation Radar on board the Tropical Rainfall Measuring Mission (TRMM), and it has caused the misidentification of precipitation. The statistical method to reduce sidelobe clutter was constructed by subtracting the estimated sidelobe power, based upon a multiple regression model with explanatory variables of the normalized radar cross section (NRCS) of surface, from the received power of the echo. The saturation of the NRCS at near-nadir angles, resulting from strong surface scattering, was considered in the calculation of the regression coefficients. The method was implemented in the KuPR algorithm and applied to KuPR-observed data. It was found that the received power from sidelobe clutter over the ocean was largely reduced by using the developed method, although some of the received power from the sidelobe clutter still remained. From the statistical results of the evaluations, it was shown that the number of KuPR precipitation events in the clutter region, after the method was applied, was comparable to that in the clutter-free region. This confirms the reasonable performance of the method in removing sidelobe clutter. For further improving the effectiveness of the method, it is necessary to improve the consideration of the NRCS saturation, which will be explored in future work. [ABSTRACT FROM AUTHOR]