Search

Herein we describe a methodology to synthesis polyurethane foam molecularly imprinted polymer (PUF-MIP) by using functional monomer for selective extraction of alprazolam. For this purpose, the various percentages of functional monomer are used to synthesis PUF-MIP of alprazolam. To evaluate the selectivity of synthesized PUF-MIP HPLC analysis is applied by introducing caffeine and methadone as an interference. To optimize the proposed technique, effective parameters in the SPE procedure including pH, flow, and salt present is investigated by experimental design. Finally, this method is evaluated in urine sample to monitor alprazolam dosage. In the optimized condition, the synthesized polymer indicates high selectivity value about 71% for alprazolam and 96.8% recovery for MIPUF compared with non-imprinted polyurethane foam (NIPUF). The linear dynamic range (LDR) of 0.03-60 mg L -1 , the limit of detection of 8-10 μg L -1 , the relative standard deviation (RSD, n = 3) of 2.88-3.65 % and quantification of 25-30 μg L -1 is obtained for HPLC analysis based on PUF-MIP extraction., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The preparation of stationary phases with enhanced chemical stability in alkaline eluents has been the principal objective of many chromatographers. New and improved silica substrates and advanced chemical modification methods are among the possibilities being investigated to reach this objective. The present work has evaluated these two possibilities for new stationary phases. First, the silica surface was modified by reaction with zirconium tetrabutoxide to produce zirconized silica particles having about 21% (w/w) of zirconium. Then poly(methyltetradecylsiloxane) (PMTDS) was immobilized onto this surface using different doses (50-120 kGy) of gamma radiation. These new phases were characterized using elemental analysis and infrared and solid-state (29)Si-nuclear magnetic resonance (NMR) spectroscopies. These new stationary phases presented column efficiencies of about 68,000 plates m(-1), symmetric peaks for apolar compounds and retention factors that depend on the irradiation dose and show improved stability in high pH mobile phases. The separation of several pharmaceuticals at pH 11 is presented.