Search

The arterial intima is continuously under pulsatile wall shear stresses (WSS) imposed by the circulating blood. The knowledge of the contribution of smooth muscle cells (SMC) to the response of endothelial cell (EC) to WSS is still incomplete. We developed a co-culture model of EC on top of SMC that mimics the inner in vivo structure of the arterial intima of large arteries. The co-cultured model, as well as a monolayer model of EC, were developed in custom-designed wells that allowed for mechanobiology experiments. Both the monolayer and co-culture models were exposed to steady flow induced WSS of up to 24 dyne/cm 2 and for lengths of 60 min. Quantification of WSS induced alterations in the cytoskeletal actin filaments (F-actin) and vascular endothelial cadherin (VE-cadherin) junctions were utilized from confocal images and flow cytometry. High confluency of both models was observed even after exposure to the high WSS. The quantitive analysis revealed larger post WSS amounts of EC F-actin polymerization in the monolayer, which may be explained by the relative help of the SMC to resist the external load of WSS. The VE-cadherin demonstrated morphological alterations in the monolayer model, but without significant changes in their content. The SMC in the co-culture maintained their contractile phenotype post high WSS which is more physiological, but not post low WSS. Generally, the results of this work demonstrate the active role of SMC in the intima performance to resist flow induced WSS., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The physical mechanism that drives blood flow in the valveless tubular embryonic heart is still debatable whether it is peristaltic flow or valveless dynamic suction. Previous studies of valveless pumping were concerned with either the role of the excitation parameters or the mechanisms that generate the unidirectional outflow. In this study, a dimensionless one-dimensional (1D) analysis of the valveless pumping due to local excitation at an asymmetric longitudinal location was performed for non-uniform thick-wall elastic tubes, including tubes with local bulging and tapering. A general tube law that accounts for wall thicknesses was implemented for describing the physically realistic dynamics of the tube and the two-step MacCormack algorithm was utilized for the numerical analysis. A comprehensive analysis was conducted to explore the affecting roles of the system (e.g., tube geometry) and the working (e.g., Strouhal number and flow friction parameter) parameters on the net outflow of the pump. The maximal positive net outflow in all the tested cases always occurred when the natural Strouhal number was about π. Flow reversals were observed only for relatively low friction parameters. A local bulging at the site of excitation and thick walls contributed to larger outflows, while tube tapering reduced the net outflow., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The Publisher regrets that this article is an accidental duplication of an article that has already been published, http://dx.doi.org/10.1016/j.jbiomech.2015.03.019. The duplicate article has therefore been withdrawn. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy., (Copyright © 2015.)

Modeling the complex deformations of cylindrical tubes under external pressure is of interest in engineering and physiological applications. The highly non-linear post-buckling behavior of cross-section of the tube during collapse attracted researchers for years. Major efforts were concentrated on studying the behavior of thin-wall tubes. Unfortunately, the knowledge on post-buckling of thick-wall tubes is still incomplete, although many experimental and several theoretical studies have been performed. In this study we systematically studied the effect of the wall thickness on post-buckling behavior of the tube. For this purpose, we utilized a computational model for evaluation of the real geometry of the deformed cross-sectional area due to negative transmural (internal minus external) pressure. We also developed an experimental method to validate the computational results. Based on the computed cross-sections of tubes with different wall thicknesses, we developed a general tube law that accounts for thin or thick wall tubes and fits the numerical data of computed cross-sectional areas versus transmural pressures., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Embryo transfer (ET) is the final manual intervention during which the newly formed embryo is placed within the uterus by a transcervical catheter. The loading of the syringe-catheter complex with the transferred volume consists of the transfer media (which contains the embryos) separated by air spaces on both sides. The dynamics involved in injecting the syringe-catheter complex is not well understood nor has it been investigated to date. We developed an in vitro experimental setup for simulations of ET into a rigid transparent uterine model. The catheter was loaded in sequences of liquid and air as it is in the clinical setting. The transferred liquid was colored with a dye and its dispersion within the uterine cavity was recorded by a video camera. The results demonstrated, for the first time, the importance of having a gas phase in the catheter load. The resulting air bubbles within the uterus were carried upward towards the fundus by buoyant forces, thereby dragging behind them the transferred liquid which contained the embryos. This could be expected to substantially increase the probability for the embryos to be present near the fundal wall at the time window for implantation. There was also evidence of a dependency of the rate of injection upon the catheter load into the uterus: a low speed generated several air bubbles which led to more of the transferred liquid being carried towards the fundal end, thus possibly enhancing the potential for implantation.

The respiratory muscles constitute the respiratory pump, which determines the efficacy of ventilation. Any functional disorder in their performance may cause insufficient ventilation. This study was designed to quantitatively explore the relative contribution of major groups of respiratory muscles to global lung ventilation throughout a range of maneuvers in healthy subjects. A computerized experimental system was developed for simultaneous noninvasive measurement of inspired/expired airflow, mouth pressure and up to 8 channels of EMG surface signals from major respiratory muscles which are located near the skin (e.g., sternomastoid, external intercostal, rectus abdominis and external oblique) during various respiratory maneuvers. Lung volumes values were calculated by integration of airflow data. Hill's muscle model was utilized to calculate the forces generated by the muscles from the acquired EMG data. Analysis of EMG measurements and respiratory muscles forces revealed the following characteristics: (a) muscle activity increased with increased breathing effort, (b) inspiratory muscles contributed to inspiration even at relatively low flow rates, while expiratory muscles are recruited at higher flow rates, (c) the forces generated by the muscle depended on the muscle properties as well as on their EMG performance and (d) the pattern of the muscle's force curves varied between subjects, but were generally consistent for the same subject regardless of breathing effort.