Search

Both mechanical load and elevated levels of proinflammatory cytokines have been associated with the risk for developing osteoarthritis (OA), yet the potential interaction of these mechanical and biological factors is not well understood. The purpose of this study was to evaluate the response of chondrocytes to the effects of dynamic unconfined compression, TNF-α, and the simultaneous effects of dynamic unconfined compression and TNF-α. The response to these three treatments was markedly different and, taken together, the response in the gene expression of chondrocytes to the different treatment conditions suggest a complex interaction between structure, biology, and mechanical loading.

Measures of mean cartilage thickness over predefined regions in the femoral plate using magnetic resonance imaging have provided important insights into the characteristics of knee osteoarthritis (OA), however, this quantification method suffers from the limited ability to detect OA-related differences between knees and loses potentially important information regarding spatial variations in cartilage thickness. The objectives of this study were to develop a new method for analyzing patterns of femoral cartilage thickness and to test the following hypotheses: (1) asymptomatic knees have similar thickness patterns, (2) thickness patterns differ with knee OA, and (3) thickness patterns are more sensitive than mean thicknesses to differences between OA conditions. Bi-orthogonal thickness patterns were extracted from thickness maps of segmented magnetic resonance images in the medial, lateral, and trochlea compartments. Fifty asymptomatic knees were used to develop the method and establish reference asymptomatic patterns. Another subgroup of 20 asymptomatic knees and three subgroups of 20 OA knees each with a Kellgren/Lawrence grade (KLG) of 1, 2, and 3, respectively, were selected for hypotheses testing. The thickness patterns were similar between asymptomatic knees (coefficient of multiple determination between 0.8 and 0.9). The thickness pattern alterations, i.e., the differences between the thickness patterns of an individual knee and reference asymptomatic thickness patterns, increased with increasing OA severity (Kendall correlation between 0.23 and 0.47) and KLG 2 and 3 knees had significantly larger thickness pattern alterations than asymptomatic knees in the three compartments. On average, the number of significant differences detected between the four subgroups was 4.5 times greater with thickness pattern alterations than mean thicknesses. The increase was particularly marked in the medial compartment, where the number of significant differences between subgroups was 10 times greater with thickness pattern alterations than mean thickness measurements. Asymptomatic knees had characteristic regional thickness patterns and these patterns were different in medial OA knees. Assessing the thickness patterns, which account for the spatial variations in cartilage thickness and capture both cartilage thinning and swelling, could enhance the capacity to detect OA-related differences between knees.

The dynamic movements associated with anterior cruciate ligament (ACL) injury during jump landing suggest that limb segment angular velocity can provide important information for understanding the conditions that lead to an injury. Angular velocity measures could provide a quick and simple method of assessing injury risk without the constraints of a laboratory. The objective of this study was to assess the inter-subject variations and the sensitivity of the thigh and shank segment angular velocity in order to determine if these measures could be used to characterize jump landing mechanisms. Additionally, this study tested the correlation between angular velocity and the knee abduction moment. Thirty-six healthy participants (18 male) performed drop jumps with bilateral and unilateral landing. Thigh and shank angular velocities were measured by a wearable inertial-based system, and external knee moments were measured using a marker-based system. Discrete parameters were extracted from the data and compared between systems. For both jumping tasks, the angular velocity curves were well defined movement patterns with high inter-subject similarity in the sagittal plane and moderate to good similarity in the coronal and transverse planes. The angular velocity parameters were also able to detect differences between the two jumping tasks that were consistent across subjects. Furthermore, the coronal angular velocities were significantly correlated with the knee abduction moment (R of 0.28-0.51), which is a strong indicator of ACL injury risk. This study suggested that the thigh and shank angular velocities, which describe the angular dynamics of the movement, should be considered in future studies about ACL injury mechanisms.

The purpose of this study was to determine the contribution of changes in amplitude and phasing of medio-lateral trunk sway to a change in the knee adduction moment when walking with increased medio-lateral trunk sway. Kinematic and kinetic data of walking trials with normal and with increased trunk sway were collected for 19 healthy volunteers using a standard motion analysis system. The relationship between the change in first peak knee adduction moment (ΔKAM) and change in trunk sway amplitude (ΔSA; difference between maximum contralateral trunk lean and maximum ipsilateral trunk lean) and phasing (SP; time of heel-strike relative to time of maximum contralateral and time of maximum ipsilateral trunk lean) was determined using nonlinear regression analysis. On average, subjects increased their SA by 9.7 ± 3.6 deg (P < 0.001) with an average SP of 98.8 ± 88.8 ms resulting in an average reduction in the first peak knee adduction moment of -55.2 ± 30.3% (P < 0.001). 64.3% of variability in change in peak knee adduction moment with the increased trunk sway condition was explained by both differences in SA and SP, and the relationship among these parameters was described by the regression equation ΔKAM = 27.220-4.128 [middle dot] ΔSA-64.785 [middle dot] cos(SP). Hence, not only the amplitude but also the phasing of trunk motion is critical. Not only lower limb movement but also lumbar and thoracic lateral flexion should be considered in the decision making process for an optimal intervention aimed at reducing the load on the medial compartment of the knee during walking. However, these promising findings originated from studies on healthy subjects and their relevance for gait training interventions in patients with presumably painful knee osteoarthritis remains to be determined.

The incidence of anterior cruciate ligament (ACL) injury remains high, and there is a need for simple, cost effective methods to identify athletes at a higher risk for ACL injury. Wearable measurement systems offer potential methods to assess the risk of ACL injury during jumping tasks. The objective of this study was to assess the capacity of a wearable inertial-based system to evaluate ACL injury risk during jumping tasks. The system accuracy for measuring temporal events (initial contact, toe-off), jump height, and sagittal plane angles (knee, trunk) was assessed by comparing results obtained with the wearable system to simultaneous measurements obtained with a marker-based optoelectronic reference system. Thirty-eight healthy participants (20 male and 18 female) performed drop jumps with bilateral and unilateral support landing. The mean differences between the temporal events obtained with both systems were below 5 ms, and the precisions were below 24 ms. The mean jump heights measured with both systems differed by less than 1 mm, and the associations (Pearson correlation coefficients) were above 0.9. For the discrete angle parameters, there was an average association of 0.91 and precision of 3.5° for the knee flexion angle and an association of 0.77 and precision of 5.5° for the trunk lean. The results based on the receiver-operating characteristic (ROC) also demonstrated that the proposed wearable system could identify movements at higher risk for ACL injury. The area under the ROC plots was between 0.89 and 0.99 for the knee flexion angle and between 0.83 and 0.95 for the trunk lean. The wearable system demonstrated good concurrent validity with marker-based measurements and good discriminative performance in terms of the known risk factors for ACL injury. This study suggests that a wearable system could be a simple cost-effective tool for conducting risk screening or for providing focused feedback.

The menisci play an important role in load distribution, load bearing, joint stability, lubrication, and proprioception. Partial meniscectomy has been shown to result in changes in the kinematics and kinetics at the knee during gait that can lead to progressive meniscal degeneration. This study examined changes in the strains within the menisci associated with kinematic and kinetic changes during the gait cycle. The gait changes considered were a 5 deg shift toward external rotation of the tibia with respect to the femur and an increased medial-lateral load ratio representing an increased adduction moment. A finite element model of the knee was developed and tested using a cadaveric specimen. The cadaver was placed in positions representing heel-strike and midstance of the normal gait, and magnetic resonance images were taken. Comparisons of the model predictions to boundaries digitized from images acquired in the loaded states were within the errors produced by a 1 pixel shift of either meniscus. The finite element model predicted that an increased adduction moment caused increased strains of both the anterior and posterior horns of the medial meniscus. The lateral meniscus exhibited much lower strains and had minimal changes under the various loading conditions. The external tibial rotational change resulted in a 20% decrease in the strains in the posterior medial horn and increased strains in the anterior medial horn. The results of this study suggest that the shift toward external tibial rotation seen clinically after partial medial meniscectomy is not likely to cause subsequent degenerative medial meniscal damage, but the consequence of this kinematic shift on the pathogenesis of osteoarthritis following meniscectomy requires further consideration.

The purpose of this study was to introduce a simple gait training method using real-time gait modification to reduce the peak knee adduction moment during walking by producing a subtle weight bearing shift to the medial side of the foot. The hypothesis of this study was that this weight shift could be achieved via either verbal instruction or an active feedback system, and that the weight shift would result in a reduction in the first peak knee adduction moment compared with the control tests. Nine individuals were tested during walking using two intervention methods: verbal instruction and an active feedback system placed on the right shoe. The first peak of the knee adduction moment for each condition was assessed using a motion capture system and force plate. The active feedback system significantly reduced (14.2%) the peak knee adduction moment relative to the control. This study demonstrated that a subtle weight bearing shift to the medial side of the foot produced with an active feedback system during walking reduced the first peak of the knee adduction moment and suggests the potential application of this method to slow the rate of progression of medial compartment knee osteoarthritis.

Accurate subject-specific body segment parameters (BSPs) are necessary to perform kinetic analyses of human movements with large accelerations, or no external contact forces or moments. A new automated topographical image-based method of estimating segment mass, center of mass (CM) position, and moments of inertia is presented. Body geometry and volume were measured using a laser scanner, then an automated pose and shape registration algorithm segmented the scanned body surface, and identified joint center (JC) positions. Assuming the constant segment densities of Dempster, thigh and shank masses, CM locations, and moments of inertia were estimated for four male subjects with body mass indexes (BMIs) of 19.7-38.2. The subject-specific BSP were compared with those determined using Dempster and Clauser regression equations. The influence of BSP and BMI differences on knee and hip net forces and moments during a running swing phase were quantified for the subjects with the smallest and largest BMIs. Subject-specific BSP for 15 body segments were quickly calculated using the image-based method, and total subject masses were overestimated by 1.7-2.9%.When compared with the Dempster and Clauser methods, image-based and regression estimated thigh BSP varied more than the shank parameters. Thigh masses and hip JC to thigh CM distances were consistently larger, and each transverse moment of inertia was smaller using the image-based method. Because the shank had larger linear and angular accelerations than the thigh during the running swing phase, shank BSP differences had a larger effect on calculated intersegmental forces and moments at the knee joint than thigh BSP differences did at the hip. It was the net knee kinetic differences caused by the shank BSP differences that were the largest contributors to the hip variations. Finally, BSP differences produced larger kinetic differences for the subject with larger segment masses, suggesting that parameter accuracy is more important for studies focused on overweight populations. The new image-based BSP estimation method described in this paper addressed the limitations of currently used geometric and regression methods by using exact limb geometry to determine subject-specific parameters. BSP differences have the largest effect on kinetic analyses of motions with large limb accelerations, for joints farther along the kinematic chain from the known forces and moments, and for subjects with larger limb masses or BMIs.

Cartilage morphology change is an important biomarker for the progression of osteoarthritis. The purpose of this study was to assess the accuracy of in vivo cartilage thickness measurements from MR image-based 3D cartilage models using a laser scanning method and to test if the accuracy changes with cartilage thickness. Three-dimensional tibial cartilage models were created from MR images (in-plane resolution of 0.55 mm and thickness of 1.5 mm) of osteoarthritic knees of ten patients prior to total knee replacement surgery using a semi-automated B-spline segmentation algorithm. Following surgery, the resected tibial plateaus were laser scanned and made into 3D models. The MR image and laser-scan based models were registered to each other using a shape matching technique. The thicknesses were compared point wise for the overall surface. The linear mixed-effects model was used for statistical test. On average, taking account of individual variations, the thickness measurements in MRI were overestimated in thinner (<2.5 mm) regions. The cartilage thicker than 2.5 mm was accurately predicted in MRI, though the thick cartilage in the central regions was underestimated. The accuracy of thickness measurements in the MRI-derived cartilage models systemically varied according to native cartilage thickness.

Facet joints provide rigidity to the lumbar motion segment and thus protect the disk, particularly against torsional injury. A surgical procedure that fully or partially removes the facet joints (facetectomy) will decrease the mechanical stiffness of the motion segment, and potentially place the disk at risk of injury. Analytical models can be used to understand the effect of facet joints on motion segment stability. Using a facet joint model that represents the contact area as contact between two surfaces rather than as point contact, it was concluded that a substantial sudden change in rotational motion, due to applied torsion moment, was observed after 75 percent of any one of the facet joints was removed. Applied torsional moment loading produced coupled extension motion in the intact motion segment. This coupled motion also experienced a large change following complete unilateral facetectomy. Clinically, the present study showed that surgical intervention in the form of unilateral or bilateral total facetectomy might require fusion to reduce the primary torsion motion.

A new method for deriving limb segment motion from markers placed on the skin is described. The method provides a basis for determining the artifact associated with nonrigid body movement of points placed on the skin. The method is based on a cluster of points uniformly distributed on the limb segment. Each point is assigned an arbitrary mass. The center of mass and the inertia tensor of this cluster of points are calculated. The eigenvalues and eigenvectors of the inertia tensor are used to define a coordinate system in the cluster as well as to provide a basis for evaluating non-rigid body movement. The eigenvalues of the inertia tensor remain invariant if the segment is behaving as a rigid body, thereby providing a basis for determining variations for nonrigid body movement. The method was tested in a simulation model where systematic and random errors were introduced into a fixed cluster of points. The simulation demonstrated that the error due to nonrigid body movement could be substantially reduced. The method was also evaluated in a group of ten normal subjects during walking. The results for knee rotation and translation obtained from the point cluster method compared favorably to results previously obtained from normal subjects with intra-cortical pins placed into the femur and tibia. The resulting methodology described in this paper provides a unique approach to the measurement of in vivo motion using skin-based marker systems.

This paper examines the biomechanics of total knee arthroplasty as a treatment for arthritis and anterior cruciate ligament (ACL) reconstruction for repair of torn anterior cruciate ligaments of the knee. These are two of the most frequent reconstructive procedures for the knee joint. Functional testing of patients while performing various activities of daily living was used to study the relationship between the intrinsic biomechanics of the knee and function. The results of the study of patients following total knee replacement demonstrated a dynamic interaction between the posterior cruciate ligament and quadriceps function during stairclimbing. The study of patients with ACL-deficient knees demonstrated that loss of the anterior cruciate ligament can cause the avoidance of quadriceps contraction during activities when the knee is near full extension. Other studies demonstrated a relationship between tibiofemoral joint mechanics and patellofemoral mechanics. In addition, the importance of combined ligamentous laxity with higher than normal adduction moments during gait was examined in relationship to progressive degenerative changes to the medial compartment of the knee. In summary, functional testing such as gait analysis has proven to be an important basic research tool as well as extremely effective for clinical testing of new procedures and devices.