Search

Abstract Papermaking enterprises are currently under both environmental pressure and economic pressure for sustainable development in China. Thus, the efficiency, effectiveness, and benefits of resource utilization need to be improved. High-consumption and high-pollution companies should manufacture paper using sustainable methods. This study highlights a resource value flow analysis from the circular economy perspective, developing an extension of material flow cost accounting and modifying it by accounting for environmental damage as well as economic benefits. With reference to the Plan-Do-Check-Act cycle, this specific case study was conducted to verify the comprehensive utility of resource value flow analysis by establishing decision-making prioritization according to the dualistic diagnosis of "internal resource loss–external environmental damage costs." In general, applying a resource value flow analysis can both reduce resource consumption and minimize environmental damage, enhancing the sustainable development of a process industry with limited resources. Highlights • Material flows and value flows form an interactive unit in the resource value flow analysis model. • The resource value flow analysis model extends the environmental dimension of material flow cost accounting. • A dualistic diagnosis of "internal resource loss and external environmental damage costs" can achieve both economic profits and environmental benefits. • The Plan-Do-Check-Act cycle was introduced to strengthen the practical application of the resource value flow analysis. [ABSTRACT FROM AUTHOR]

Chemical upcycling of plastic waste from landfills to value-added products offers both economic and environmental benefits. Reported here is a simple method to convert high-density polyethylene (HDPE) into upcycled waxes in a very high yield (up to 93%). This selectivity is achieved by reducing the degradation temperature of HDPE via the addition of an inexpensive and reusable sodium chloride. These upcycled waxes had performance comparable to those of commercial rheology modifiers. In addition, kraft paper coated with these upcycled waxes exhibited excellent water- and oil resistance. A preliminary revenue analysis showed that this innovation allows plastic-to-wax to conversion with a three-fold revenue benefit over traditional ways of producing pyrolysis waxes from plastics. Also, sodium chloride reduces the pyrolysis temperature, thus reducing energy consumption and greenhouse gas emissions, supporting cleaner production, a circular economy, and generating less environmental pollution. The underlying concept reported herein can be extended to major plastics by reducing the degradation temperatures of plastics, thereby obtaining even better control over the pyrolysis products. Thus, these findings have the potential to enhance the circular economy of plastics and protect our environment from plastic waste. SYNOPSIS. Chemical upcycling of post-consumer polyethylene via a sodium chloride-catalyzed process. [Display omitted] • Demonstrated table salt-assisted pyrolysis of high-density polyethylene. • Converted polyethylene into upcycled waxes at mild temperatures and in high-yield. • Used upcycled waxes as rheology modifiers and water-proof coating material. • Performed preliminary revenue analysis. [ABSTRACT FROM AUTHOR]

This comprehensive review explores recent advancements in the manufacturing of cellulose nanofiber (CNF)-based cellulose nanopaper (CNP). The analysis delves into customizing CNPs through nanofiber manufacturing, mechanical refining, and chemical treatments. The report underscores the growing interest in CNPs derived from CNF due to their exceptional properties and eco-friendly attributes. CNP strength significantly enhanced through mechanical refining encompassing cellulose nanofibrillation were breaking down of cellulose into nanofibers takes place. Conversely, dense CNF network formed through filtration and casting method. Chemical treatments such as dispersion, functionalization, and coating methods followed by drying and consolidation introduce custom functionalities for diverse applications. These applications span packaging, electronics, energy harvesting, EMI shielding, optoelectronics, nanogenerators, transparent conducting films, water treatment, bioelectronics, and neuromorphic computing. The study conducts an in-depth investigation to assess CNP's effects on promoting sustainability and minimizing environmental waste, making a significant contribution to the circular economy. This investigation underscores the pursuit of innovation and aligns with the principles of progressing toward a more environmentally sustainable future. [Display omitted] • Explores CNF production, refining and chemical treatments for CNP customization. • Remarkable properties of CNP draw academic and industrial interest. • CNP applied in packaging, electronics, energy, and environmental science. • Investigates role of CNP in circular economy. • Emphasizes CNPs as eco-friendly, fostering innovation and sustainability. [ABSTRACT FROM AUTHOR]

The study investigates for the first time the possibility of using carbon rich paper recovery sludge, and nitrogen rich meat processing industry waste as cultivation medium for the production of high value enzymes needed in the respective industries. The complex cellulose rich deinking sludge was able to support the growth of many industrially relevant enzyme producing microorganisms (Bacillus licheniformis, Candida cylindracea, Aspergillus oryzae, Trichoderma reesei) and of recombinant enzyme producers (Escherichia coli and Pichia pastoris). Further detailed studies with Trichoderma reesei as model organism demonstrated that the organism was able to grow optimally in the presence of 40gL-1 paper sludge as carbon source and 67.5 gL-1 pasteurised blood as nitrogen source substituted in Mandels medium. Under these conditions cellulase activities up to 28.1 nkat FPU were achieved. Anyhow, to achieve these results pretreatment of both waste streams is inevitable. In summary, this study provides the practical basis for a valorisation systems of paper industry waste to produce valuable enzymes to be used on-site in paper processing or for other purposes. Image 1 • Blood and paper waste used for microorganism growth. • Growth and cellulase production achieved utilising blood waste streams. • Pretreatment of paper waste and blood waste is necessary. • Waste to Value with in house use of cellulase in paper industry. [ABSTRACT FROM AUTHOR]

Collection, as the first stage of the recycling process, and pre-processing to increase waste stream purity constitute key operations for achieving high recycling rates and a closed loop in the circular economy. For wastepaper recycling in Hong Kong, it is the semi-formal-informal recycling (SFIR) sector that plays a central role in both stages. This study analyses the so far little explored SFIR stakeholder network in Hong Kong and sheds light on value chains, recovered waste paper quantities and the impact of policies on the sector. The findings show that SFIR stakeholders reclaim 55.6 t/recycling station/month of wastepaper and thereby achieve about a 5.7 times higher reclaim rate than the formal-private recycling system. Critical to this achievement is the SFIR transaction network, which enables its stakeholders to develop a value chain and thereby generate an added value of around 1900 HKD (243.9 USD/t) for wastepaper. Given limited circular structures in Hong Kong, financial subsidies are critical to sustain the SFIR's operations over the short-term. However, over the long-term legalization and integration of its stakeholders are necessary to ensure an economically and socially sustainable wastepaper recovery system in Hong Kong. [Display omitted] • Qualitative & quantitative analysis of the semi-formal-informal recycling (SFIR) sector. • The SFIR's wastepaper value chain achieves a cumulative added value of 1900 HKD/t. • The SFIR recovered 5.7 times higher capacities than the formal system in 2021. • Financial support can enhance the SFIR sector's recovery capacities. [ABSTRACT FROM AUTHOR]

Production systems are being restructured to close production cycles via implementing circular economy (CE) practices. The planted tree industry in Brazil has shown potential for applying CE practices due to its efficient use of resources and inclination towards environmental innovation. However, some gaps and difficulties have been observed in several industrial segments so that the logic of the circular production system is put into practice more effectively and intensely. In this context, the aim was to investigate the use and impacts of CE practices in the Brazilian planted tree industry by sector of operation and scale of enterprises based on the ReSOLVE framework. Data were collected from 34 companies that answered a questionnaire, corresponding to 47.2% of Brazilian planted tree industry companies. Data analysis involved univariate and multivariate statistical techniques, considering the grouping of companies by sector of activity (forest producer, pulp and paper, and timber processing) and scale (small, medium, and large). The results revealed that "pulp and paper" and medium- and large-scale companies had the most significant application of CE practices and reported more significant impacts. [Display omitted] • Explores a segmented analysis of the circular economy by scale and sub-sector groups. • Scores of circular practices and their impacts are presented according to the groups. • The association between circular practices and impacts by group are analyzed. • Propositions to enable the adoption of circular practices are presented. [ABSTRACT FROM AUTHOR]

In this paper we investigate the market size of all materials and products presently produced from (organic) carbon and we present a method to estimate the intrinsic recycling potential of these materials/chemicals as a function of their respective applications. The method is based on the expert assessment of a number of variables that are important within the different application categories and markets of the carbon-based materials/chemicals. Applying the method, the paper presents the recycling potential of all carbon-based products. Following, an estimation of the amount of new products that can be produced each year through recycling of discarded products is presented and the amount of carbon that needs to come from other sustainable sources to fulfil our demand for new products is calculated. We distinguish nine different categories of (organic) carbon-based materials/chemicals: plastics, textile fibres, thermoset resins, rubbers, surfactants, solvents, fine chemicals, paper/board and wood products. Within these nine categories the most important materials/chemicals types were taken into account. Fossil-based and bio-based materials/chemicals were assessed separately. For each of the materials/chemicals types, the market size in terms of mass (Mt) was calculated for the main applications in which they are applied. Next, for all materials/chemicals types in these applications, the maximum recycling potential, in case mechanical or physical recycling methods are applied, was assessed, using an expert panel. Also, inevitable leakage of materials/chemicals in the different applications was assessed. Finally, the amount of feedstock coming from recycling streams that may be made available for chemical recycling or carbon capture and utilisation technologies was derived. From this, the magnitude of carbon-based materials/chemicals that need to be replaced each year by other renewable feedstock than recycled content in terms of Mton carbon was calculated. The analysis is relevant in view of implementation of a circular economy and reuse and recycling of materials, to combat depletion of raw materials. Next, it is relevant in view of phasing out fossil-feedstock to combat climate change. Our analysis indicates that the recycling potential of carbon-based materials and products through mechanical or physical methods lies around 50%, even in a system that is fully optimised for recycling. Chemical recycling and carbon capture and utilisation may provide another 25% of the renewable-carbon feedstock needed, but they generally require far more energy and other inputs to produce new materials and chemicals than the mechanical and physical recycling methods. The remaining demand for renewable-carbon feedstock thus needs to come from either biomass or CO 2 through carbon capture and utilisation technologies. Based on our findings, we argue that the composition of our present carbon-based products pool needs to be redesigned on a fundamental molecular level, towards material types that contain more oxygen. Carbon-based materials that contain more oxygen generally can be recycled more efficiently, and are also easier to produce from the alternative feedstocks biomass and CO 2 through CCU. [ABSTRACT FROM AUTHOR]

The aim of this research was to quantify and compare the environmental impact of a number of different deinking sludge utilization approaches. A comparative life cycle assessment of deinking sludge material and energy recovery was performed for the baseline scenario—landfill disposal, and four alternative scenarios: two cement plants, a lightweight aggregate plant, and a stone wool plant. Sludge pretreatment and transportation processes were included in the scenario analyses. The results of the life cycle assessment showed that the use of dry deinking sludge in a cement plant in Finland, 45 km from the point of supply of the deinking sludge, to substitute 46% of the petcoke and 2.7% of the limestone showed the best performance. Therein, a global warming potential reduction of 13% and an eutrophication potential reduction of 12% – the highest reduction out of all impact categories studied – were achieved. A similar reduction in global warming potential of 12% was achieved when deinking sludge was incinerated and the ash utilized in cement production in a Russian plant located 350 km from the paper mill. However, abiotic depletion potential and acidification potential slightly increased by 2.6 and 1.5%, respectively. A maximum reduction of 2.1% out of al impact categories was achieved when dry sludge was used in a lightweight aggregate plant. That is considerably less compared to the reduction achieved at the cement plants. The use of deinking sludge ash in a stone wool plant to substitute 25% of cement resulted in a maximum reduction of 25% in the ozone layer depletion potential. Thus, the utilization of deinking sludge in construction materials production while preventing its landfilling has beneficial effects on the environment, in particular decreased greenhouse gas emissions. [ABSTRACT FROM AUTHOR]

The textile industry is facing increasing criticism because of its intensive use of resources –both natural and fossil derived– and the negative environmental and societal impacts associated with the manufacturing, use and disposal of clothes. This has led to a desire to move towards a circular economy for textiles that will implement recycling concepts and technologies to protect resources, the environment and people. So far, recycling processes have been focused on the chemical and mechanical reuse of textile fibres. In contrast, bio-based processes for textile production and recycling have received little attention, beyond end-of-life composting. However, the selectivity and benign processing conditions associated with bio-based technologies hold great promise for circularising the textile life cycle and reducing the environmental impacts of textile production and processing. Developing circular and sustainable systems for textile production requires a revolutionary system approach that encompasses the choice of material and finishes being designed for recycling at the end of life, and in this context bio-based processes can help provide the means to maintain materials in a closed loop. This paper reviews established methods in mechanical and chemical recycling processes in closed-loop textile recycling of all fibre types, as well as bio-based processes that demonstrate open-loop textile recycling. Fermentation and enzymatic processes have been demonstrated for the production of all types of textiles, which in combination with enzymatic deconstruction of end of life cellulosic textiles could allow them to be recycled indefinitely. Within the context of the circular economy, bio-based processes could extend mechanical and chemical textile recycling mechanisms in the technical cycle, enabling greater circularity of textiles in the biological cycle before composting takes place. [Display omitted] • Closed-loop mechanical and technical recycling of textiles has been established. • Enzymatic processes can deconstruct all fibre types in open-loop textile recycling. • Biochemical processes can establish textiles circularity in the biological cycle. • Biotechnology can modify the concept of separate biological and technical cycles. [ABSTRACT FROM AUTHOR]

Formal scavenging grants material circularity, but its potential contribution to the sustainability of a Supply Chain (SC) is far from being a trivial issue. Thus, this paper aims to understand what is the impact of formal scavenging on the sustainability of an SC and quantify it. Accordingly, a case study in an Italian Pulp and Paper circular SC was developed through the lenses of the Triple Bottom Line. This SC consists of five groups of stakeholders and a formal scavenger that collects and redistributes wastepaper. The findings show that, in a one-year time window, the formal scavenger generated an economic value of over €3 million and led to saving 718 tCO 2 e and an energy equivalent to that consumed by 1000 average Italian families every year. In addition, it created new stable jobs and directly contributed to decreasing the waste tax in the geographical area in which it operates. Furthermore, formal scavenging proved to be effective in building up SC resilience in the face of unexpected changes in the prices and volumes of wastepaper. The results contribute to framing formal scavenging as a collaboration-based solution to enable the achievement of sustainability benefits in closed-loop SCs and provide actionable suggestions for SC managers and policymakers. [ABSTRACT FROM AUTHOR]

The industrial alkaline battery recycling process produces an organic fraction (OF) consisting of waste paper, plastic and cardboard. Currently, this OF is used for energy recovery, given the absence of a successful alternative recycling approach, attributed to its contamination and limited economic value. This study explored the valorisation of the organic fraction derived from the recycling of alkaline batteries as a foaming agent in the production of lightweight expanded clay aggregates (LECAs). The OF, was mixed with red stoneware atomized paste (RSAP) in varying proportions (5–30 wt%) and fired at temperatures between 1000 and 1200 °C. The volumetric expansion, density, and compressive strength of the resulting aggregates were determined via mineralogical and microstructural characterization. The results indicate the organic fraction's suitability as an expansion agent, particularly at 1200 °C with 5–15 wt% inclusion, showcasing density (0.65–0.75 g/cm3) and compressive strength (1.34–1.39 MPa) comparable to commercial expanded clays. The microstructural analysis revealed the formation of rounded pores, influenced by the firing temperature and OF content. A Life Cycle Assessment (LCA) compared the environmental impacts of this process with traditional LECA manufacturing, highlighting the potential environmental benefits of using recycled battery waste. This study marks the first incorporation of this battery waste residue into LECA manufacturing, providing valuable insights into its environmental implications and paving the way for sustainable waste management practices. [Display omitted] • Organic fraction of alkaline industrial battery recycling enhances clay expansion. • It is a viable additive for manufacturing lightweight expanded clay aggregates. • First-time inclusion of this type of residue in lightweight aggregates manufacturing. • Life Cycle Assessment shows light variations in most impact categories. • Notable enhancements in alkaline battery recycling efficiency could be achieved. [ABSTRACT FROM AUTHOR]

Upcycling agroindustry residues into new valuable products is a strategy for mitigating environmental impacts while increasing material circularity. In this study, two sizes of eggshell particles (D 90 = 7.1 μm (ESAJ) and D 90 = 16.3 μm (ESBU)) were obtained and their incorporation as fillers into biodegradable pectin/starch film was evaluated. The effect of the presence of eggshell particles (2–8 w/w%) on the structural and morphological aspects, water barrier, and mechanical, optical, and thermal properties of the biocomposites was evaluated and then the reinforced film was applied on the surface of kraft paper. The release of calcium in an acidic solution was inverse to the size and concentration of particles and the released íon may contribute to the crosslinking of pectin. The incorporation of only 2 % eggshell resulted in 42% lower solubility of the film. The eggshell-reinforced films proved to be more opaque and rigid. The addition of 6% ESAJ significantly improved the tensile strength (an increase of 32%), modulus of elasticity (an increase of 29.7%), and water vapor barrier (59% of improvement). DSC analysis suggests that the calcium from the eggshell interacts with the pectin polymeric structure, reducing the sites available for water molecules, which may have caused more mobility of the chains through the matrix. The reinforced pectin/starch film was very well adhered to the kraft paper in the application test by continuous casting, but the coated paper showed no improvement in oil and water resistance, which means that other coating processes need to be explored. • Eggshell was used as a reinforcing filler material in pectin/starch film. • Eggshell particles were well adhered to the matrix. • The eggshell powder had improved the water resistance of the pectin/starch film. • The addition of 6% eggshell had increased the film's tensile strength in 32%. [ABSTRACT FROM AUTHOR]

Large quantities of post-use glass packages are produced globally, that so need to be treated as waste: this is cause of a global environmental concern. Therefore, efforts are required for optimisation and promotion of re-use and recycling practices with a waste valorisation-oriented approach in a circular economy context. In this context, the study was aimed at documenting environmental damages and improvements related to recycling glass cullet into sodium silicate in water solution on a lab-scale chemical process. Life Cycle Assessment was applied for this purpose according to the specialised International Standards. The study highlighted that the environmental hotspots of the process stay in the production of electricity and of sodium hydroxide as both required for the chemical reaction development. Those two input items contribute 81.94% and 14.33% of the total damage associated with the whole lab process, that is equal to nearly 36.5 μpt. A 64% environmental damage reduction could be obtained by sourcing the process electricity requirements by means of a photovoltaic plant. Furthermore, through a sensitivity analysis, the authors proved that the investigated sodium silicate is appreciably more environmentally sustainable than the virgin-origin counterpart, whose environmental profile was measured in nearly 43 μpt. The study can be considered as a proof that, already in the design phase on a lab-scale dimension, it is possible to identify recycling paths that may contribute to implementing sustainable circular models of the economy. [Display omitted] • The paper investigates the recycling of post-use glass containers into sodium silicate. • Life Cycle Assessment was applied to a chemical process on the laboratory scale. • The functional unit was 41g sodium silicate. • Electricity consumption and sodium hydroxide production were the environmental hotspots. • Recycled sodium silicate was environmentally proven than the virgin counterpart. [ABSTRACT FROM AUTHOR]

The production of CaO for lime-based plaster and render generates 1.2 t CO 2 /t CaO, consumes 1.78 t CaCO 3 /t CaO. This research paper examines the environmental and economic performance of upcycling paper mill sludge (PMS) and carbide lime (CL) as replacements for hydrated lime (HL) in lime-based plasters production. For this, a new Cradle-to-Gate industrial-scale inventory is designed, upscaling recent lab-scale innovations, investigating PMS and CL treatment processes, followed by a Cradle-to-Grave scenario analysis. The results show that incorporating CL in the plaster yields better environmental and economic outcomes compared to PMS. The intermediate treatment for CL is cost-effective and has low carbon emissions. The upcycling of CL eliminates 100% of CO 2 emissions, while PMS reduces emissions by 11%. The production of the traditional binder HL is more expensive than upcycling PMS (+69%) and CL (+65%), with carbon taxes accounting for 35%, 44% and 15% of production costs, respectively. The effect of an equilibrated carbon price to ensure fair market competition, considering the natural carbonation of lime (carbon credit) is discussed, and the cost assessment reveals a 47% and 54% reduction for upcycled plasters using PMS and CL, respectively, compared to traditional HL. [Display omitted] • Availability, properties, and treatments of secondary lime resources. • Industrial-scale inventory for upcycling carbide lime (CL) & paper sludge (PS). • Cradle-to-Grave assessment: CL reduces CO 2 most, trailed by PS and hydrated lime. • Key factors for Cradle-to-Grave impact: lime kiln heat consumption (PS) and drying operation (CL). • Cost analysis of carbon taxes and credits across the material's life-cycle. [ABSTRACT FROM AUTHOR]

Notwithstanding a growing scholarly interest in stakeholder governance, the issue of how stakeholder governance can motivate a firm's stakeholders to cooperate to the transition to circular economy (CE) is still underdeveloped. This study intends to contribute to advance knowledge in this field by investigating the comparative effectiveness of three stakeholder governance forms – hub-and-spoke, lead role, and shared governance – to motivate stakeholders of a focal company (FC) to cooperate to the development and implementation of circular business models. Drawing on three case studies of Italian companies engaged in the transition to CE, we propose a contingent model of CE stakeholder governance. We found that the most effective stakeholder governance form at FC level depends on CE boundaries, the attitude of market forces to incentivise stakeholder cooperation to the CE, and the owners' identity of the FC. We also found that a FC can adopt different stakeholder governance forms for the diverse CE-enhancing projects it has undertaken, appropriately tailoring the governance arrangements to the nature of activities of each project and to the value, uniqueness, and complementarities of the resources held by the stakeholders involved. This papers makes both theoretical and practical contributions. From a theoretical point of view, it advances knowledge at the intersection of stakeholder theory and governance of the CE in two main ways: first, by pointing out that the transition to the CE requires a shift from a perspective of a company responsibility to its stakeholders to that of stakeholders' responsibility to a company, a supply chain or a local community they belong to. Second, by proposing some conditions under which shared forms of stakeholder governance are likely to foster this transition. From a pratical perspective, this paper suggests how stakeholder governance can be a tool to achieve CE targets at local community, industry, supply chain or individual firm level. [ABSTRACT FROM AUTHOR]

An increasing number of electric vehicle batteries will reach the end of their life cycle with the fast growth of electric vehicles. Since the recycling of retired electric vehicles batteries is of great significance in the light of resource utilization, ecological protection, energy saving and economic benefits, the proper management of electric vehicle battery recycling (EVBR) is crucial for achieving sustainable development. However, due to the involvement of multiple stakeholders, there are many potential barriers in the process of EVBR, and analyzing these barriers can significantly help the recycling management of waste electric vehicle batteries towards a circular economy. Although the literature has focused on analyzing obstacles to implementing reverse logistics for electric vehicle lithium battery recycling from a manufacturer's perspective, less attention has been paid to analyzing barriers to EVBR from a multi-stakeholder perspective. This paper thus aims to investigate the barriers to EVBR from a multi-stakeholder point of view, identify the main barriers affecting battery recycling, and analyze the interrelationships and hierarchies between these barriers. Based on expert opinions and literature reviews, this paper identifies twenty major barriers to EVBR and uses interpretive structural modelling (ISM) method to determine the interrelationships and hierarchies between the barriers, and finally classifies the barriers to EVBR into a seven-level structural model. Furthermore, matriced impacts corises-multiplcation appliance classement (MICMAC) analysis is applied to categorize the identified barriers to EVBR, and the twenty barriers are finally classified into three categories, namely dependent barriers, linkage barriers, and driver barriers. This paper discusses theoretical insights, managerial and practical implications, and measures to overcome EVBR barriers based on the results, which show that the lack of more appropriate incentives is a major barrier to EVBR implementation. This paper provides a solid theoretical foundation for the further development of battery recycling policies, and will also help relevant stakeholders and governments to better understand these barriers and adopt effective approaches to address them. [Display omitted] • This paper studies the barriers to electric vehicle battery recycling. • A hierarchy of potential electric vehicle battery recycling barriers is identified. • Measures to overcome the barriers to electric vehicle battery recycling are given. • Several key theoretical implications and managerial insights are provided. [ABSTRACT FROM AUTHOR]

The use of production by-products as feedstock offers benefits in terms of circularity, waste reduction, and enhanced local value-add. In this paper, we examine the institutional and supply network collaborations required to shift from global to near-sourcing using by-products of previously unrelated production activities. The case study of straw stubble agri-waste is examined as it exhibits multiple product-process valorisation opportunities, generates social welfare gains for farmers, and addresses a critical societal need of reducing pollution. Drawing on circular economy and supply network configuration literature, the research involved the consideration of local resource availability, product-production process technology options, partnering arrangements, and network governance. The results reveal multiple feedstock product-process conversion scenarios, each representing potential intermediate and end-use products/markets. Two pathways were identified offering industrial-scale valorisation, namely straw-stubble as a feedstock for i) building products and ii) energy purposes. Circular supply network design parameters emerge from cross-case analysis suggesting alignment across feedstock network structure, product-processing pathways, and the configuration of public-private partnerships is necessary. This paper develops supply network configuration design approaches and related partnering models by providing a structured framework for identifying commerically viable by-product driven supply networks that leverage the proximity of non-traditional suppliers exploiting local resources. This research contributes to the design of circular supply networks and partnership configurations for the valorisation of by-products. [ABSTRACT FROM AUTHOR]

Born circular startups play a pivotal role in implementing high-level circularity to fight resource depletion and address climate change. In developing circular business model innovation, circular startups face the challenge of lacking legitimacy, which can be approached by certifications provided by concepts like Cradle-to-Cradle. As there is currently no supporting tool to develop such business models, this paper employs a design science research approach and proposes a Cradle-to-Cradle (C2C) Business Model Tool. The tool is developed based on a literature review, feedback from 42 users in six demonstration workshops and is finally tested with eight startups. It succeeds in aiding born circular startups in navigating the venturing process with a focus on high-level circularity. In this paper, C2C principles developed for the product level are theoretically linked to the business model level. The tool addresses elements such as partnerships, communication, and action-taking, thereby contributing to the literature on circular business model innovation and serving as a practical resource for born circular startups. [Display omitted] • Circular startups face great challenges when innovating for circular business models. • Cradle-to-Cradle principles can enable high level circularity in business models. • Cradle-to-Cradle as a product level concept can be integrated in business models. • Proposed business model tool can support startups with Cradle-to-Cradle innovation. • Design science research contributes to bridging design-implementation gap. [ABSTRACT FROM AUTHOR]

The textile industry's resource use, waste, and emissions have led to severe scrutiny, worsened by fast fashion's rise, making clothing disposable. The circular economy (CE) offers a solution to address these issues but achieving circular fashion requires systemic and comprehensive stakeholder engagement across the value chain. Current research often overlooks wider stakeholders beyond internal company members, neglecting calls to incorporate a systems perspective in CE transitions. Moreover, the potential of stakeholder engagement for social learning, where stakeholders mutually share and acquire knowledge, remains largely untapped. To this end, this paper provides a systematic methodology of stakeholder engagement based on an empirical setting of transition towards CE in fashion textiles in London. It entails identifying contexts, aligning stakeholders' actions, negotiating interventions, and communicating insights effectively. Based on the learnings from an empirical stakeholder engagement process, findings suggest a lack of alignment in the understanding of the CE concept across actors, that is underpinned by a fragmented knowledge of the overall value chain, often leading to also fragmented siloed policy approaches. While this paper uses fashion textiles as an illustrative case study, the process-led framework is largely applicable across different areas of the CE transition. • Stakeholder engagement fosters social learning in circular transitions. • The fashion industry lacks alignment on circularity interventions across the value chain. • Actors in fashion lack a cohesive understanding of the value chain. • Circular fashion requires design, business models, and behaviour changes. • The stakeholder engagement framework applies to circular economy transitions in general. [ABSTRACT FROM AUTHOR]

Straw pulping plays a vital role in virgin pulp supply and regional agricultural residue utilization. However, a significant decrease in its production has been observed. From an environmental perspective, why has there been a sharp decrease in straw pulping? Are there any innovations in straw pulp production that alleviate the heavy environmental burdens of straw pulping? In this study, factors contributing to the decrease in straw pulp are examined. An innovative technique to produce straw pulp is introduced and its environmental performance is analyzed and compared with conventional pulping. The results show that the main reasons contributing to the environmental burdens of straw pulping lie in the difficulties in black liquor extraction and alkaline recovery for the black liquor. Technical processes are changed in the innovative technique of straw pulping through using a rapid displacement cooking process, converting black liquor into fertilizers, utilizing total chlorine-free bleaching, etc. The new technique (Case B) achieves superior environmental performance than that of the conventional technique (Case A) from a carbon metabolism perspective. Specifically, 1022.90 kg and 857.80 kg of biogenic-carbon (bio-carbon), and 594.32 kg and 628.13 kg of fossil-carbon are needed to make 1 ton of bleached straw pulp for Case A and Case B, respectively. The carbon efficiencies for Case A, Case B (when pulp is the only desired product) and Case B (when including other products) are 39.10%, 46.63% and 92.21%, respectively. The carbon factors for Case A, Case B (when pulp is the only desired product) and Case B (when including other products) are 3.66, 3.60 and 1.86 kg CO 2 -eq, respectively. In addition, the corresponding E factors, which reflect the waste generation level, are 3.20, 2.69, and 1.39 kg, respectively. The new technique for straw pulping, which follows the principle of a circular economy by fully utilizing resources and reducing the generation of waste, achieves both economic and environmental benefits. It is a promising technique for straw pulping. [ABSTRACT FROM AUTHOR]

Despite the transition towards a circular economy (CE) being a significant element in achieving the decarbonisation of the built environment, a clear and common pathway to applying CE principles to building design is still lacking in both industry practice and academia. The integration of Building Information Modelling (BIM) and Life Cycle Assessment (LCA) has the potential to enable the identification of feasible pathways to increase circularity. This study aims to investigate its practical use to facilitate the application of circular economy principles at the early stage of building design via using LCA-based BIM plugins. Within this aim, the paper centres on a co-production approach and presents a gap analysis by identifying gaps in knowledge and implementation as well as addressing the pressing needs of the current practice in the UK. A series of semi-structured interviews with expert practitioners in the field were conducted for data collection, contributing to the following phases of the co-production by allowing for an in-depth investigation and reflection of the practice. The findings have revealed that: (a) there is still an insufficient level of contextual awareness and readiness in the implementation of CE principles in the built environment and LCA understanding and (b) the adoption of BIM at the early stages of building design is still limited in the current practice; BIM models with sufficient level of data details and quality to enable circularity assessment are rarely produced. Thus, the paper highlights the need for enabling mechanisms, including the introduction of legislative instruments, the involvement and commitment of the industry and key stakeholders, the support for training and skills improvement, and the establishment of effective communication and implementation process management frameworks. Future research agenda points to the need of formulation of a BIM protocol to enable integration of BIM and LCA to promote CE principles in the building design process. [Display omitted] • Co-production is a promising approach to capture and respond to the industry needs. • Lack of seamless integration between BIM and LCA tools. • Insufficient understanding of how to apply CE principles in the building design. • Lack of systematic guidance and standardised process to implement BIM and LCA integration. • A tailored BIM protocol needed for applying LCA from a CE perspective in the building design. [ABSTRACT FROM AUTHOR]

This paper describes the role of Design Thinking (DT) in the context of sustainable development (SD), based on a perceived research need to identify the features which may characterise its deployment, and identify ways via which it may be optimised, especially in the implementation of the United Nations Sustainable Development Goals (UN SDGs). The main goal of this study is to examine the connection between DT and SD and showcase examples of what has been done to deploy it, using real-case situations. From a methodological perspective, the paper deploys a set of two methods: bibliometric analysis and case studies. Among other findings, the paper shows that DT can be used to help implement the UN SDGs by providing an approach that emphasizes human-centered design. This includes identifying problems, creating user-friendly solutions, and testing them in order to ensure that they are effective. Also, by using DT, companies, organisations, and governments can create low-cost, high-impact, and sustainable solutions to help achieve SDGs such as SDG8, SDG9, SDG12, and SDG13, among others. Overall, DT provides a framework for combining creative and analytical reasoning, specific mindsets, and diverse hands-on tools and techniques to improve critical thinking abilities towards sustainability challenges. The novelty of the paper relies on the fact that the combined use of the two methods allowed the identification of some useful features of DT, which may facilitate its deployment in sustainability contexts. This may assist future studies since it provides a theoretical basis for the field. • Research gaps in DT prevent its widespread use in SD. • The paper deploys bibliometric analysis and case studies. • DT within a circular economy is an emerging approach. • DT may foster sustainability practices. • A novelty is the identification of pathways to optimise DT in SD. [ABSTRACT FROM AUTHOR]

The purpose of this research is to show how taxation of intermediate items produced from virgin and recycled materials negatively impacts closed-loop supply chain (CLSC) results (labor, capital, returns, outputs, prices, profits, and dead-weight-loss). It offers remedies to alleviate tax inefficiencies. After formulating upstream and downstream production functions and recycling process, a Stackelberg game framework is analytically solved and data from steel industry and automobile stimulus program in the US are used to obtain numerical results. The results show that an optimum collection channel along with endogenous consumer return behavior can improve outcomes and reduce inefficiencies stemming from output taxation. The principal policy implication is that American, Chinese, Canadian, and German governments' tax incentive programs applied to items produced from recyclables are a sound strategy in the way of spurring their circular economies, improving environmental sustainability, and reducing economic loss. [Display omitted] • Legislators aim to reduce environmental impact of used products and propel sustainable business. • However, governments interventions can distort circular economy outcomes. • This paper proposes remedies to reduce economic and environmental distortions. • The remedies include optimal collection channel and incentive-responsive return program. • The paper quantifies the outcomes in the steel industry. [ABSTRACT FROM AUTHOR]

Circular economy (CE) adoption is spreading worldwide, and it aims at decoupling the creation of value from resource consumption, leading to sustainable and responsible production and consumption as highlighted in the Sustainable Development Goal 12. The circular transition will ask for the transformation of the companies and the workforce, from both qualitative and quantitative perspectives. The set of required skills will be influenced by the circular transition, while the degree of implementation of circular activities will depend on the availability of adequate skills. Nevertheless, the extant literature has not reached a consensus on which competences are required for a circular transition, and few studies have approached this topic at all. This paper presents a systematic literature review to identify and categorize the skills that can facilitate the adoption of circular practices in manufacturing companies. The identified skills were systematically organized within a structured framework extending Porter's Value Chain. Leveraging the literature review's findings, the paper proposes a series of ideal job profiles for circular manufacturing, and it outlines some preliminary education and training paths. This research contributes to the current body of literature and practical understanding on the "human dimension" of circular manufacturing. [Display omitted] • Systematic literature review on skills required for circular manufacturing. • Skill classification based on circular manufacturing value-added activities. • Ideal job profiles modelled on the most relevant skills mentioned in literature. [ABSTRACT FROM AUTHOR]

The textile and clothing industry is a significant global sector due to its economic and social contributions. However, it is one of the most polluting industries. There has been a significant uptake of research on circular economy implementation to reduce its environmental impacts. Nevertheless, there is a critical gap in reviewing how the research field is evolving and what the core focus and underlying assumptions of the existing research are. This paper utilises bibliometrics, content analysis, and problematisation to comprehensively examine the state of research. Analysing 132 primary documents dating from January 2014 to April 2023, this study reveals that sustainability-oriented innovation and transition challenges are the core focus of existing research. Technology-oriented circularity and its positive impact on sustainability is the in-house assumption that almost all studies are founded on. Besides unpacking the risk of such assumptions, this study provides tangible suggestions for future research on circular economy disruption, its rebound effect, and sustainability-oriented innovation. Although the time lag and language biases may have impacted the representation of current research trends, findings from this study can facilitate academic research and industry practice in implementing circular economy practices for a more sustainable future. • There is a significant uptake of research on CE implementation, its positive effects, challenges, and opportunities. • This paper utilises bibliometrics, content analysis, and problematisation to examine the research on CE in the TC industry. • Institutional factors, consumer behaviours, sustainability-oriented innovation and transition challenges are critical for CE. • The disruptive and rebound effect of CE, institutional isomorphism and innovation capability are future research directions. [ABSTRACT FROM AUTHOR]

The transition to a circular economy can be undermined by rebound effects, which could mean secondary production does not fully displace virgin raw materials. So called 'circular economy rebound' is under examined in the academic literature and thus requires greater attention if it is to be successfully estimated and mitigated by decision and policy makers. Accordingly, this paper undertakes a systematic review of the methods that have been deployed to measure rebound effects of all types and identifies those quantitative tools that have yet to be utilised in the nascent area of circular economy rebound but which could have application in this context. In so doing, the paper also reflects on the data needs of different methods, as well as the magnitude of the different rebounds identified and potential mitigating strategies. Findings suggest clear research gaps within the rebound literature and identify areas in which estimation of the circular economy rebound specifically could benefit from this wider body of work on rebound assessment. • Circular economy rebound is underexamined in the academic literature. • A review of applied methods for estimating rebound effects is conducted. • Methods that could be used to estimate circular economy rebound are identified. • Data needs, rebound effect sizes and mitigation options are discussed/classified. • Major gaps in the rebound effect literature are synthesised in a research agenda. [ABSTRACT FROM AUTHOR]

This paper identifies the Circular Value Chain Blind Spot in consumer behavior research on Waste of Electrical and Electronic Equipment (WEEE). A scoping review was conducted to ascertain the current state of research regarding consumer behavior in handling WEEE concerning circular or transformational and linear behaviors. By evaluating 122 articles from databases including Scopus, Web of Science (WoS), and ProQuest the findings reveal a notable focus on three key strategies among the 9 R framework: recycle, repair, and reuse. Recycling emerges as the predominant area of research, while circular transformation strategies and linear concepts are also explored. Unexpectedly, concrete consumer action strategies are underrepresented, with a primary emphasis on companies and governments. As consumers are recognized as crucial actors within the circular economy (CE), this paper terms this contradictory state as the Circular Value Chain Blind Spot. Addressing future research, the paper concludes with a comprehensive research agenda encompassing six key areas: nudging, differentiation, systemic perspective, waste hierarchy, value chain strategies, and cultural factors. By adopting this research agenda, we anticipate overcoming the Circular Value Chain Blind Spot and fostering equal consideration of all stakeholders involved in the WEEE problematic. • Circular consumer behavior in the field of e-waste is scarcely researched. • Limited research focusses on recycling and linear behaviors. • Scoping review as a suitable method for uncovering research gaps. • Identification of the Circular Value Chain Blind Spot. [ABSTRACT FROM AUTHOR]

Circular Economy (CE) is a promising solution for a wide range of stakeholders, including companies, governments, and society at large to confront serious environmental concerns (Crome et al., 2023) to address resource depletion, environmental degradation, and waste generation. As Cambodia's economy heavily relies on resource extraction and export-oriented industries (e.g., textile industry and agriculture contributing significantly to GDP), it generates substantial waste (fundamentally, Municipal Solid Waste (MSW), but also industrial, construction and demolition waste (UNDP, 2022a,b)), and pollution. To tackle such issues, the government has recently demonstrated a stronger commitment to sustainable development by integrating CE principles into a national policy. First, this paper explores the current environmental issues of the country. Secondly, it assessed the country's CE Strategy and Action Plan. Thirdly, as a primary finding, it was discussed the potential barriers, international collaboration prospects, and implementation recommendations to catalyze challenges into opportunities, covering the gaps observed in the country's CE Strategy and Action Plan, and following prominent CE trends. Lastly, it concludes that despite the hurdles, CE has the potential in the country to provide socio-economic benefits, including job creation, resilience, reduced reliance on imports, and improved public health. This paper consisting of policy analysis combined with a bibliographical review presumably represents the first work on this topic; it will be useful for foreign investors, academia, and policymakers. • A contemporary analysis of the most noteworthy environmental issues in Cambodia. • Policy adoption assessment of Cambodia's Circular Economy Strategy and Action Plan. • Discussion with barriers, international opportunities, and recommendations. [ABSTRACT FROM AUTHOR]

Higher education institutions (HEIs) can play a key role in the transition to the circular economy (CE) given their missions, characteristics and role in shaping the coming generations of citizens and leaders. The aim of this paper is to provide a comprehensive examination of HEIs as microcosms for transitioning to circular models. Through a semi-systematic literature review, it focuses on the systemic transformation of HEIs and uses quantitative and qualitative content analysis to map 72 research papers covering the topic. The paper also introduces a methodological approach to address the complex nature of HEIs as intricate systems. The analysis reveals the presence of six main themes relevant to CE implementation in HEIs: education and research; campus physical facilities; tools and activities for greening the campus; material flows and waste management; collaboration, stakeholder engagement and behaviours; and frameworks for CE implementation. The analysis showed a growing interest in CE implementation in HEIs and evidence of the potential of HEIs to foster the transition towards it. However, an organized approach is currently lacking as is an understanding of how to apply CE practices within HEI systems. Recommendations for future research include comparing academic research findings with grey literature from HEI networks and other credible organizations. [ABSTRACT FROM AUTHOR]

This paper aims to explore the institutional logic of manufacturing companies in the transition to a sustainable and circular economy. The paper follows abductive reasoning and uses a qualitative methodology encompassing primary data collected from 16 interviews with manufacturing companies and supplementary data from web-scan analysis, observation and 15 interviews with public institutions and environmental experts. We identify four specific co-existing logics of the circular economy of manufacturing companies and explain operating conditions of each logic. Compliance and commercial logics reflect instrumental thinking, while value chain and value creation logics are more based on integrative thinking. To illustrate opposites of instrumental thinking and integrative thinking, we propose an analytical framework of circular logics, that consists of three pillars, that is homogeneity vs heterogeneity, techno-centric vs system-centric perspectives, compliance vs ethical responsibility. The originality also relates to the prioritization among different logics. • Four CE logics of manufacturing companies discovered. • Compliance and commercial logics reflect instrumental thinking, value chain and value creation logics are more based on integrative thinking. • We propose an analytical framework of CE logics that consists of three pillars. • Based on attributions of negative and positive factors, managers actually can prioritize integrative CE logics. [ABSTRACT FROM AUTHOR]

Since the beginning of the COVID-19 outbreak, understanding its impacts on cities has received much attention in science and policy circles. This paper systematically reviews the literature on the interface of the pandemic and urban sustainability. The objective is to portray the impacts brought by the COVID-19 outbreak in urban environments within the sustainability framework and to detect trends and challenges for future research. The paper follows a methodology that integrates both bibliometric and systematic review approaches. The first approach relies on bibliometric analysis to provide an overview of the landscape of main trends on this nexus. The second approach presents a content analysis that deepens the work by outlining the impacts of the pandemic and the challenges that emerged on five different key topics for urban sustainability. The role of resilient urban planning is discussed as an integrative concept to face diverse challenges in the construction of sustainable cities in a post-pandemic scenario. Likewise, the study deliberates on future research topics related to resilient urban planning, social equity, healthy urban environments, sustainable mobility, and circular economy. This review serves as a guide for researchers and urban planners to understand emerging challenges and future research trends in urban sustainability. [Display omitted] • A literature review integrating bibliometric and contents analysis synthesizes the effects of the COVID-19 on the urban sustainability. • The impacts are sorted into thematic areas: resilient urban planning, healthy urban environments, social equity, sustainable mobility, and circular economy. • Challenges for urban sustainability and resilience are proposed as topics for future research work. [ABSTRACT FROM AUTHOR]

In today's competitive world, gathering precise context knowledge is a critical barrier for industry practitioners, professionals, and researchers in supply chain management, impeding their capacity to acquire expertise and give effective management awareness. In this regard, this study aimed to identify the data-driven capabilities of supply chain management. Realising the abovementioned issues, the existing literature on supply chain management needs to be further reviewed to explore the data-driven capabilities for sustainable supply chains. The study presented a systematic literature review on a data-driven sustainable supply chain to achieve this goal. One hundred ninety-seven documents from various publications were identified for bibliometric and network analysis from the Scopus database using specific keywords related to the research concept published during 2013–2023 through inclusion and exclusion criteria. The emerging themes were identified using the "R" package and reviewed the papers were reviewed in theme directions. The study showed that implementing data-driven and sustainable technologies could assist strategic decision-making. Also, Data-driven solutions can effectively improve sustainability in supply chain network operations performance. The study demonstrates that big data can contribute to achieving sustainability goals through bibliometric analysis and critique of previous papers published in the specialised field. [ABSTRACT FROM AUTHOR]

The paper explores the alignment and misalignment of objectives within private companies and public organizations in their approach to the circular economy. While many studies have investigated the alignment within single actor types, this research reveals the dynamics of alignment when private companies and public organizations engage. Drawing upon qualitative research protocol, our study employs a circular economy financing initiative implemented in Italy as the empirical foundation for investigating these dynamics. The results highlight the positive repercussions when private companies and public organizations achieve perfect alignment, which triggers internal transformations within both entities. However, perfect alignment is seldom achieved. Our findings thus contribute to the literature by proposing actor misalignment as a potential barrier to the circular economy. This paper provides both theoretical and managerial insights into alignment dynamics within the context of the circular economy and offers a perspective on how these dynamics might evolve over time in multi-stakeholder circular economy initiatives. • Positive repercussions when private businesses and public actors achieve perfect alignment. • Perfect alignment between private businesses and public actors is seldom realized. • Actor misalignment represent a potential barrier to the circular economy. [ABSTRACT FROM AUTHOR]

This study aims to synthesize the extant literature on supply chain (SC) resilience and draw a roadmap for resilient SCs by employing a systematic literature review (SLR). The paper utilizes an SLR methodology to draw upon important themes and sub-themes. This is based on a pool of papers published in peer-reviewed journals. Major themes identified included SC networks and structures, Industry 4.0 and digitalization, innovation and entrepreneurship, capabilities and strategies, SC risk management, circular economy and sustainability. SC networks and structures, as well as the role of information technology and Industry 4.0, are an important theme of research in the literature. The literature at this juncture has mainly highlighted the role of big data analytics, blockchain technology, and artificial intelligence in SC resilience. In addition, the important capabilities highlighted by researchers include SC flexibility, SC capacity, SC robustness, SC relationship management and SC leadership for improving SC resilience. The important themes and sub-themes identified in the study would help identify the strategic fields of action for creating resilient SCs. Particularly, the conceptualization of resilience within the SCs would help to uncover the factors that play an important role in improving the SCs. Further, the study also focuses on the interplay between sustainability and resilience. The present study will help managers to understand the factors that affect resilience in SCs. [ABSTRACT FROM AUTHOR]

In recent years, Glass Fibre-Reinforced Polymers (GFRPs) have shown positive characteristics in terms of both environmental and structural performance, thus proving to be promising materials that can be used in construction to replace traditional materials, such as steel. Regarding environmental performance, the use of GFRP instead of steel can lead to a significant reduction in energy consumption and CO 2 emissions, thus containing the environmental impact during their life cycle and contributing to the energy transition. From a structural point of view, the high corrosion resistance and durability of GFRP structures minimise maintenance requirements and greatly extend their lifespan, which can even be considered unlimited, even in terms of reusability. This paper jointly evaluates for the first time the structural performance and economic viability of industrial constructions made from GFRP pultruded profiles. These performances are then compared with that of equivalent steel constructions. This is done through a standardised and exportable model based on life cycle cost (LCC) which is developed in four phases: (1) technical-mechanical properties and structural analysis of the buildings; (2) modelling and cost estimation; (3) evaluation of the LCC indicator; (4) performance comparison of design alternatives. The elaborations show that industrial GFRP structures, while having a higher investment cost than equivalent steel constructions, can guarantee lower maintenance costs in the long run. Interesting quantitative results are: (i) the construction cost of the GFRP structure exceeds that of the steel structure by about 15%; (ii) maintenance costs are much higher in the steel structure than in the GFRP structure, due to the greater susceptibility to corrosion of structural steel; (iii) in relation to its very high durability, the residual value of GFRP structures coincides with the construction cost, while the residual value of steel structures decreases significantly; (iv) the composite structure has a Global Cost less than 26% of that of the steel structure, being the most economically advantageous alternative considering the costs related to the whole life cycle, also confirming itself as a fairer and more accessible alternative. The proposed Life Cycle Cost-based model can find multiple applications in the field of civil engineering as a valid support for the selection between alternative structural materials, useful for the transition to a more circular, just, and sustainable construction industry. [Display omitted] [ABSTRACT FROM AUTHOR]

One challenge that product design has faced is the ongoing threat of obsolescence, where investment in an updated solution can quickly become irrelevant within months or years as technology advances. This phenomenon not only affects consumers, who may find themselves with quickly outdated devices but also poses a dilemma for designers and manufacturers who must balance constant innovation with sustainability and product durability. In this dynamic scenario, there arises a critical need to understand how design attributes impact obsolescence and how this relationship can influence the creation of more sustainable and resilient products. This paper develops a taxonomy of product design attributes influencing different types of obsolescence to address the research gap between product design and obsolescence. It investigates the significance of obsolescence types across product categories, the impact of design attributes on these obsolescences, and the role of design in product sustainability. Employing a theoretical framework combining product design and lifecycle analysis, the methodology includes a literature review and an expert survey to evaluate design attributes against obsolescence types. From the literature review, 21 design attributes were identified and evaluated by 26 industry and academia experts. The findings reveal distinct patterns of obsolescence in various product categories, emphasizing the influence of specific design attributes. The role of attributes such as upgradeability and compatibility in technological, functional, and planned obsolescence was highlighted. Limited familiarity with certain types of obsolescence among experts was acknowledged, underscoring the importance of raising awareness within the design community. These insights are critical to align product design with sustainability goals and challenging traditional product development practices. The study has significant implications for designers, manufacturers, and policymakers, highlighting the importance of understanding design choices in reducing obsolescence and promoting sustainable consumption. • Obsolescence and product design are formally decoupled in the literature. • Product obsolescence is related to several early design attributes. • Design attributes are identified and validated through expert-surveys. • A taxonomy of product design attributes related to obsolescence is proposed. • Design attributes properly addressed can mitigate obsolescence. [ABSTRACT FROM AUTHOR]

Insulation materials in the construction industry play a crucial role in improving the thermal performance of buildings, reducing energy demands, and reducing carbon emissions. With the growing emphasis on decarbonization, the construction sector is increasingly adopting bio-based insulation materials from renewable and eco-friendly sources as a more sustainable circular economy (CE) strategy to replace mineral and plastic insulation materials. However, due to limited environmental data availability, their efficacy and environmental sustainability in climate mitigation relative to their conventional counterparts remain unclear. This study fills this critical knowledge gap by conducting a literature review and mapping the key physical and environmental properties of bio-based insulation materials, thereby assessing their potential for climate mitigation. Specific definitions and criteria established in this study for biobased insulation materials facilitated the mapping of 174 emerging materials and products at the lab-scale. These include 39 distinct bio-based materials, either in their raw form or combined with 40 binders from various material groups such as minerals, polymers, biopolymers, and other innovative solutions. Most mapped products show favorable performance in cradle-to-gate embodied carbon (EC), benefiting from biomaterials' carbon storage. However, significant variations in physical and environmental properties among these products highlight areas for improvement, particularly in embodied energy (EE) and thermal conductivity compared to glass wool. This paper attempts, for the first time, a comprehensive categorization of these products based on three criteria: thermal performance, climate mitigation, and environmental sustainability, grounded in critical physical and environmental properties. Cellulose and straw bale emerge as competitive options for thermal performance and environmental sustainability in climate mitigation, with potential for scalable adoption. However, further research on the physical and environmental properties of bio-based insulation materials is crucial to improve their assessment and categorization, and consequent recommendation for broader adoption in sustainable construction practices. [Display omitted] • Developed standardized definitions for biobased insulation materials by composition. • Categorized and mapped 174 bio-based insulation materials for climate mitigation. • Varied physical and environmental properties on the material level are observed. • EC values of most bio-based insulation materials are comparable to glass wool. • Cellulose and straw bales are promising alternatives for climate mitigation. [ABSTRACT FROM AUTHOR]

An important presumed social impact of the circular economy (CE) is job-creation for vulnerable groups. This creates opportunities for Work Integration Social Enterprises (WISEs), which are established to organize economic activities for workers with a distance to the labour market. In this paper, we identify challenges, opportunities, and sustainability aspects for WISEs in the CE. We apply Computable General Equilibrium (CGE) model results and conduct 20 expert interviews, providing an empirical contribution to recent research agendas on the social impact of the CE and the role of WISEs in Circular Societies. Our results show that WISEs should not take job-creating opportunities of the CE for granted, most specifically in the business-to-business (B2B) markets they are active in. While WISEs conceive competitive advantages to perform core CE jobs, they need to develop organisational capabilities to convert this potential into high added value activities within regionally embedded circular value chains. When identifying conditions for sustainable growth paths, we reveal a strong interconnectedness between social, environmental, and economic dimensions. We recommend management professionals and policy makers to measure, validate, and communicate social and circularity outcomes and invest in partnerships along value chains and across policy domains. [ABSTRACT FROM AUTHOR]

Repair is a critical contributor towards a more sustainable circular economy by prolonging the lives of consumer products. However, compared with purchasing new products, consumers perceive repair as expensive and inconvenient. Consequently, repair demand is low. To overcome this problem and stimulate demand, public authorities have introduced financial incentives in the form of different funding schemes for electric and electronic products. Clearly the design of these schemes will affect how repair companies set repair prices and how this affects consumer demand for repair. However, at a micro-level, this relationship between repair funding and repair prices as well as demand has not been studied before. In this paper we analyze and compare two designs of a funding scheme for electric and electronic products as implemented in Austria. Using a stylized model, we show that while such schemes lead to increasing prices, they can indeed enhance demand and improve repair company profits. Moreover, we find that preferences of consumers and repair companies with respect to the design of the funding scheme may diverge. Thus, public authorities need to prioritize demand or supply side benefits of the funding scheme. • To stimulate repair different incentive schemes have been implemented in practice. • We analyze different designs of repair funding schemes based on a subsidy. • We find that a subsidy can increase demand and repair company profit simultaneously. • Subsidy design is critical for ensuring its efficiency. [ABSTRACT FROM AUTHOR]

The global construction sector consumes 40 billion tonnes of raw materials and is responsible for considerable CO 2 emissions. With growing awareness of its environmental impact, the construction sector is looking to transition from a linear economy "take-make-waste" scenario towards more circular economy principles. Lightweight exterior infill walls are built between floors of primary structural frames to provide building façades. The design of these components is usually based on the current linear economic model. While lightweight exterior infill walls are becoming increasingly common in building construction in the UK, no studies have investigated the potential environmental benefits of designing them with circularity in mind. This means there's a lack of research on both the carbon footprint of these walls and the potential environmental benefits of reusing them. Thus, this article assesses the significance of the carbon emissions from lightweight exterior infill walls and examines whether there is any carbon reduction when lightweight exterior infill walls are demounted from the building frames and reused. This paper first examines the construction process of lightweight exterior infill walls and explores the opportunity to demount and reuse them. Then, the environmental impacts of the lightweight exterior infill walls are analysed using a lifecycle assessment framework. Sensitivity and uncertainty analyses are also conducted. The results demonstrate that (i) the embodied carbon of the lightweight exterior infill walls over their lifecycle represents approximately 22% of the embodied carbon of the entire building, and (ii) the disassembly and reuse of infill walls can reduce a building's embodied carbon over its typical lifetime by about 6% compared to the linear scenario where the walls were not reused. [ABSTRACT FROM AUTHOR]

Recent technological developments make perovskite solar cells (PSCs) particularly suitable for building integrated photovoltaic (BIPV) applications on vertical building envelopes, but the relatively short lifespan of PSCs requires frequent replacement, thereby generating substantial waste. Careful consideration of circularity credentials of this novel technology is therefore essential prior to the extensive implementation of vertical PSCs in building envelopes. This paper provides a circular economy approach for the implementation of PSCs in vertical envelopes and assesses its economic feasibility by life cycle cost analysis in Europe. The process of recycling PSC is developed. The economic performance of PSC envelopes is provided and compared to that of the conventional rigid BIPV system. Uncertainty analysis and sensitivity analysis of economic indicators are then performed to identify the influential parameters. The findings indicate that the PSC envelope has a significant potential for circular BIPV components and that PSCs applied on vertical envelope are economically viable. • LCCA of vertical PSC envelopes with recycling strategy is analyzed in Europe. • Recycling strategy of PSC is explored before diffusion to overcome PSC's short lifespan. • PSC price is the most influential factor for the deviation of LCOE. • PSC envelope has potential to achieve profitability in most regions of Europe. [ABSTRACT FROM AUTHOR]

Under the promotion of sustainable development goals, cleaner production (CP) has become an important strategy for energy-intensive manufacturing industries to maintain their competitiveness. Studies have shown that the implementation of Industry 4.0 (I4.0) can effectively promote the CP process in manufacturing. However, existing studies often focus on specific scenarios, limiting a comprehensive assessment of the industry's overall status. This paper aims to provide a comprehensive overview of the main research areas of I4.0 and its key impacts on CP by employing systematic mapping studies. By reviewing 121 studies retrieved from the Web of Science, a hierarchical analysis framework centered on the product life cycle (PLC) has been introduced. This framework provides a holistic analysis of sustainable intelligent manufacturing, summarizing the application of I4.0 and its impact on CP across the PLC stages. The main findings reveal a growing focus on I4.0 and CP, with the manufacturing and maintenance stages of the PLC being primary research scenarios. Moreover, attention should be directed towards integrating clean technologies, bolstering industrial data security, fostering circular economy practices, and exploring emerging fields like Industry 5.0. Moreover, to better explain the impact of this study, management implications are also provided from the three dimensions of theory, practice, and policy. These viewpoints and conclusions are of great significance for guiding future research and practical applications. • A comprehensive review of Industry 4.0 and cleaner production is conducted. • Systematic mapping and bibliometric methods are employed. • A hierarchical framework based on product life cycle is proposed. • The current challenges and future prospects are discussed. • Management implications from theory, practice, and policy are provided. [ABSTRACT FROM AUTHOR]

In the face of climate change, the circular economy is attracting the attention of public authorities, international institutions, industry and academia. There is currently no consensus on its definition and it varies according to the sectors and actors. The objectives of this work are threefold: (i) to identify all the discourses and initiatives attributed to the circular economy in order to situate them according to whether they belong to weak or strong sustainability; (ii) to enhance the value of this information by centralizing it, and creating tools to facilitate its exploration and access; (iii) to analyze how these initiatives allow circular economy to address global sustainability. Questions regarding data sources and processing of this information were raised to facilitate the collection of relevant data. This work focuses on information published on social networks, in particular Twitter called X now. Several data processing techniques such as text mining, geocoding and knowledge graph generation are applied. Data visualization tools are used to show the distribution of the data on a spatial, thematic and temporal level. The results obtained confirm the over-representation of circular economy practices based on weak sustainability in developed countries, while circular economy initiatives based on strong sustainability are most common in the Global South. This paper provides evidence on the social contribution of circular economy, which is less addressed in the technocentric approach. [Display omitted] • Global circular economy initiatives are collected, analyzed and mapped. • Circular economy initiatives are classified as strong or weak sustainability. • Weak sustainability initiatives exist in Global North, strong ones in Global South. • The circular economy is reconciled with the social pillar of sustainability. • Circular Economy can be linked to theories of social and environmental justice. [ABSTRACT FROM AUTHOR]

This paper aims to investigate the supply chain and reverse channels of expanded polystyrene packaging connection in Brazil and their roles to discuss the main challenges towards circular economy. In order to achieve this goal, we propose a four-step method, anchored in the literature, technical visits, and interviews with experts in the expanded polystyrene (EPS) industry. First, the EPS supply chain was characterised and mapped, and secondly, the stakeholders and logistics activities in reverse channels were analysed. Third, the Brazilian legislation and chain structure was reviewed to obtain an understanding of how this can influence the activities developed in reverse channels. Fourth, with an analysis of the data collected before, the barriers to implement EPS reverse chain were presented. The main results establish that the EPS can complete one cycle of the circular economy, which is recycling, but products need to be separated and washed. The most significant waste generators are public and private institutions, residences, and retailers. Notable barriers to its recycling are a lack of understanding of the nature of expanded polystyrene recycling by Brazilian people, high transport cost due to material density, and the dispersion of post-consumer expanded polystyrene in several regions of the country linked with the small number of recycling facilities. Finally, this issue could be explored in industries and companies that require their managers to adopt strategies to improve reverse logistics in order to promote the circular economy. The companies' actions could facilitate a stronger circular supply chain since they could increase recycling efforts, reduce expanded polystyrene waste, and present new business models. The resulting generation of employment would contribute to the quality of life of contemporary society. The findings presented in the paper enable industries to identify and guide the most demanding significant steps and processes, and to shift the reverse chain and expanded polystyrene recycling to ensure that they operate more efficiently. • Reverse logistics as the first step towards circular supply chain. • The paper maps the expanded polystyrene packaging supply chain and its reverse logistics. • This paper presents the barriers that hinder the reverse logistics in Brazil. • The main challenges are related to the consumers and the recycling industries. [ABSTRACT FROM AUTHOR]

Policymakers are embracing the circular economy (CE) as a means of harmonizing environmental and economic interactions, including at the urban level. Whilst numerous studies cover CE practices, few papers cover how it is being implemented and how cities (hotspots of material consumption, waste generation and disconnected pollution) are transitioning from linear-like processing of materials to a cyclical form. This paper addresses (a) how is the CE being applied and driven at the city level, and (b) what are the emerging transitional barriers and limits of such strategies? It compares the case studies of Amsterdam, Utrecht and The Hague, especially as the Netherlands is considered a CE frontrunner. Utilising document analysis of key national and city level strategies and 67 interviews, we show that the key municipal instruments include public procurement, zoning laws, capacity building and knowledge exchange and these can mostly be applied to municipal purchases and the construction sector. Practitioners perceived the initial barriers as knowledge of suitable technologies and deployment opportunities, the low quality of waste streams in comparison to the low costs of high-quality virgin inputs, the difficulty in addressing these issues at the urban scale, and the linear mindset of relevant actors. We argue that core limitations for these strategies and city level circular transitions include the instrumental scope and capacity to influence value chains and businesses, in addition to an overt focus on end-of-pipe actions as opposed to reducing and reusing resources. This research suggests that multi-level policy integration is needed to alter value chains to enable a greater reduction in material inputs and changes in actor behaviour. • Cities are experimenting with circular economy (CE) activities in the construction sector because of its potential. • Cities can incentivize CE through e.g. public procurement, tendering, zoning and suasive. • Cities prioritise lower R-options (e.g. recycling) over higher ones (e.g. reduce). • Hard barriers include applying suitable technologies and the low cost of virgin materials. • Soft barriers include linear mindsets and the limited scope of municipal mandates. [ABSTRACT FROM AUTHOR]

In the circular economy (CE), the importance of the evaluation of costs, benefits, and externalities capturing the variables involved in a product's life cycle are gaining attention both in the literature and with practitioners. In many cases, costs are isolated across the various life cycle stages and addressed in fragmented ways. The literature indicates the importance of developing and implementing life cycle costing methods from the perspective of the product/material flow life cycle. Numerical application of the product structure-based integrated life cycle analysis (PSILA) with the externalities demonstrates how this method can assist in the management of circular businesses. Therefore, this paper aims to analyze the benefits of using aluminum packaging in the food sector by combining the life cycle costing (LCC) model and externalities in the CE. The results obtained through the LCC concept and externalities indicate an economic benefit and CO 2 reduction. This paper seeks to fill the research gap regarding expenditures and benefits for the analysis of production costs, environmental impacts, and externalities in an integrated manner. [ABSTRACT FROM AUTHOR]

A growing body of literature argues that an organization's management control needs to adapt as an organization changes business model or strategy for the management control to be consistent with the organization's objectives and strategies. Nevertheless, scepticism has been raised about the role of management controls in promoting sustainability or the circular economy within organizations. Based on the management control framework of Malmi and Brown (2008), this paper explores empirically how organizations work with the circular economy and how management control has adapted to the business model. The results show that the circular economy can be practiced in different ways and that the adaptation and application of the circular economy affects the whole management control package. The paper identifies the importance of cultural control and long-range planning for communicating circular values and spreading a culture based on circular principles. However, regardless of what circular strategies are used, circular work tends to steer attention to the early phases of the product life cycle. For management controls this means that action plans, cost accounting, and investment appraisals must reflect a higher level of detail and a longer time horizon. The paper highlights how this is associated with challenges for traditional management controls. • Circular work steer the attention to the early phases in the product life cycle. • CE demands a higher level of detail and longer time horizon of decisions. • Managers need to build both a strong CE-culture and improve their cybernetic controls. • A challenge is how cost accounting and investment appraisals can develop. [ABSTRACT FROM AUTHOR]

In the circular economy era, environmental sustainability is critical, and both green and non-green products with similar functions co-exist in practice. There is little doubt that these two types of products are competing and may substitute one another even though one is more environmental friendly than the other. In this paper, we build analytical models to explore the optimal advertising and pricing decisions for a green product in the presence of a non-green product substitute. We investigate both simultaneous and sequential pricing strategies under which there are three possible pricing scenarios, namely: 1) both prices of green and non-green products are determined simultaneously (Strategy IP), 2) the green product's price is decided first and then the non-green product's price is determined (Strategy GL), and 3) the non-green product's price is decided first and then the green product's price is determined (Strategy NL). We find that the sequential pricing strategy is more profitable than the simultaneous pricing strategy for both green and non-green supply chains. It is interesting to prove the existence of "second-mover advantage" in the pricing game. Moreover, we identify that if the green supply chain uses Strategy NL, it could achieve a better performance in profit and minimize the corresponding environmental impact. If the green supply chain is truly socially responsible, it should design a product with low substitutability, so that the environmental impact can be enhanced. Furthermore, our numerical results indicate that Strategy IP never performs the best in terms of consumer surplus and social welfare when the product substitution level is sufficiently high. Findings of this paper contribute to the literature on cleaner production systems in the circular economy era. [ABSTRACT FROM AUTHOR]

This paper builds on the following research questions: 1) How is circular economy imagined in the academic literature in support of sustainability transitions in European cities? 2) How do European cities imagine circular economy as a knowable object of governance? 3) How can the circular economy imaginary be an opportunity for socially inclusive and environmentally desirable urban transitions? We engaged in a three-fold research endeavour to address these questions. Firstly, we conducted an in-depth literature review, mapping the emergence and developments of the circular economy concept in time and space with a specific focus on urban studies. Secondly, we analysed documented translations of the circular economy imaginary in three European metropolitan cities (Amsterdam, Paris and London) to explore the discourses, institutions, representations and social identities underpinning their respective translations, and reflect on how they diverge from each other and how they have the potential to deliver sustainable outcomes. Thirdly, these results were used to outline a research agenda that explores the relationship between the political and the epistemic domain of existing urban translations of circular economy across scales and places, to support future empirical investigations of whether and how circular economy imaginaries can support transformative pathways for socially inclusive and environmentally desirable value creation in cities. In so doing, this paper fosters reflexivity for both theory and practice in order to better understand how theorisations and the application of circular economy could be advanced in support of urban sustainability transitions. [ABSTRACT FROM AUTHOR]

The UK is facing tremendous challenges in tackling food waste diversion from landfill. Whilst much effort has been made to prevent food waste, there is still a lack of attention and strategic approach in dealing with resource recovery and valorisation of food waste. This paper presents a systematic framework for sustainable organic waste management and valorisation in the UK through (i) review of current policy framework; (ii) analysis of resource recovery potential from food waste at national, community and organisational levels; (iii) proposition of alternative waste management strategies; and (iv) examination of challenges and opportunities with respect to economic, environment and social dimensions of sustainability of waste management strategies. The paper explores valorisation of source-segregated food waste and mixed waste from the supermarket and households into electricity and transportation fuels, through partially and completely decentralised configurations using anaerobic digestion and gasification technologies. This study demonstrates a potential for reducing the cost of electricity and greenhouse gas emissions of one supermarket store by 12% when adopting partially decentralised food waste anaerobic digestion strategy, and full substitution of fossil fuel based electricity with net surplus renewable electricity generation through complete decentralisation of mixed waste gasification. Therefore, a more integrated, circular and advanced technological approach in waste management should be undertaken as it can lead to a wider range of socio-economic and environmental advantages to the local community, highly essential in the UK. Image 1 • Valorisation of waste closer to the source promotes resource circularity. • A synergistic approach is robust in addressing challenges in waste management. • Technology and configuration determine the viability of valorisation strategies. • Decentralised waste management enhances community participation. • A supportive fiscal incentive scheme promotes uptake of waste valorisation. [ABSTRACT FROM AUTHOR]