Search

The aim of this case series was to evaluate the clinical outcome of preformed titanium foil (PTF) to perform guided bone regeneration (GBR) in posterior mandibular atrophies. Thirteen patients (4 male; 9 female; mean age 58.85±10.16 years), with class II division C atrophy, according to Misch, were selected to perform GBR by means of PTF, using a moldable allograft paste as graft material. The devices, made of a 0.2mm thick pure titanium foil, were pre-shaped using stereolithographic models obtained from CT-scan of the patients’ recipient sites. In the second stage, performed at 6.35±2.15 months, 23 cylindrical two-piece implants were placed and the devices removed. At four months, the implants were exposed and submitted to progressive prosthetic load for a span of 4 months. The cases were finalized by means of metal-ceramic cementable restorations. The post finalization follow-up was at 12 months. Survival rate (i.e. SVR) was 100% since no fixtures were lost. At the one-year follow up, the clinical appearance of the soft tissues was optimal and no pathological signs on probing were recorded. The success rate (i.e. SCR) was 82.6% and the average peri-implant bone reabsorption was 0.99±0.59 mm. The results suggest good potentialities of this method for bone volume augmentation in distal mandibular atrophies, allowing to maximize the outcome and simplifying the surgical phase.

The purpose of this prospective clinical study was to evaluate the survival rate (SVR - i.e. fixtures still in place at the end of the observation period) and success rate (SCR - i.e. bone resorption around implant neck) of two cylindrical implant systems. Both systems were equipped with a tapered connection, one requiring a bone-level (BL) placement, while the other a soft-tissue-level (STL) placement. In the period between January 1996 and October 2011, a total of 150 implants (76 in females and 74 in males, mean age 60±11 years) were inserted. The mean post-surgical follow-up was 84±47 months. Several parameters were evaluated as potential outcome conditioners: age, gender, diabetes, smoking, periodontitis, type of edentulism, replaced tooth, jaw location (i.e. maxilla or mandible), bone graft, immediate loading, post-extractive, type of prosthesis, implant diameter and length. An SPSS program was used for statistical analysis. Only two fixtures were lost, therefore SVR was 98.7%. SCR, expressed through the mean marginal bone loss, was 92%. The mean peri-implant bone loss was 0.121.47 mm for BL implants and 0.041.3 mm for STL implants. None of the studied variables had a statistical significant impact on SVR or SCR. Cylindrical implants are reliable for oral rehabilitation.

The aim of this study was to evaluate a sinus lift via crestal approach (SLVCA) case series, performed with rotary instruments and hydraulic pressure, analyzed under endoscopic control. Sixteen patients (11 female, 5 male, mean age 47.13±8.07 years) candidates for SLVCA were enrolled in this study. Twenty-two cylindrical two-piece implants were placed. After a suitable period of time needed for the consolidation of the graft (mean value 5.78±1.49 months), the bone augmentation was assessed by means of intraoral X-ray exams before the surgical procedure of re-entry. After a functional load with temporary acrylic fixed prosthesis, on Peek abutments, for a span of 4 months, the cases were finalized with cemented metal-ceramic prosthesis (10 single crowns, 6 bridges). The post finalization follow-up was at 12 months. During the perforation of the sinus floor via rotary instruments no perforations of the sinus membrane were observed either during the hydraulic detachment or simultaneous filling of the subantral space with the graft material. Survival rate was 94.5% since one fixture was lost, but immediately replaced with a new one. At the one-year follow-up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. The SLVCA performed with rotary instruments and hydraulic pressure is a reliable grafting procedure for oral rehabilitation of maxillary edentulous sites.

In the present paper the use of tapered-screw bone expanders (TSBEs) is proposed, in combination with the placement of tilted implants in close proximity to the anterior sinus wall, solving the problem of the reduced height of the alveolar bone in the sub-antral area. The Authors named the procedure: Tilted Implant Expansion Osteotomy (TIEO). Fifteen patients (10 females and 5 males, mean age 47.8±8.15 years) with distal edentulous maxillae were enrolled in this study. For each edentulous site 2 implants were placed, the anterior implant in the area of the most anterior missing tooth while, the posterior implant, immediately in front of the maxillary sinus, with an inclined position. Adopting the aforesaid procedure, 34 cylindrical two-piece implants were placed, 17 of which were placed in tilted position, in order to by-pass the maxillary sinus. After a healing period of 4-6 months, the second stage surgery was performed. The cases were finalized by metal-ceramic cementable restorations with a variable number of elements, from 2 to 4, without any cantilever element. The post finalization follow-up was at 12 months. Survival rate was 100% since no fixtures were lost. At the one-year follow-up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. TIEO is a promising surgical procedure for oral rehabilitation of maxillary edentulous sites and represents a therapeutic alternative to sinus lift techniques.

The purpose of this retrospective clinical study was to evaluate the survival rate (i.e. SVR – fixtures still in place at the end of the observation period) and success rate (i.e. SCR - bone resorption around implant neck) of an implant system characterized by cylindrical and tapered implants, both types of implant being equipped with a conical connection with an internal octagon (COC), both implant types having a 1.8 mm smooth neck, positioned above the bone crest level. A total of 65 subjects received 215 COCs between January 1996 and October 2011. All COCs were placed and restored by three experienced dental surgeons. The mean follow-up was 84±44 months. The patients involved in the study were both male (30) and female (35), of whom 30 were smokers (less than 20 cigarettes/day) and none was diabetic. The implants differed in terms of diameter and length, and were inserted both in the mandible (97) and in the maxilla (118). Sixty-seven implants were single tooth rehabilitations, and 148 prosthetic bridges. Fourteen had guided bone regeneration (GBR), and 10 were placed in post-extractive sites. Forty of the implants were provided with passing-screw abutments and 175 with full-screw abutments. The data were analyzed using descriptive statistics. None of the implants failed before prosthetic restoration, resulting in an SVR=100% after loading. The radiographic and clinical data revealed well-maintained, hard and soft tissue around the COCs, with an SCR=92.6%. Cox regression analyses did not detect any variables with statistical impact on the clinical outcome. In conclusion, Shiner XT implants are reliable tools for oral rehabilitation.

The purpose of this prospective clinical study was to evaluate the survival rate (SVR - i.e. fixtures still in place at the end of the observation period) and success rate (SCR - i.e. bone resorption around implant neck) of an implant system characterized by cylindrical and tapered implants, both provided with an internal hexagonal connection. In the period between January 1996 and October 2011, 52 implants with internal hexagonal connection were inserted in 21 females and 31 males, mean age 54±11 years. The mean post-surgical follow-up was 44.6±34.4 months. Several parameters were evaluated as potential outcome conditioners: age, gender, smoking, replaced tooth, periodontal disease, fixture shape (i.e. cylindrical or tapered), jaw location (i.e. maxilla or mandible), bone graft, immediate loading, post-extractive placement, type of prosthesis (i.e. single crown or bridge), edentulism, implant diameter and length. An SPSS statistical program was used and Cox regression analysis performed. SVR was 100% since no fixtures were lost. SCR, expressed through the mean marginal bone loss, was 77%. No significant differences were found, for most of the parameters analyzed, with the exception of prosthetic bridges, where implants supporting this type of rehabilitation showed a worse clinical outcome in comparison to single crown rehabilitations. Internal hexagonal connection is a reliable tool for oral rehabilitation.

Implant oral rehabilitation has become one of the most successful dentistry techniques over the last 30 years. However, peri-implantitis is the most important complication in implant dentistry. Peri-implantits can be caused by inadequate implant-abutment connections (IAC). The aim of our study is to evaluate the influence of “conical plus octagonal” (i.e. I-Fix connection) on implant survival and success rate. All the implants included in this study were of a completely new type (I-Fix implants and abutments by FMD Falappa Medical Devices S.p.A. Rome, Italy). Sixty-six implants were inserted in males and females. The implants were of different diameters and lengths, inserted both in the mandible and in the maxilla with immediate or delayed loading, with guided bone regeneration (GBR), and post-extractive surgery. All implants were provided with I-Fix connection, 64 abutments using passing screws and 2 using full screws. None of the 66 implants were lost (i.e. survival rate - SVR = 100%). Cox-regression analysis demonstrated that diabetes (p=0.0074), GBR (p=0.0115), maxilla (p=0.0117) and smoking (p=0.0194) have a statistical significant impact on clinical outcome (i.e. greater bone resorption around implant neck). Our data show that I-Fix connection did not influence SVR. This finding demonstrates that I-Fix design seemed to significantly affect the survival rate of the implants in a recent meta-analysis. In spite of the limits of our study, I-Fix connection has been demonstrated to be efficient in closing the gap between implant and abutment and maintaining a good connection over time.

The aim of this case report was to evaluate the potential of preformed titanium foil (PTF) as membrane, used together with a mouldable allograft paste, for guided bone regeneration in a case of severe mandibular posterior atrophy involving the alveolar nerve. In order to create a rigid barrier to the competitive growth of soft tissues and a stable volume for the colonization of the osteoprogenitor cells, a foil of pure titanium was pre-shaped by means of a stereolithographic model, obtained from a CT-scan of the patient. This procedure showed promising results, allowing to maximize the outcome and simplifying the surgical phase.

The aim of this article is to show a simple and predictable technique to enhance both the vestibular/buccal (V/B) gingival thickness (GT) and keratinized tissue width (KTW) improving the soft-tissue profile after flapless implant placement. The technique proposed was named Modified Connective Tissue Punch (MCTP). Fourteen patients (6 men and 8 women) aged between 35 and 69 years (mean value 48.07±13.023 years) were enrolled in this case series. Seventeen implant sites were submitted to flapless procedure. The connective punch (CP) was harvested with a motor-driven circular tissue punch and then a full-split dissection was executed, in order to create a deep pouch, beyond the mucogingival junction, on the V/B side. In this recipient site the CP was placed. The normal flapless surgical protocol was used; implants were inserted and covered with transgingival healing cap screws. GT and KTW were measured: both immediately before and after surgery; at the time of the prosthetic finalization (3-4months, respectively, for mandible and maxilla); 1 year post surgery follow-up. GT was measured at 1 mm, 2 mm and 5 mm on the V/B side, from the outline of the punch. Both KTW and GT at 1 and 2 mm can be effectively increased, while no significant effects for GT at 5 mm can be expected from this technique. Furthermore, the mean values of KTW and GT at 1 mm and 2 mm show significant increases at 3-4 months post-operative, while no further significant increments are shown at 1 year post-operative follow-up. The Authors recommend the use of the MCTP technique to reduce the number of aesthetic complications and soft tissue defects in flapless implant surgery. Longer follow-ups are needed to evaluate the stability of peri-implant tissues over time.