Search

Determination of busulfan concentration in patients undergoing bone marrow transplantation is necessary in order to reduce toxic effects and/or graft rejection due to unadjusted dose exposure. A new extraction method namely dispersive micro solid phase extraction (DMSPE) based on mesoporous sorbent was used for cleaning-up the plasma samples. DMSPE coupling with liquid chromatography with tandem mass spectrometry (LC-MS/MS) was implemented for the determination of busulfan dosage in plasma samples. The linear range was found from 10 to 2000 ng/ml. The precision and accuracy were found better than 15% according to Food and drug Administration (FDA) guideline. This method was successfully used to determine the busulfan in patients administrated busulfan as part of the preparative regimen for bone marrow transplantation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Busulfan and melphalan are cytotoxic DNA alkylating agents that are used in many hematopoietic stem cell transplantation (HCT) conditioning regimens. We report the development of an assay using turbulent flow liquid chromatography (TFLC) and tandem mass spectrometry to simultaneously measure the concentration of busulfan (Bu) and melphalan (Mel) in human plasma. The method involves precipitating proteins in the plasma specimen with an organic solvent containing deuterated internal standards of both compounds. Following centrifugation, an aliquot of the supernatant was injected into the TFLC mass spectrometry system operated in the positive ion mode. The analytical measurement range for both compounds was 10-5000 ng/mL, and with validated dilutions the reportable range was extended to 25,000 ng/mL. Intra-day and inter-day (n = 20 day) precision studies showed a coefficient of variation (CV) of <7% at several concentrations across the measurement range. To determine accuracy recovery studies were performed at several concentrations spanning the measurement range. Recoveries for both compounds were between 98 and 103%. Additionally, busulfan was compared with an existing assay and showed excellent correlation. Experiments were conducted to rule out matrix effects, carryover and interference from endogenous substances. The validated clinically reportable range (CRR) and assay precision will allow this assay to be used clinically to monitor and adjust Mel and Bu levels to ensure better therapeutic outcomes and also to support clinical trials aimed at better defining therapeutic ranges., (Copyright © 2019 Elsevier B.V. All rights reserved.)

In allogeneic hematopoietic cell transplantation (HCT) it has been shown that over- or underexposure to conditioning agents have an impact on patient outcomes. Conditioning regimens combining busulfan (Bu) and fludarabine (Flu) with or without clofarabine (Clo) are gaining interest worldwide in HCT. To evaluate and possibly adjust full conditioning exposure a simultaneous analysis of Bu, F-ARA-A (active metabolite of Flu) and Clo in one analytical run would be of great interest. However, this is a chromatographical challenge due to the large structural differences of Bu compared to F-ARA-A and Clo. Furthermore, for the bioanalysis of drugs it is common to use stable isotope labelled standards (SILS). However, when SILS are unavailable (in case of Clo and F-ARA-A) or very expensive, standard addition may serve as an alternative to correct for recovery and matrix effects. This study describes a fast analytical method for the simultaneous analysing of Bu, Clo and F-ARA-A with liquid chromatography-tandem mass spectrometry (LC-MS/MS) including standard addition methodology using 604 spiked samples. First, the analytical method was validated in accordance with European Medicines Agency guidelines. The lower limits of quantification (LLOQ) were for Bu 10μg/L and for Clo and F-ARA-A 1μg/L, respectively. Variation coefficients of LLOQ were within 20% and for low medium and high controls were all within 15%. Comparison of Bu, Clo and F-ARA-A standard addition results correspond with those obtained with calibration standards in calf serum. In addition for Bu, results obtained by this study were compared with historical data analysed within TDM. In conclusion, an efficient method for the simultaneous quantification of Bu, Clo and F-ARA-A in plasma was developed. In addition, a robust and cost-effective method to correct for matrix interference by standard addition was established., (Copyright © 2017 Elsevier B.V. All rights reserved.)

For the last decade an alkylating agent treosulfan (TREO) has been successfully applied in clinical trials in conditioning prior to hematopoietic stem cell transplantation. Pharmacological activity of the pro-drug depends on its epoxy-transformers, monoepoxide (S,S-EBDM) and diepoxide (S,S-DEB), which are formed in a non-enzymatic consecutive reaction accompanied by a release of methanesulfonic acid. In the present study partition coefficient n-octanol/water (POW) of TREO as well as its biologically active epoxy-transformers was determined empirically (applying a classical shake-flask method) and in silico for the first time. In vitro the partition was investigated at 37°C in the system composed of the pre-saturated n-octanol and 0.05 M acetate buffer pH 4.4 adjusted with sodium and potassium chloride to ionic strength of 0.16 M. Concentration of the analytes was quantified by reversed-phase high performance liquid chromatography (RP-HPLC) method in which retention time increased from S,S-DEB to TREO. It was shown that neither association nor dissociation of the tested compounds in the applied phases occurred. Calculated logPOW (TREO: -1.58±0.04, S,S-EBDM: -1.18±0.02, S,S-DEB: -0.40±0.03) indicate the hydrophilic character of the all three entities, corresponding to its pharmacokinetic parameters described in the literature. Experimentally determined logPOW of the compounds were best comparable to the values predicted by algorithm ALOGPs. Interestingly, the POW values determined in vitro as well as in silico were inversely correlated with the retention times observed in the endcapped RP-HPLC column. It might be explained by the fact that a cleavage of methansulfonic acid from a small molecule of TREO generates significant changes in the molecular structure. Consequently, despite the common chemical origin, TREO, S,S-EBDM and S,S-DEB do not constitute a 'congeneric' series of compounds. We concluded that this might occur in other low-weight species, therefore measurement of their POW by RP-HPLC had to be applied with a special care., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Busulphan is an alkylating agent used as conditioning regimen prior to stem cell transplantation. Busulphan is metabolized in the liver and four major metabolites have been identified. The first metabolite is tetrahydrothiophene which is oxidized to tetrahydrothiophene 1-oxide, then sulfolane and finally 3-hydroxy sulfolane. Despite the low molecular weight and wide polarity range of busulphan and its four metabolites, the use of a fused silica non-polar column significantly enhanced the automated gas chromatography-mass spectrometry of their detection in one simple method. The limit of quantification was 0.5μM for busulphan and all its metabolites except 3-OH sulfolane, which was 1.25μM. This method was validated for all the compounds in both human plasma and urine. Lower limits of quantifications (LLOQs) were run in pentaplicate per compound and all results were within 20% of the nominal values. The recovery was determined by comparing the peak area of two quality control (QC) samples, before and after extraction in plasma and urine, in triplicate. Acceptable precision and accuracy have been obtained; at least 3 standard curves have been run for each compound using three different QCs covering the calibration curve in triplicate. The QC values were within 15% (SD) of the nominal values. Selectivity and sensitivity of all compounds have been measured. Compounds were stable up to 50 days after extraction in -20°C and 48h at RT. Moreover, the compounds were stable for three cycles of freezing and thawing. The method was applied in a clinical case where the patient received high dose busulphan; all the compounds have been detected, identified and quantified both in plasma and urine., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Busulfan is used in myeloablative preparation regimens for hematopoietic bone marrow transplantation. Due to its narrow therapeutic range therapeutic drug monitoring of busulfan is recommended. In this study a fast and simple method for measuring busulfan in serum or plasma by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been developed utilizing turbulent flow online extraction technology. Serum or plasma was mixed with acetonitrile containing d(8)-busulfan. After centrifugation the supernatant was injected onto a turbulent flow preparatory column then transferred to a C18 analytical column monitored by a tandem mass spectrometer set at positive electrospray ionization. The analytical cycle time was 4.0min. The method was linear from 0.15 to 41.90μmol/L with an accuracy of 87.9-103.0%. Inter- and intra-assay CVs across four concentration levels were 2.1-7.8%. No significant carryover or ion suppression was observed. No interference was observed from commercial control materials containing more than 100 compounds. Comparison with a well established LC-MS/MS method using patient specimens (n=45) showed a mean bias 1.3% with Deming regression of slope 1.02, intercept -0.02μmol/L, and a linear correlation coefficient 0.9883. The LC-MS/MS method coupled with turbulent flow online sample cleaning technology described here offers reliable busulfan quantitation in serum or plasma with minimum manual sample preparation and was fully validated for clinical use., (Copyright © 2010 Elsevier B.V. All rights reserved.)

A direct and selective HPLC method with refractometric detection was worked out for determination of treosulfan in plasma and urine of children. Before injection onto reverse phase column plasma samples with treosulfan and barbital (I.S.) were clarified using filtration. The mobile phase was composed of phosphate buffer, pH 5 and acetonitrile. The linear range of the standard curve of treosulfan spanned concentrations of 10.0-2000.0 microg/ml and 50.0-10000.0 microg/ml in plasma and urine, respectively, and covered the levels found in biological fluids after infusion of the drug. The limit of detection amounted to 5 microg/ml for plasma and 25 microg/ml for urine. Intra- and inter-day precision and accuracy of the measurement fulfilled analytical criteria accepted in pharmacokinetic studies. Recovery of treosulfan as well as stability in biological fluids was also calculated. The validated method was successfully applied in pharmacokinetic studies of treosulfan administered to children prior to haematopoietic stem cell transplantation. Differences between pharmacokinetics of treosulfan in children and adults were also studied.