Search

The composition of biogas may vary significantly due to the diversity of production sources, making it essential to have a detailed knowledge of their thermophysical properties in order to develop and validate methods for the estimation of density, heat capacity and calorific value of biogas and biomethane. In this work the thermodynamic behavior of a synthetic biogas-like mixture, composed of methane (50%), carbon dioxide (35%), nitrogen (10%) and carbon monoxide (5%), is studied through accurate ( p , ρ , T ) experimental data obtained by using a single sinker densimeter with magnetic suspension coupling. The mixture was prepared by the gravimetric method at the Spanish National Metrology Institute (Centro Español de Metrología, CEM) and the accurate density measurements have been performed in the temperature range from (275 to 400) K and pressures up to 20 MPa. This work is part of the research project ‘Metrology for Biogas’ supported by the European Metrology Research Program. Experimental data are compared with the densities calculated with the GERG-2008 equation of state. The deviation between experimental and estimated densities is within a ±0.2% band at all temperatures, except at the lower temperature, 275 K, and pressures from (6 to 15) MPa, which shows a higher deviation. [ABSTRACT FROM AUTHOR]

• Carbon dioxide + propane mixtures are studied through accurate measurements of speeds of sound and phase equilibria. • Heat capacities and virial coefficients are obtained from speeds of sound. • Retrograde condensation zone is found for the (0.60 CO 2 + 0.40 C 3 H 8) mixture. • Results are compared with reference equations of state such as GERG-2008 and AGA8-DC92. This work presents phase envelope and speed of sound data for the (0.60 CO 2 + 0.40 C 3 H 8) and (0.80 CO 2 + 0.20 C 3 H 8) binary mixtures. Phase equilibria was measured using a cylindrical resonator working in the microwave band whereas an acoustic resonator was used for speed of sound measurements. The experimental results were compared with GERG-2008 equation of state, obtaining average absolute deviations by 0.24% in pressure for phase equilibria data and 0.025% for speed of sound data. Speed of sound values were used to derive perfect-gas heat capacities, acoustic virial coefficients, and second density virial coefficients. In addition, AGA8-DC92 equation of state performance was checked for the results derived from speeds of sound. [ABSTRACT FROM AUTHOR]