Search

As plant regulators, auxins can promote plant growth. However, they have toxicity and may cause harm to humans. Due to their low concentrations in food sample matrices, the enrichment and analysis of trace auxins in food samples is a challenging work. In this work, a series of hyper crosslinked polymers (HCPs) were synthesized by Friedel-Crafts acylation to extract four auxins (indole-3-acetic acid, indole-3-propionic acid, indole-3-butyric acid and 1-naphthylacetic acid). Among these HCPs, the QP-TC-HCP, synthesized from p-quaterphenyl (QP) and terephthaloyl chloride (TC), showed the best adsorption performance for the auxins. It was then applied as the adsorbent for the solid-phase extraction of the auxins from environmental water and peach beverage samples, followed by high performance liquid chromatography-fluorescence detection. Under the optimized conditions, the limits of detection were 3.0-12.0 pg mL -1 for environmental water and 18.0-36.0 pg mL -1 for peach beverage sample. The method recoveries of the auxins for the spiked samples were in the range of 85.0-110.0%. The established method provided an alternative approach for the determination of auxins in food samples. In addition, different types of organic compounds were tested for the extraction by the QP-TC-HCP to assess its application potential and adsorption mechanism. It was concluded that the QP-TC-HCP had better extraction performance for the compounds with certain hydrophilicity and more hydrogen bonding sites., Competing Interests: Declaration of Competing Interest The authors declare that they have no conflict of interest., (Copyright © 2022 Elsevier B.V. All rights reserved.)

A melamine-based porous organic polymer (mPMF) was synthesized as solid phase extraction (SPE) adsorbent for inline SPE-high performance liquid chromatography (HPLC)-ultraviolet detector (UV) analysis of five phytohormones. Melamine contributed to the rich π-electron and N-containing triazine structure for mPMF, which could form π-π interaction and intermolecular hydrogen bond with COOH containing phytohormones. The synthesized mPMF adsorbent shows extremely high extraction efficiency for five target analytes (>80%) including salicylic acid, indole-3-acetic acid, abscisic acid, 2,4-dichlorophenoxyacetic acid and 1-naphthalene acetic acid. The factors affecting extraction of the target phytohormones were investigated and the optimized experimental conditions were established. The linear range was 0.2-100 μg/L with the limits of detection in the range of 0.06-0.11 μg/L for five target phytohormones. The developed method of mPMF-inline-SPE-HPLC-UV was applied for the analysis of trace target phytohormones in tomato and grape juice samples, and the recovery in the range of 83.1-116% and 87.2-121% was obtained for the spiked tomato and grape juice, respectively. This method has the advantages of high sensitivity and good reproducibility, and it has good application potential for the analysis of phytohormones in fruit samples. Moreover, inline analysis avoided the problems of sample pollution and sample loss, and provided a sample throughput of 5/h., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Due to the high cost of domoic acid (DA), different carboxylic acid compounds including indole-3-acetic acid (IAA), pyrrole-2-formic acid (PFA), pyridine-2,3-dicarboxylic anhydride (PDA), trimesitinic acid (TA) and citric acid (CA) were investigated as dummy templates for the molecularly imprinted solid-phase extraction (MISPE) for selective isolation and pre-concentration of an amnesic shellfish poison (ASP), DA. The highest binding amount of the polymers towards DA was obtained when CA was used as dummy template owing to its high hydrophilicity. In addition, the "four-point" recognition site constructed by three COOH groups and a OH group in CA was also speculated to be the reason for the high binding amount of CA-MIPs and the rebinding of DA can be depend on the three COOH groups and a NH group with conformational change in the recognition process. Finally, the CA-MISPE column was chosen for DA isolation and pre-concentration and effective result was obtained with recoveries higher than 90% and relative standard deviation (RSD) less than 5% (n=3). This new polymer can be effectively applied to the monitoring and predicting the existence of trace DA., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A high-throughput method was developed using liquid chromatography-triple quadrupole mass spectrometry (LC-MS/MS) for the profiling and quantification of 43 phytohormones and their major metabolites, including auxins, abscisic acid, jasmonic acid, salicylic acid, cytokinins and gibberellins in a single sample extract. Considerable matrix effects (MEs) were observed (with most ME values in the range of 29%-84%, but maximum MEs of more than 115%, even up to 206%, existed) in sample extracts for most of the compounds studied. The application of the proposed binary solid-phase extraction using polymer anion and polymer cation exchange resins, was performed to purify 25 acidic and 18 alkaline phytohormones and their major metabolites prior to the LC-MS/MS analysis, which markedly reduced the MEs to acceptable levels, with ME values in the range of ±15%. Moreover, all of the isomers of cytokinins and their metabolites were fully separated on a sub-2μm particle C18 reverse-phase column with the optimized mobile phase consisting of methanol and 5mM ammonium formate. The method showed good linearity for all 43 analytes with regression coefficients (R(2))>0.991. Limits of detection ranged from 0.19 to 7.57 fmol for auxin, gibberellins, abscisic acid and their metabolites, 29.7 fmol for jasmonic acid, 18.1 fmol for salicylic acid, and from 0.03 to 0.31 fmol for cytokinins and their metabolites. The mean recoveries for all of the analytes were from 70.7 to 118.5%, and the inter-day precisions (n=6) were less than 18.7%, with intra-day precisions (n=6) within 25.4%. Finally, 20 compounds were successfully quantified in rice sample profiles using the proposed method, which will greatly facilitate the understanding of hormone-related regulatory networks that influence rice growth and development. To our knowledge, there are limited reports that measure this level of phytohormone species in rice samples using a single analysis., (Copyright © 2016 Elsevier B.V. All rights reserved.)

A new material, graphene oxide/polypyrrole (GO/Ppy), was synthesized by mixing graphene oxide and polypyrrole in a specific proportion. It possesses a unique structure similar to that of foam. A homemade pipette-tip solid-phase extraction (PT-SPE) device, which is more simple and convenient than traditional devices, was used for saving reagents and operation time. When GO/Ppy was used as the adsorbent of PT-SPE for determining three auxins (indole-3-propionic acid, indole-3-butyric acid, and 1-naphthaleneacetic acid) present in trace amounts in papaya juice, it showed high affinity and adsorption capacity for all the three auxins. GO/Ppy-PT-SPE also had a significant capacity for eliminating the interferences from the papaya juice matrix. Under optimized conditions, a good linearity of auxins was obtained in the range 16.3-812.5 ng g(-1); the average recoveries at the three spiked levels of the three auxins ranged from 89.4% to 105.6% with the relative standard deviations ≤ 3.0%. Meanwhile, six papaya juice samples with different growth stages were analyzed under optimum conditions, and trace auxins in the range 18.3-100.6 ng g(-1) were observed. Because of its high selectivity, simplicity, and reliability, the GO/Ppy-PT-SPE method developed herein can be potentially applied for determining trace auxins in complex biological samples., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A strategy to detect and quantify the polar ethylene precursor 1-aminocyclopropan-1-carboxylic acid (ACC) along with the more apolar phytohormones abscisic acid (ABA), indole-3-acetic acid (IAA), jasmonic acid (JA), jasmonic acid-isoleucine conjugate (JA-Ile), 12-oxo-phytodienoic acid (OPDA), trans-zeatin, and trans-zeatin 9-riboside using a single extraction is presented. Solid phase resins commonly employed for extraction of phytohormones do not allow the recovery of ACC. We circumvent this problem by attaching an apolar group to ACC via derivatization with the amino group specific reagent 9-fluorenylmethoxycarbonyl chloride (Fmoc-Cl). Derivatization in the methanolic crude extract does not modify other phytohormones. The derivatized ACC could be purified and detected together with the more apolar phytohormones using common solid phase extraction resins and reverse phase HPLC/electrospray negative ion tandem mass spectrometry. The limit of detection was in the low nanomolar range for all phytohormones, a sensitivity sufficient to accurately determine the phytohormone levels from less than 50mg (fresh weight) of Arabidopsis thaliana and Nicotiana benthamiana tissues. Comparison with previously published phytohormone levels and the reported changes in phytohormone levels after stress treatments confirmed the accuracy of the method., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A simple, convenient and high selective miniaturized molecularly imprinted matrix solid-phase dispersion (mini-MI-MSPD) technique using l-tryptophan-imprinted polymers as sorbents was proposed for simultaneous extraction of four auxins (indole-3-acetic acid (IAA), indole-3-propionic acid (IPA), indole-3-butyric acid (IBA) and 1-naphthaleneacetic acid (NAA)) from orange samples coupled with high performance liquid chromatography-ultraviolet detection. The molecularly imprinted polymers (MIPs) synthesized using l-tryptophan as dummy template showed high affinity and selectivity to auxins, and so they were applied as the specific dispersant of MSPD to simultaneously eliminate the effect of template leakage on quantitative analysis. Under the optimized conditions, good linearity was obtained in a range of 0.02-2.00 μg g(-1) and the average recoveries of four auxins at three spiked levels ranged from 87.6% to 104.5% with the relative standard deviation (RSD) ≤4.4%. The presented mini-MI-MSPD method combined the advantages of MSPD for allowing the extraction, dispersion and homogenization in a single step and the advantages of MIPs for high affinity and selectivity towards four auxins, which could be applied to the determination of auxins in complicated vegetal samples., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Auxin is a crucial phytohormone for precise control of growth and development of plants. Due to its low concentration in plant tissues which are rich in interfering substances, the accurate determination of auxins remains a challenge. In this paper, a new strategy for isolation and enrichment of auxins from plant tissues was obtained by the magnetic molecularly imprinted polymer (mag-MIP) beads, which were prepared by microwave heating initiated suspension polymerization using indole-3-acetic acid (IAA) as template. In order to obtain higher selective recognition cavities, an enhanced imprinting method based on binary functional monomers, 4-vinylpyridine (4-VP) and β-cyclodextrin (β-CD), was adopted for IAA imprinting. The morphological and magnetic characteristics of the mag-MIP beads were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy and vibrating sample magnetometry. A majority of resultant beads were within the size range of 80-150μm. Porous surface morphology and good magnetic property were observed. Furthermore, the mag-MIP beads fabricated with 4-VP and β-CD as binary functional monomers exhibited improved recognition ability to IAA, as compared with the mag-MIP beads prepared with the individual monomer separately. Competitive rebinding experiment results revealed that the mag-MIP beads exhibited a higher specific recognition for the template than the non-imprinted polymer (mag-NIP) beads. An extraction method by mag-MIP beads coupled with high performance liquid chromatography (HPLC) was developed for determination of IAA and indole-3-butyric acid (IBA) in plant tissues. Linear ranges for IAA and IBA were in the range of 7.00-100.0μgL(-1) and 10.0-100.0μgL(-1), and the detection limits were 3.9 and 7.4μgL(-1), respectively. The analytical performance was also estimated by seedlings or immature embryos samples from three different plant tissues, pea, rice and wheat. Recoveries were in the range of 70.1-93.5%. The results show that the present imprinting method is a promising approach for preparation of selective adsorbents for sample preparation of auxin analysis in plant tissues., (Copyright © 2010 Elsevier B.V. All rights reserved.)

The low concentrations of the auxins in samples of plant tissue necessitate the use of selective and sensitive techniques for their quantification. Herein a selective and sensitive method based on dual-cloud point extraction (dCPE) and tertiary amine labeling for the quantification of indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA) by capillary electrophoresis-electrochemiluminescence (CE-ECL) is proposed. The procedure for dCPE included two cloud point processes with Triton X-114 as the extractant. The two auxins became hydrophobic in an acidic solution and were extracted into surfactant-rich phase after the first cloud point procedure. They were then back-extracted into the alkaline aqueous phase during the second cloud point step. The extracted auxins were reacted with 2-(2-aminoethyl)-1-methylpyrrolidine (AEMP) in acetonitrile that contained N,N'-dicyclohexylcarbodiimide and 3,4-dihydro-3-hydroxy-4-oxo-1,2,3-benzotriazine to produce their AEMP-derivatives. The two auxin-AEMP-derivatives were subjected into CE and detected by Ru(bpy)(3)(2+)-based ECL. The preconcentration factors for IAA and IBA with dCPE were 40.5 and 43.4, respectively. The on-capillary detection limits (S/N=3) were 2.5 and 2.8nM for IAA and IBA. This protocol presents a clear advantage in that it reduces the interference from the matrixes extensively and gives a high sensitivity for the detection of auxins. The proposed method was applied successfully to the detection of the two auxins in acacia tender leaves, buds, and bean sprout., (Copyright 2009 Elsevier B.V. All rights reserved.)

A novel, simple, and economical method for the preparation of open-tubular capillary column using polydopamine coating was reported for the first time. After the capillary was filled with dopamine solution for 20h, polydopamine was formed and deposited on the inner wall of capillary as permanent coating via the oxidation of dopamine by the oxygen dissolved in the solution. Moreover, the electroosmotic flow of the coated capillaries was measured to be dependent on the repetitive coating times. The performance of the polydopamine-coated capillary electrochromatography was validated by the analysis of four auxins, indole-3-butyric acid (IBA), 2,4-dichlorophenoxyacetic acid (dCPAA), indole-3-acetic acid (IAA), and phenoxyacetic acid (PAA). The precisions (RSD, n=5) were in the range of 1.6-2.4% for migration time, 4.0-6.5% for peak area response, and 3.6-4.7% for peak height response for the four auxins at 1microgmL(-1) level. The detection limits were 0.185, 0.172, 0.177, and 0.259microg/mL for IBA, dCPAA, IAA, and PAA, respectively. The method was successfully used to the determination of IAA in the culture media of IAA-producing bacteria.

Currently, the information available on the physiological functions of melatonin in higher plants is rather limited and the role of plant melatonin in human health remains undetermined. Research in this area has been slow due to lack of efficient analytical methods for rapid identification and quantification of the melatonin and related compounds in complex plant matrices. In this communication, we report the development of a rapid, accurate method for extraction, detection and quantification of plant melatonin, serotonin and indole-3-acetic acid (IAA) by Liquid chromatography-tandem mass spectrometry (LC-MS/MS) with electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI), and atmospheric pressure photoionization (APPI), respectively. The limit of detection (LOD) of melatonin in the plant extraction was 5 pg/ml and the limit of quantification (LOQ) was 0.02 ng/ml, as well as LOD for serotonin was 100 pg/ml and the LOQ was 5 ng/ml, LOD for IAA was 50 pg/ml and the LOQ was 0.7 ng/ml. There was a linear relationship between melatonin, serotonin, and IAA concentration and peak area over a quantifiable range of 0.02 ng/ml to 0.1 mg/ml, 5 ng/ml to 0.1 mg/ml, and 0.7 ng/ml to 0.1 mg/ml, respectively, in the plant extract.

A new approach to high speed, comprehensive online dual gradient elution 2DLC (LCxLC) based on the use of ultra-fast, high temperature gradient elution reversed phase chromatography is described. Entirely conventional gradient elution instrumentation and columns are assembled in a system which develops a total peak capacity of about 900 in 25 min; this is equivalent to roughly one peak/2 s. Each second dimension gradient is done in a cycle time of 21 s and the peak retention times measured for a set of twenty six indole-3-acetic acid (IAA) derivatives are reproducible to 0.2 s. Each peak eluting from the first dimension column is sampled at least twice across its width, as the corresponding peaks on the second dimension column appear in two or three consecutive second dimension chromatograms, clearly indicating that there is little loss in the resolution gained in the first dimension separation. Application to the separation of the low molecular weight components of wild-type and mutant maize seedlings indicates the presence of about 100 peaks on a timescale of 25 min. Compelling illustrations of the analytical potential of fast, high temperature 2DLC are evident in the clear presence of nine distinct peaks in a single second dimension chromatogram from a single quite narrow first dimension peak, and the great power of 2DLC to solve the "analytic dynamic range" problem inherent in the measurement of small peaks that are neighbors to a gigantic peak.

A method for separation and purification of plant hormones auxin and abscisic acid based on mixed mode reversed-phase anion-exchange solid phase extraction and two-dimensional HPLC was developed. Two-dimensional HPLC in "heart cutting" mode was very efficient in the purification of these two hormones. Its purification power is high enough to allow reliable on-line quantification of both hormones even with non-selective detectors.

The development of a robust method to analyse the content of tryptophan and of indole-3-acetic acid at the microgram per litre level in must and wine is necessary in order to study the formation of 2-aminoacetophenone and of other indole compounds causing the 'untypical ageing off-flavour'. The present paper discusses the development and validation of a reversed-phase high-performance liquid chromatography method with fluorescence detection for the analysis of indole-3-acetic acid, tryptophan, tryptophol, indole and skatole in must and white wine. The required selectivity and sensitivity was gained through the solid-phase extraction on a polystyrene-based polymer column.