Search

• Recent advances in paper/thread-based zone and capillary electrophoresis techniques. • Various sample pretreatment methods using electrophoresis on wicking substrates. • Review of unmodified and modified microfluidic paper/threat -based chromatography. • Application of paper/threat -based chromatography in blood separation. Paper and thread are widely used as the substrates for fabricating low-cost, disposable, and portable microfluidic analytical devices used in clinical, environmental, and food safety monitoring. Concerning separation methods including chromatography and electrophoresis, these substrates provide unique platforms for developing portable devices. This review focuses on summarizing recent research on the miniaturization of the separation techniques using paper and thread. Preconcentration, purification, desalination, and separation of various analytes are achievable using electrophoresis and chromatography methods integrated with modified or unmodified paper/thread wicking channels. A variety of 2D and 3D designs of paper/thread platforms for zone electrophoresis, capillary electrophoresis, and modified/unmodified chromatography are discussed with emphasis on their limitation and improvements. The current progress in the signal amplification strategies such as isoelectric focusing, isotachophoresis, ion concentration polarization, isoelectric focusing, and stacking methods in paper-based devices are reviewed. Different strategies for chromatographic separations based on paper/thread will be explained. The separation of target species from complex samples and their determination by integration with other analytical methods like spectroscopy and electrochemistry are well-listed. Furthermore, the innovations for plasma and cell separation from blood as an important human biofluid are presented, and the related paper/thread modification methods are explored. [ABSTRACT FROM AUTHOR]

Abstract: A novel and simple method for the determination of active endocrine disrupter compounds (octylphenol OP, and nonylphenol NP) in paper using microwave-assisted extraction (MAE) and headspace solid-phase microextraction, coupled with gas chromatography–mass spectrometry has been developed. Parameters affecting the efficiency in the MAE process such as exposure time and extraction solvent were studied in order to determine operating conditions. The optimised method was linear over the range studied (1.25–125μgkg-1 for OP and 9.50–950μgkg-1 for NP) and showed good level of precision, with a RSD lower than 10% and detection limits at 0.10 and 4.56μgkg-1 for OP and NP, respectively. The results obtained from six different types of paper revealed the presence of the target compounds in all samples analysed, at levels ranging between 3 and 211μgkg-1. [Copyright &y& Elsevier]

In this study, capillary electrophoresis (CE) was used for separation of inorganic and organic ions from waters of paper and paperboard machines at mills. The instrument was constructed for on-line measurements by building a batch-type sample feeding unit. Chloride, thiosulphate, sulphate, oxalate, sulphite, hydrogen sulphide, formate, carbonate, phosphate and acetate in the process water samples were separated using an ion-specific separation system in CE with dicarboxylic acid buffer (pH 8.2), with pyridinium-2,3-dicarboxylic acid modified with commercial NICE-Pak OFM&z.sbnd;OH solution (pH 12.0) or with a cetyltrimethylammonium bromide solution modified with chromate (pH 10.6). In addition, Analis CEofix Anions 8 electrolyte solution was tested in on-line studies at mills. It allowed 5 min separation time for the anions. Aluminium was determined at pH 3.6 in 10 min by using a laboratory-made imidazole buffer modified with 18-crown 6-ether. The developed CE systems were used to monitor the concentrations of sulphur species in dithionite degradation, to estimate corrosion degree in the water tanks, to monitor formaldehyde as the biocide chemical in wire washing and, in general, to observe process disturbances resulting from chemical feedings and their sites. The CE combination was on-line coupled to eight different process machines for continuous monitoring of concentrations for periods between two weeks and one month at paper and pulp mills in Finland. [Copyright &y& Elsevier]

Solid-phase microextraction (SPME) coupled to gas chromatography/mass spectrometry (GC/MS) has been applied to the analysis of volatile organic compounds emitted from a naturally aged groundwood pulp paper originating from an old book in order to access the products produced through the decomposition reactions occurring in paper upon ageing. Two different extraction methods were developed and compared: headspace SPME and contact SPME. The influence of few extraction parameters were tested in order to define the best extraction conditions. An optimised non-destructive contact SPME method was elaborated and allowed the characterisation of more than 50 individual constituents. [Copyright &y& Elsevier]

We studied the aging behaviour of gelatin used to size paper. Thus far, research on the aging of paper has largely ignored the sizing agent. Degradation of the protein was characterised and the impact of paper components, such as cellulose, and aluminium potassium sulphate was evaluated. Whatman No. 1 filter papers sized with two types of gelatins (A and B) were prepared as model samples. Commercially sized modern papers (Arches) were also studied in order to compare laboratory samples with real artist papers. Both types of papers were artificially aged (80 °C, 50% relative humidity for 35 and 94 days). Historic papers were included in the study in order to compare artificially aged with naturally aged gelatin. The aqueous extracts from the papers were characterised by aqueous size-exclusion chromatography (SEC) using four PL-Aquagel-OH columns and UV photodiode array detection at 220, 254 and 280 nm. Results showed that gelatin undergoes hydrolysis upon aging, type A gelatin showing a faster degradation rate than type B. The result was an increase in the lower-molar-mass fractions, under 50 000 g mol−1, and especially in a characteristic fraction with a peak molecular mass (Mp) of 14 000 g mol−1. A significant decrease in the extraction yields of α-, β- and γ-chains occurred after aging. This was attributed to crosslinking, leading to the formation of less-soluble polypeptides with very high molar mass (>800 000 g mol−1). Less than 10% alum had no impact on the degradation rate; higher alum contents accelerated hydrolysis reactions. [Copyright &y& Elsevier]