Search

Research has revealed the existence of an energy-efficiency gap – the difference between optimal and actual energy end-use, suggesting that energy efficiency can be improved. Energy management (EnM) is a means for improving industrial energy efficiency. However, due to various barriers, the full potential of EnM is not realised. Several studies have addressed drivers and barriers to energy efficiency but few to EnM. This study aims to identify EnM practices, the most important perceived drivers and barriers for EnM, and relations among them in the energy-intensive Swedish pulp and paper industry (PPI), which has the longest experience internationally of practising EnM systems, and has worked according to the standards since 2004. Our results show that, altogether, the PPI works regularly and continuously with EnM, with a clear division of responsibilities. The highest maturity for EnM practices was for energy policy, followed by organization, investments, and performance measurement. The study also shows that communication between middle management and operations personnel has potential for improvement. The most important categories of drivers were economic, whereas for barriers they were organizational. Nevertheless, knowledge-related barriers and drivers were amongst the most important, suggesting that the absorptive capacity for energy issues could be improved. Image 1029 • Energy is managed continuously, with clear policies and responsibilities. • The main drivers are economical while main barriers are organizational. • Knowledge related barriers and drivers are amongst the next most important. • Employees' absorptive capacity for energy issues could be improved. • Link between energy policy and performance measurement could be improved. [ABSTRACT FROM AUTHOR]

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

Abstract Papermaking enterprises are currently under both environmental pressure and economic pressure for sustainable development in China. Thus, the efficiency, effectiveness, and benefits of resource utilization need to be improved. High-consumption and high-pollution companies should manufacture paper using sustainable methods. This study highlights a resource value flow analysis from the circular economy perspective, developing an extension of material flow cost accounting and modifying it by accounting for environmental damage as well as economic benefits. With reference to the Plan-Do-Check-Act cycle, this specific case study was conducted to verify the comprehensive utility of resource value flow analysis by establishing decision-making prioritization according to the dualistic diagnosis of "internal resource loss–external environmental damage costs." In general, applying a resource value flow analysis can both reduce resource consumption and minimize environmental damage, enhancing the sustainable development of a process industry with limited resources. Highlights • Material flows and value flows form an interactive unit in the resource value flow analysis model. • The resource value flow analysis model extends the environmental dimension of material flow cost accounting. • A dualistic diagnosis of "internal resource loss and external environmental damage costs" can achieve both economic profits and environmental benefits. • The Plan-Do-Check-Act cycle was introduced to strengthen the practical application of the resource value flow analysis. [ABSTRACT FROM AUTHOR]

China’s paper industry consumes a lot of energy and emits huge amounts of pollutions. The Chinese government over the past decades has done a lot to promote energy efficiency of the industry. This paper studies the impact of industrial polices to improve energy efficiency. The energy efficiency change is firstly studied under a framework of total factor efficiency. On this basis, different econometric models are built to discuss the detailed energy efficiency characteristics of the paper industry. The main results are as follow: (i) ownership structure did influence the energy efficiency, but the influence is different in different conditions; (ii) energy efficiency of the paper industry can be improved by economies of scale; (iii) market competition can to some extent overcome the motivation and supervision problem that often occur in state-owned companies; (iv) energy price cannot play the role of resource allocation well in China. Finally, based on our findings, some suggestions are provided. [ABSTRACT FROM AUTHOR]

In recent years, the pulp and paper industry has changed a lot and products have been constructed in quite different methods using new technologies. It can be due to the emergence of challenges and constraints such as shortage of raw materials, energy consumption (fossil fuels, electric, etc.), management of the resulting pollutants, environmental issues, ongoing legal requirements and cleaner production strategies. In Iran, the pulp and paper industry's technological development is not keeping pace with global growth. Iran's pulp and paper mills supply a small fraction of domestic market. The reasons can be due to old technologies being used in factories, aging machinery, low productivity of production systems and lack of coordination with modern technologies. It leads to low-quality of paper products and willingness to buy local products. The aim of this study is to select the most appropriate technologies in the pulp section, due to high impact of pulp quality on the quality of final paper. Using a 2-filterd fuzzy decision-making, hierarchical structure of research is designed to assess technological alternatives according to the selected criteria. Findings show that after passing through two filters, Kraft method was chosen as the most appropriate method. The Kraft process has still many advantages like the high quality of the produced pulp and self-sufficiency in energy supply. This framework offers an appropriate procedure for identifying and selecting technologies that has not been used in past researches. Using this framework facilitates using a clear procedure for evaluating and selecting technology and prevents future losses for organizations. [ABSTRACT FROM AUTHOR]

China's paper industry accounts for a larger proportion of the global paper industry and consumes large amounts of energy. Energy conservation and pollution reduction of the industry have become the focus of China's national development strategy. Energy efficiency is an important index which directly determines the amounts of energy consumption and pollution emissions. To understand the energy efficiency evolution of China's paper industry, this paper establishes an input-output data of the paper industry for 29 provinces in China and applies DEA method and econometric models to estimate and comprehensively discuss the energy efficiency issues based on the framework of total factor efficiency. Our results indicate that China's paper industry has a large energy saving potential even though its energy efficiency has improved during the period 1990–2013. The saving potential is about 65% under the meta-frontier and 44% under the group-frontier. Moreover, there are significant differences between different regions in production technology and energy efficiency. The performance of eastern China is better than other regions. But the technology gaps between the different regions are shrinking and converging over time. Finally, some policy recommendations are proposed to improve the energy efficiency of the industry. [ABSTRACT FROM AUTHOR]

China has become the world largest paper and paperboard producer. However, pulp and paper industry has involved high resource consumption and severe pollution especially for water. This research has assessed the eco-efficiency of China's pulp and paper industry at the national level and provincial level. An overview regarding the cleaner production of China's pulp and paper industry was presented to reveal the measures for reducing environmental impact in the last two decades. Slacks-based measure was used to analyze the efficiency levels of 16 provinces' pulp and paper industries. To uncover the underlying causes of eco-efficiency performance, Malmquist–Luenberger index was calculated to discover the drivers of productivity growth of pulp and paper industries. Our results showed that the pollution treatment of China's pulp and paper industry has made progress in terms of water consumption and water pollution, although the absolute amount of pollution discharge is still large. Chemical oxygen demand emissions are still the first critical influencing factor of pulp and paper industry's inefficiency. Furthermore, efficiency progress was the dominating contribution of the industry's productivity growth between 2010 and 2013. The policies for adjusting the industrial structure of pulp and paper industry have resulted in the scale effects through eliminating backward production capacity and accelerating merger and acquisitions. Moreover, the productivity of pulp and paper industry was underestimated when the undesirable outputs were ignored. It indicates that the stricter environmental regulations have positive effects on paper companies to internalize environmental pressures in the production activities through environmental management. In the future, pulp and paper companies should further internalize the cost of pollution treatment through scale effects and technology improvement. [ABSTRACT FROM AUTHOR]

The pulp and paper industry accounts for approximately 5% of total industrial energy consumption and contributes 2% of direct carbon dioxide (CO 2 ) emissions from industries. World paper and paperboard demand and production are increasing significantly, leading to an increase in this sector's energy use and CO 2 emissions. Although current studies identify a wide range of energy-efficiency technologies that have already been commercialized for the pulp and paper industry, information is limited or scattered regarding new energy-efficiency technologies that are not yet fully commercialized. Development of emerging or advanced energy-efficiency technologies and their deployment in the market will be crucial for this industry's mid- and long-term energy saving and climate change mitigation strategies. This paper compiles available information on energy savings, environmental and other benefits, costs, and commercialization status for 25 emerging technologies to reduce the energy use and CO 2 emissions. The purpose is to provide a well-structured comprehensive review on these emerging energy-efficiency technologies for engineers, researchers, investors, policy makers, pulp and/or paper companies, and other interested parties. [ABSTRACT FROM AUTHOR]

The pulp and paper industry faces several challenges linked to climate and environmental impact, resource efficiency, rising energy prices, increased competition for biomass resources, and declining demand for traditional printed paper products. However, these challenges also offer strategic opportunities for the industry to develop into a competitive, resource-efficient, and low-carbon industry in line with a biobased economy. Against this background, this paper aims to analyse current energy strategies in the pulp and paper industry in Sweden. Specifically, the paper analyses how companies combine continuous process efficiency to reduce energy costs with activities that could be developed into new energy-related products to increase revenue. Most of the analysed companies work to various degrees with both these strategies, employing methods that include improving energy efficiency, energy security, and energy conversion, as well as developing a wide range of biobased energy products. However, our study indicates that there is an untapped potential associated with energy product development, and we conclude that energy efficiency measures can free up resources, enabling the development of new energy products. Finally, several potential managerial outcomes and implications are outlined. • The paper analyses the energy strategies in the pulp and paper industry in Sweden. • Energy strategies focus both to improve energy efficiency and develop new energy-products. • The companies' energy strategies combined exploitation and exploration. • A number of managerial implications are presented. [ABSTRACT FROM AUTHOR]

Deploying renewable energy to unit design energy-efficient technologies may fulfill the additional demand of various energy-intensive industries for their sustainability and resiliency. Multiple Stage Evaporator (MSE) is one of the most energy-intensive units used to extract the water content of the weak liquor in various industries, including the paper industry. This energy intensiveness may be reduced by integrating various Energy Reduction Schemes (ERSs). Hence, this work proposes a ERSs integrated MSE model to analyze its energy efficiency. These ERSs includes Thermo-Vapor Compressor, Steam-, Feed- Split, Feed Preheater, and Flash Tanks. Further, the performance of the proposed model is investigated under two important real-time plant complexities: Boiling Point Elevation and Fouling to achieve more realistic results. The performance analysis is initiated with the formulation of a nonlinear constrained optimization problem to increase the steam economy (SE). Also, the simulation is extended to validate at two different product concentrations (52% and 65%) by employing state-of-art optimization algorithms: CONOPT, and SCA in GAMS and MATLAB respectively. The simulated results shows an increment 1.64% and 1.37% of SE for both 52% and 65% concentration of weak liquor respectively in case of CONOPT than SCA. Also, the waste heat of the condensate, feed, and product may be further utilized for the heat recovery by incorporating the flash tanks which leads to a countable energy saving. Eventually, integrating the solar fields: PTC and LFR ensures a notable reduction in conventional heat utilization by 85.96% and 92.85%, respectively and hence, enhance the energy efficiency. • Expounded energy modeling of ERSs based MSE with BPE and Fouling. • Implementation of NLP and metaheuristic approaches for performance optimization. • Reutilization of waste heat to maximize the energy efficiency. • Integration of solar fields (PTC and LFR) to reduce conventional fuel utilization. • Prospecting the challenges and direction of energy management optimization. [ABSTRACT FROM AUTHOR]

Current management of solid waste from pulp and paper activities represents an environmental and economic burden worldwide due to pollution emissions. This study investigates the potential of hydrothermal carbonisation (HTC) treatment as a sustainable alternative for producing cleaner and energy-dense solid fuel from paper mill sludge. The effect of process parameters (temperature, reaction time and solid load) on hydrochar fuel formation from paper sludge was evaluated and, for the first time, the paper sludge-derived hydrochar was optimised to maximise the mass yield and calorific value using response surface methodology (RSM). The physicochemical characteristics, thermal fuel behaviour, energy recycling efficiency and electricity generation potential were assessed by proximate and ultimate analysis, thermogravimetry, bomb calorimeter, scanning electron microscopy and process energy assessment. Results showed that hydrochar fuel formation and properties were mainly influenced by the process temperature and residence time, and governed by dehydration and decarboxylation reactions which reduced the atomic H/C and O/C ratios by 35.5% and 64%, respectively. The produced hydrochars presented low sulphur, nitrogen and ash content with a maximum calorific value (HHV) of 22.9 MJ/kg, equivalent to the HHV of coal for commercial utility in South Africa. The HHV of the hydrochar corresponded to a 49.80% increase over the HHV of the initial feedstock. The optimum operating conditions were 231 ± 1 °C and 1.99 h for a hydrochar yield of 74.4% and calorific value of 18.5 MJ/kg. The energy assessment showed that up to 58.34% of the energy produced by hydrochar fuel combustion may be recycled as heat or power, while the remaining 41.66% of the combustion energy could be utilised to sustain the HTC treatment of paper sludge. The substantial water demand was concluded to be a drawback. Thus, water recirculation and the potential to catalyse the HTC reactions to increase overall process efficiency will constitute a future study to make the process more environmentally friendly for industrial-scale application. [Display omitted] • Dehydration and decarboxylation were predominant. • Optimum energy yield of 18.5 MJ/kg and 74.4% hydrochar was achieved under 231 ± 1 °C and 1.99 h. • Higher HTC reaction severity enhanced the physicochemical properties of the hydrochar. • Hydrochars produced have low nitrogen and sulphur (<1%) content. [ABSTRACT FROM AUTHOR]

To reduce energy use and achieve a low carbon production in pulp and paper industry (PPI), it is essential to improve energy efficiency in pulp and paper production. In this study, the energy savings from the PPI were estimated based on a techno-economic analysis by EAGER tool for PPI at the factory level. The structure and implement procedure were introduced initially. Two typical pulp and paper mills from China were determined to estimate the impact of selected energy efficiency technologies (EETs) on energy savings as the cases in the base year. One Factory (A) only produced paper products (i.e. corrugated paper and Kraft linerboard) while the other Factory (B) also produced market pulp besides sack paper. In totally 22 selected EETs were applied to assess their saving potential in Factory A, and 29 measures were applied in Factory B. The results show that 2290 TJ and 1179 TJ of final energy could be saved annually in Factory A and B, corresponding to reduction of 29.4% and 13.6% total energy consumption respectively for the case factories. The CO 2 reduction potential was 32.3% for Factory A compared with that of 16.6% in Factory B. It suggests that the pulp and paper mills should encouraged to use this method estimating energy saving potential, and improve their energy efficiency with suggested measures in order to reduce energy consumption and related carbon emissions further in the coming years. • Energy savings of pulp and paper production were estimated at the factory level. • A techno-economic evaluation tool was applied to access the energy savings and carbon emission reductions. • Two typical pulp and paper factories from China were investigated to estimate their energy savings in the base year. • It is useful to assess energy savings and select feasible EETs in achieving energy saving and emission reduction targets. [ABSTRACT FROM AUTHOR]

Papermaking is a water intensive industry. The growth of paper demand will further intensify the need of fresh water resources. Papermaking involves complex processing routes. Previous investigations of water consumption in papermaking industry have focused primarily on key processes and pathways, ignoring the impacts of many intermediate and inter-related processes in paper production cycles and there underestimating the sustainability impacts. Herein, the results of a life cycle analysis of water consumption for papermaking industry in China using an extensive system boundary that includes the water embedded in intermediate processing are presented. The results show the life cycle water consumption and water saving potentials for different papermaking pathways. The advocacy of "forest pulp and paper integration" may have few practical contribution to reducing water consumption due to the low indirect water consumption of raw materials and energy for transportation. [ABSTRACT FROM AUTHOR]

Increasing energy prices and market volatilities force energy intensive industries to implement energy management systems in order to ensure competitiveness. In this paper, we focus on the strategic level of energy management, specifically, on the analysis of the internal and external conditions that form the basis for strategic development. For this, we selected the case of the Austrian paper and pulp industry. We applied a hybrid method by combining an analysis of strengths, weaknesses, opportunities and threats with an analytic hierarchy process which was based on a survey of expert opinion. The results show that cost-related factors predominate. According to our analysis, the four most important factors are all directly linked to energy costs, energy efficiency, and the energy market. Experts pay little attention to environmental issues or to energy market volatilities. Apart from that, the combination of an analysis of strengths, weaknesses, opportunities and threats with an analytic hierarchy process promises to be a valuable tool for strategic energy management. This is especially true for energy intensive companies and/or sectors, since it enables decision makers to take strategic decisions based on a systematic understanding of the main issues. [ABSTRACT FROM AUTHOR]

Abstract: Existing product life cycle assessment (LCA) studies on offset printed matter all point at paper as the overall dominating cause of environmental impacts. All studies focus on energy consumption and the dominating role of paper is primarily based on the energy-related impact categories: global warming, acidification and nutrient enrichment. Ecotoxicity and human toxicity, which are related to emissions of chemicals, etc., are only included to a limited degree or not at all. In this paper we include the impacts from chemicals emitted during the life cycle of sheet fed offset printed matter. This is done by making use of some of the newest knowledge about emissions from the production at the printing industry combined with knowledge about the composition of the printing materials used. In cases with available data also upstream emissions from the production of printing materials are included. The results show that inclusion of the chemical emission-related impacts makes the EDIP97 impact profile of sheet fed offset products much more varied, as well for the normalised profiles as for the profiles weighted by distance to political environmental targets. Especially the ecotoxicity impact potential related to the production stage may contribute significantly, and the use of paper no longer becomes the overall dominating factor driving the environmental impacts. [Copyright &y& Elsevier]

The current approaches to study the coupling mechanism between economy and environment seem to fall into self-circulation, failed to reveal "economy–environment interdependence". In this context, an exogenous variable is introduced into these models for better understanding the relationship. Benzo[a]pyrene (Bap) environment inventories in different cities in China were estimated by fugacity model based on Bap concentration data collected from previous studies. An extended model, stochastic impacts by regression on population, affluence and technology (STIRPAT), generated from original IPAT (a model that expresses the idea that environmental impact (I) is the product of three factors: population (P), affluence (A) and technology (T)) was used to study the relationship between Bap environment inventory and anthropogenic factors including population, vehicle amount, affluence and energy consumption. A ridge regression has been applied to optimize the model parameters. Overall, there exist good relationships between Bap inventories and economic factors. Specifically, population and affluence are the most significant factors that influence Bap inventory. Rise of the scale of population and vehicle amount increases the Bap inventory, as growth of GDP per capita and the efficiency of energy utilization have inhibitory effect on Bap inventory. Apparently, the influences of anthropogenic factors on Bap inventory are different between north and south China. Bap inventory in north China is more sensitive to the change of population and energy consumption, while is highly correlated to GDP per capita in south China. Further, according to social-economic development prediction, with assist of the result from STIRPAT model, we find out that Bap inventory drop 31% from 2001 to 2020 in China. Our estimates are comparable with the published data and confirmed that Bap can be regarded as a chemical indicator of social-economic development in China. Image 1 • An extended STIRPAT model derived from original IPAT was developed. • Population and affluence are the key factors that influence Bap inventory. • Advance of affluence and technology level curbs Bap environmental exposure. • We predict Bap environmental inventory drop 31% from 2001 to 2020 in China. • Bap can be used as an indicator of social-economic development in China. [ABSTRACT FROM AUTHOR]

Abstract: The paper industry is responsible for a considerable amount of greenhouse gas (GHG) emissions mainly due to its intensive energy requirements. The production of heat and power streams in a cogeneration system, i.e., a combined heat and power (CHP) plant, releases considerable amounts of GHG emissions into the atmosphere. Such emissions are already subjected to legislation globally. The amount of GHG emissions is usually calculated from the product of the total amount of energy activity multiplied by an emission factor. However, each energy output stream should get a share of emissions responsibility. This fact could assist in assigning weights to the emissions generated for power and thermal purposes in a combined heat and power plant. However, developing a suitable method of allocating emissions in a cogeneration system is still a concern and a subject research for scientists, companies and policy makers. This paper exposes and evaluates different published allocation methods and applies them to a real case of a combined heat and power plant integrated in a paper mill and proposes a new allocation method. [Copyright &y& Elsevier]

Water pollution and freshwater scarcity are growing problems not only in Europe but all over the world. Water reuse contributes significantly to water sustainability and brings many environmental, economic, and social benefits. The European Union (EU) has recently been addressing water-related problems with great commitment. Unfortunately, the total production of wastewater in the European Union is unknown. The situation in the EU is not satisfactory, as only 2.5% of treated wastewater is reused. The first contribution of this study is the estimation of the total amount of wastewater produced annually in the EU. It is estimated that half of this amount comes from industry, namely over 25,500 million m3. Therefore, this study aims to review and analyze the current state of the industrial wastewater (IWW) issue in the EU and to put it in the context of current EU legislation, targets, and water reuse policy. Moreover, since water reuse technologies are energy intensive, the focus is given to the techno-economic impact of IWW reuse. The energy consumption and investment costs in relation to the amount of water treated have been determined for filtration only, minimum liquid discharge (MLD), and zero liquid discharge (ZLD) systems. Reclaiming 80% of IWW would increase industrial energy consumption by only 4.1%, and investment costs would amount to only 1.5% of the EU GDP. Further, the assessment was focused on the paper & pulp industry, which is among the largest wastewater producers. Implementing efficient water reuse technology in this industry could mean up to 3,449 Mm3/year of reclaimed water. [Display omitted] • Overview of EU legislation with recommendations for future EU policy is presented. • Total amount of wastewater from industry was determined as over 25,500 million m3. • Significant water savings in the industry are possible (80%) using MLD. • Water savings in the paper and pulp industry can be up to 3449 Mm3/year. • 80% of IWW reuse would cost only 1.5% of EU GDP and increase ECI only by 4.1%. [ABSTRACT FROM AUTHOR]

This paper presents an integrated mathematical decision-making model to reduce environmental footprints using process integration. By doing so, we address the research question: How can supplier selection, ergonomic factors, and green practices be integrated into mathematical decision-making models based on the vendor-managed inventory policy ? We use the Branch and Bound method to provide optimal solutions and a metaheuristic optimization approach in computational intelligence for large-scale problems. This paper employs a multi-criteria decision-making method to compare proposed algorithms results based on six criteria. Our findings reveal that integrating the sourcing process with inventory decisions significantly improves cost performance. Furthermore, our results demonstrate that the proposed model effectively balances environmental and economic objectives using a carbon tax. Moreover, sensitivity analysis results indicate that optimizing water and energy consumption can significantly improve carbon footprints. In addition, the study shows that ergonomic factors, including lighting and temperature, have a substantial impact on performance. The primary contributions of this paper include the incorporation of a multi-sourcing strategy, green practices, ergonomic factors, and supplier selection into vendor-managed inventory decision models. [Display omitted] • This paper presents a process integration for sustainable supply chains. • An analytical model is proposed to reduce environmental footprints using a carbon tax. • Water and energy consumption are included in the decision-making processes. • The impacts of ergonomic factors, such as light and temperature, are investigated. • Exact solvers and computational intelligence techniques optimize the proposed model. [ABSTRACT FROM AUTHOR]

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/policies/article-withdrawal). Post-publication, the editor discovered suspicious changes in authorship between the original submission and the revised version of this paper. In summary, The author names Baohua Shen (new First Author) and Minghai Li (new Corresponding Author) were added to the revised paper without explanation and without exceptional approval by the journal editor, which is contrary to the journal policy on changes to authorship. The editor reached out to the authors for an explanation, but they failed to provide a satisfactory explanation to these changes. In addition, it appears that Navid Bohlooli was claiming an affiliation with Sun-Life Company, Baku, Azerbaijan. When questioned, the author was unable to provide convincing evidence of the existence and nature of this company. Overall, the editor feels that the findings of the manuscript cannot be relied upon and that the article needs to be retracted. [ABSTRACT FROM AUTHOR]

Globally, small and medium-sized enterprises (SMEs) constitute a significant industrial segment. However, their energy-efficiency potential has remained largely untapped due to several barriers. The prevailing approaches on energy optimization in the energy-intensive SMEs are focused on the technological improvements at the operational level and lack a strategic approach. This study developed an energy management system (EnMS) for SMEs by integrating technical and managerial energy saving activities (ESAs), suggested in energy management literature. The proposed EnMS adopted a PDCA (Plan-Do-Check-Act) process approach for consistent energy efficiency and cleaner production. For the validation of the proposed EnMS, a case of small-sized Indian paper mill was selected. The case exhibited the ramp of continuous improvement in the energy efficiency at the mill by illustrating two PDCA cycles. Step I (Plan) involved creating energy management roles with management support, energy auditing, identifying energy-saving opportunities and developing action plan; step II (Do) was about creating communication, awareness and motivation before the implementation of the action plan; step III (Check) involved periodic monitoring, analysis and reporting of the energy key performance indicators (KPIs), and benchmarking enterprise energy performance. The case analysis showed a 35% reduction in specific energy consumption (SEC) of one of the Paper Machine's (PM) vacuum system by the implementation of ESAs for vacuum optimization, generating an annual energy-saving of 0.3 GJ/t. In step IV, the subsequent PDCA cycle was triggered by the biannual management review for exploring the new energy saving opportunities at the enterprise. The next improvement cycle targeted at steam and condensate system optimization in another PM resulted in an additional energy cost saving of USD 26,900. [ABSTRACT FROM AUTHOR]

Blockchain technology, with its peer-to-peer trading feature, influences the management of energy consumption by offering the potential to transform transparency, efficiency, and sustainability within the energy sector. Nonetheless, there is a need to develop analytical decision-making models tailored for managing peer-to-peer energy transactions to improve energy resilience. Therefore, the purpose of this paper is to address the research question: How can energy distribution systems be protected via blockchain technology to enhance energy resilience and mitigate vulnerabilities to disruptions ? This paper employs a conceptual research model design and a mathematical decision-making model to address the research question by capturing the peer-to-peer trading capability of blockchain technology. The theory of planned behavior provides theoretical explanations for the proposed model. The sample includes longitudinal energy consumption data from 2015 to 2023 in Texas. The findings indicate a significant improvement in energy efficiency along with a considerable decrease in total electricity consumption. Post hoc analysis results reveal that the seasonal autoregressive integrated moving average algorithm is effective as a reliable input for the proposed mathematical model. The significant implications are to implement blockchain-based smart grids in which energy systems become more resilient to disruptions, as the peer-to-peer capability enables users to trade energy. The proposed model suggests that energy will be used more efficiently and effectively. This paper contributes to prior works by introducing a mathematical model that captures the trading behavior of energy consumers. Moreover, this paper proposes the SARIMA algorithm to predict energy demand. • A mathematical peer-to-peer trading model is presented to improve resilience. • A blockchain-based smart grid is presented for consumer energy consumption. • Five machine learning algorithms are presented in energy demand management. • Longitudinal energy consumption data of Texas is used in the model. • Theoretical support is provided using the theory of planned behavior. [ABSTRACT FROM AUTHOR]

Since General Secretary Xi Jinping pledged the "30·60" targets to the world, the importance of pollution reduction and carbon reduction has become increasingly prominent. The previous focus on the pollution reduction effects of emission trading systems, while overlooking their carbon reduction impacts, as well as the limitations of research methods and scope, is no longer suitable for the needs of the new era. Therefore, this paper constructs a CGE model to study the synergistic effects, simulating the synergistic emission reduction effects of sulfur dioxide emission trading policies, and comes to the following conclusions: After the implementation of the sulfur dioxide emission trading mechanism, under different sulfur price scenarios, the synergistic reduction amounts of SO 2 and CO 2 vary greatly. As the sulfur price increases, the reduction amount becomes larger. In the five sulfur price scenarios set in this paper, the maximum reduction of SO 2 can reach about 111,400 tons, and the maximum for CO 2 is about 399 million tons. The CO 2 reduction rate is approximately 1.0767 times that of SO 2. This indicates that the sulfur dioxide emission trading policy is a very effective path for synergistic pollution and carbon reduction, with good reduction effects. In addition, sulfur dioxide emission trading will reduce the consumption of fossil energy, decrease industry output, raise product prices, cause GDP loss, and lead to reduced social welfare to varying degrees. [ABSTRACT FROM AUTHOR]

Energy development in industrial parks promotes both industrial and inter-park economies. However, as the number of industrial parks increases and the economic level of the parks rises, energy consumption is also increasing rapidly. The rapid expansion of inter-park trading markets is accompanied by a surge in carbon emissions, making industrial parks increasingly significant contributors to carbon emissions within the industrial sector. In response to this environmental challenge, this paper proposes an integrated trading approach within industrial parks that considers carbon constraints. By implementing a spot trading method for surplus industrial energy, the goal is to mitigate the carbon emission pressure within these parks. Firstly, the paper conducts an analysis of the characteristics of combined heat and power units in industrial parks. It introduces an integrated analysis method within the target region, consolidating information from various park units to enhance flexibility in energy utilization. Secondly, an energy storage model is established. This model efficiently leverages energy storage capacity to balance fluctuations in energy supply and demand within industrial parks, thereby alleviating carbon emission pressure. Finally, the study and analysis of an industrial park in Liaoning Province were conducted using the Yalmip + Gurobi commercial software on the MATLAB platform. Compared with the traditional industrial park, the carbon dioxide emission of the industrial park is reduced by 91.49t, and the energy cost is saved by 11.2 million RMB. Numerical results from instances indicate that this method surpasses traditional trading approaches, aligning with the rigorous standards of scientific research. • An energy storage model is proposed to address the shortage of energy storage in waste heat trading in industrial parks. • A coordinated scheduling program is presented to reduce energy scheduling imbalances between multiple campuses. • The carbon-constrained energy storage device is integrated to improve the decarbonization capacity. [ABSTRACT FROM AUTHOR]

Abstract The annual market demand for disposable baby diapers exceeds 20 billion units (690 kt) in the European Union (EU). Almost 40,000 disposable diapers are used every minute, producing 1.3 t/min (dry weight) of waste. Based on the estimates in this work, this requires 90.3 PJ of primary energy and emits 2.7 Mt CO 2 eq. annually. In an attempt to reduce resource, waste and environmental impacts associated with diapers, this paper focuses on novel design and manufacture of disposable baby diapers. This involves using optimised absorbent core and novel bonding technologies to replace conventional gluing of diaper materials. Life cycle assessment has been performed to compare the environmental performance of these new diapers, here termed "glueless", with standard designs. The annual resource consumption and environmental impacts of glueless diapers have been estimated at different production levels: a single production platform, an industrial plant, a country (Italy) and the EU, taking into account different production volumes, electricity mixes and waste management options. Different market penetration scenarios have been considered to determine potential environmental implications at the EU level by 2020. The results reveal that glueless diapers reduce the consumption of raw materials by 23% (9.2 g/diaper), primary energy demand by 25% (752 kJ/diaper) and global warming potential by 10% (10.4 g CO 2 eq./diaper) compared to the standard diapers. They also have more than 50% lower eutrophication, ozone depletion and human and eco-toxicity. Up to 16 PJ primary energy and 191,000 t CO 2 eq. would be saved annually in the EU by using glueless diapers. The cumulative savings would amount to 47 PJ and 566,000 t CO 2 eq. by 2020. The annual consumption of raw materials at the EU level would be reduced by 196,000 t with cumulative savings of up to 584,000 t by 2020, also reducing the equivalent amount of waste from the disposal of diapers. Consequently, glueless diapers can contribute to meeting the energy, climate and resource efficiency goals specified in the EU 2020 strategy. Graphical abstract Image 1 Highlights • Novel design and manufacture of "glueless" disposable baby diapers is considered. • Glueless diapers save 23% of materials and 25% of energy relative to standard type. • Most life cycle impacts are reduced by >50% and global warming potential by 10%. • Up to 584,000 t of waste and 566,000 t of CO 2 eq. can be saved by 2020. • Glueless diapers can help meet the EU energy, resource and climate change targets. [ABSTRACT FROM AUTHOR]

Abstract The presence of hazardous trace elements (HTE) in the chemical recovery cycle of Kraft pulp mills is the main obstacle for the utilization of the inorganic residues of the process. Electrostatically precipitated (ESP) recovery boiler fly ash (RBFA), consisting mainly of sodium sulfate Na 2 SO 4 , is a solid side stream where HTE are concentrated. Unlike most other ashes, RBFA is to a great extent water-soluble. A novel reverse leaching method, based on the dissolution behavior of RBFA in water, is introduced in this paper. The method is founded on the use of an appropriate liquid/solid mass ratio and a favorable pH, which together contribute to the formation of a small and readily settling solid residue where almost all HTE are concentrated. This paper focuses on evaluating the influence of the treatment conditions on HTE removal, energy consumption and material losses. The results of this study show that the removal efficiency of the investigated HTE and other analyzed metals was excellent under alkaline conditions, the apparently suitable pH range for the removal of most of these metals being approximately 11.7–12.2. Lead was observed to be the most difficult HTE to remove: the highest obtained degree of removal of Pb was 89%. The removal rate of Cd and Zn was approx. 100% within the mentioned pH range. Highlights • A novel method for the removal of hazardous metals from recovery boiler fly ash was introduced. • The highest removal efficiencies were generally obtained at pH 11.7–12.2. • Good removal efficiencies can be obtained without pH adjustment. • The removal process was especially efficient for Cd and Zn. [ABSTRACT FROM AUTHOR]

Abstract With fast development and urbanization, Chinese cities are facing several challenges including issues of environmental pollution, climate change, resource depletion and landfills shortage. Waste recycling is one effective way to respond these challenges. Under such a situation, this paper aims to evaluate energy saving and carbon reduction potential of recycling wastes by taking Shanghai, the biggest city in China, as a case study. Results show that 8.7 Mt standard coal (tce) and 16.81 Mt CO 2 could be reduced under current recycling system in Shanghai. And recycling of waste steel and nonferrous metals were the two dominant contributors, accounting for about 44% and 42% of energy saving, and 60% and 33% of CO 2 reduction, respectively. If the recycling rates of main recyclable wastes were improved to 100%, additional 6.44 Mt energy and 10.02 Mt CO 2 could be further saved, mainly from recycling waste glass, waste plastic and waste metals. Adoption of RPF (Refuse Plastic & paper Fuel) could further contribute to 1.24 Mt energy saving and 2.67 Mt CO 2 reduction. Finally, policy implications on establishing a mature recycling system and promoting RPF technologies are discussed, in which the potential on reducing total energy consumption and CO 2 emission of Shanghai can reach 6.6% and 4.9%, respectively. [ABSTRACT FROM AUTHOR]

Abstract Pulp and paper manufacturing sector constitutes one of the largest industry segments in the world in terms of water and energy usage as well as of significant use and release of chemicals and combustion products. Since its chief feedstock –wood fiber– is renewable, this industry can play an important role in sustainable development, becoming an example of how a resource can be managed to provide a sustained supply to meet society's current and future needs. This calls for a thorough assessment of environmental costs and impacts associated to pulp and paper operations, including both direct and indirect inputs supporting the whole papermaking process as well as the main outputs, co-products and by-products. By means of Life Cycle Assessment (LCA) methodology, this paper aims at assessing the environmental sustainability of the pulp and paper production so as to identify those phases across the whole supply chain that entail the highest environmental loads, thus requiring improvements. To determine the environmental impacts as accurately as possible, the manufacturing stages performed in the pulp and paper mill complex of Stora Enso Oyj Veitsiluoto Mills at Kemi, Northern Finland, were taken as a model and assessed by means of the SimaPro 8 LCA software, utilizing ReCiPe Midpoint (H) method for the impact assessment. As expected, most of the resulting impacts are caused by the industrial production phase. The production processes of pulp and paper jointly affect all the investigated impact categories with the highest shares, ranging from 50% of generated impacts on water depletion up to 88% on freshwater eutrophication. Generally, the main contributions to environmental loads come from the electricity and heat requirements and, only at a minor extent, from the use of chemicals such as the sodium hydroxide and sodium chlorate. In particular, pulp production process generates the main loads on global warming (46% of the total impacts), ozone depletion (39%), freshwater eutrophication (55%), human toxicity (46%), metal depletion (42%) and fossil depletion (46%). In the remaining investigated impact categories, namely terrestrial acidification, photochemical oxidant formation and terrestrial ecotoxicity, most of impacts derive from the use of optical brighteners and fillers in the final steps of paper production and from the intensive consumption of water in the recycling step of end-of-life affecting water depletion. Moreover, the implementation of measures for material and energy efficiency in the assessed system, such as the use of renewable energy generated in situ from black liquor and residual biomass to support the requirements of the integrated pulp and paper mills and the waste paper recycling, resulted to be crucial in lowering the environmental burdens. In particular, the partial fulfillment of electricity and heat requirements by means of a circular use of residues within the system leads to a noteworthy reduction of impacts in all the investigated impact categories, up to more than 70% in global warming and fossil depletion potentials, thus contributing to higher process sustainability compared with other averaged European systems for paper production. The obtained research results are a valuable source of management information for the decision makers, at both company and national levels, with the aim to improve the environmental performance of pulp and paper industry. Highlights • A Life Cycle Assessment (LCA) of papermaking in Finland was performed. • The main environmental hotspots in each process step were identified and discussed. • Energy and material efficiency solutions leads to a noteworthy reduction of impacts. • Pulp and paper industry is a benchmark model to transition towards a circular economy. [ABSTRACT FROM AUTHOR]

Our paper analyzes the optimal capacity investment in solar panels system for consumers. During the daytime, solar panel system absorbs energy from the sun and supplies the energy generated to the building structure. Our model takes into consideration the variations in the daily consumption of electricity and the variations in the daily available sun energy. We model these variations in our paper as uncertainty in energy demand and uncertainty in energy supply. Excessive usage of electricity that is beyond the energy generation of the solar panels are bought at a higher price from the utility company than the payment received from the utility company for excess energy sold to the grid. We analytically solve for the optimal quantity of solar panels to purchase and install. Our paper fills the research gap in quantifying the impact changes in solar energy yield rate, consumption, and sell-back rate has on the consumer's optimal investment decision in solar panels. We find that the optimal quantity of solar panels increases with the cost of energy during the daytime and payment for excess energy sold to the grid. Interestingly, when solar yield increases, the optimal solution only increases initially, and then it will eventually decrease. Furthermore, our analytical models provide consumers with a decision support system to determine the optimal number of solar panels to purchase and install while taking into consideration the random yield of solar panels, variations in energy consumption, and potential for sell back of excess unused energy generated under complex billing structures from the utility company. Our mathematical models are adaptable to policy changes such as rebates and purchase and sell back rates for electricity. Our numerical study validates the mathematical models and further analyzes the impact changes in solar energy yield rate, energy consumption, and sell-back coefficient have on the consumer's capacity investment decision in solar panels. Our numerical studies find that the lower the reliability factor of solar yield, the more impact the daytime energy cost has on the optimal quantity. When the sell-back coefficient exceeds a certain threshold, the optimal quantity of solar panels increases exponentially. [Display omitted] • We model the optimal quantity of solar panels to purchase and install for consumers. • Optimal quantity increases with consumption, but the rate of increase is decreasing. • Optimal quantity increases with energy daytime cost and sell-back rate. • When solar yield is high, the impact of payment coefficient is significant. • Increased variability in consumption, optimal quantity increases. [ABSTRACT FROM AUTHOR]

This research paper analyses the potential of multi-angled façade systems to achieve the sustainability goals of reduced energy consumption and improved indoor climate quality, hence aligning with UN SDGs 3, 11, 12 and 13. The objective of this research paper is to define the suitable glass properties for the two windows of the multi-angled façade. The concept of a multi-angled façade system is based on proposing using two different window orientations in each façade on a vertical axis (right and left), but not tilted up and down. The large part of the multi-angled façade is oriented more to the north to optimise the use of daylight and the small part of the multi-angled façade more to the south to optimise the use of solar radiation through the façades. One can optimise using daylight and solar heat inside the office room through the multi-angled façade design concept, but with less complexity in the design, manufacture, and transport phases. This is the gap between 3D façades and the new multi-angled façade system concept, which indicates its novelty. To evaluate the energy consumption, the researcher used the software program IDA ICE version 4.8. to analyse the energy behaviour through the façade and the building's indoor climate, to compare the glass property impacts. The researcher modelled five scenarios for a multi-angled façade with different glass properties in both parts of the multi-angled façade. Researchers have used this software in simulations to validate, test, and compare statistics for more than 25 years according to ASHRAE 140, 2004, and CEN Standard EN 15255 and 15265, 2007. To conduct the analysis for the material's embodied energy in the multi-angled façade, the researcher used the software LCAbyg version 5 and compared it with the situation for a flat façade. The results for the energy consumption results revealed that the energy behaviour in the first scenario's glass type is recommended because the illumination was better and offered lower total yearly energy consumption and the accepted number of overheating hours inside the office room. The result of the embodied energy for the materials of the multi-angled façade shows that the area-weighting of the sum of the total energy consumption through the building's lifetime and embodied energy is higher when one renovates with a flat façade by about 11%. • Discussing the potential of multi-angled façade systems as a new concept for office buildings. • Defining the suitable glass properties for the multi-angled façade's windows. • Explaining a good visual, optical, and thermal indoor climate; and. • Evaluating the embodied energy amount for the multi-angled façade materials. [ABSTRACT FROM AUTHOR]

This paper presents an analysis of the water-energy-food nexus (WEFN) system, focusing on its interlinked structure and dynamic characteristics. This paper proposes a dynamic series-loop data envelopment analysis (DEA) model with a directional distance function for measuring WEFN efficiency in China. A spatial Durbin model is constructed to investigate the impact of extreme temperatures on WEFN efficiency. The results are as follows. (1) Compared with the black-box DEA model and series network DEA model, a series-loop network DEA model can reflect the "networking effect" and "looping effect" in the WEFN system. (2) The WEFN system performs well with an average series-loop efficiency of 0.875, but the efficiency of the water subsystem scores low and needs improvement. (3) At the national level, extremely high and low temperatures have no significant effect on the WEFN efficiency in local or adjacent provinces, whereas average temperature promotes the WEFN efficiency in local provinces but hinders it in neighboring provinces. In the regions with a low temperature difference, average temperature has no impact on the WEFN efficiency of both the province itself and its neighboring provinces. Overall, this study provides valuable insights into the complex interlinkages within the WEFN system and highlights the importance of considering these relationships when improving the system efficiency. [ABSTRACT FROM AUTHOR]

The OECD community consumes excessive amounts of raw materials and materials, which leads to pollution and increases the material footprint. The material footprint is directly linked to the Sustainable Development Goals (SDGs)-8 and 12. The main reason for the material footprint is the usage of fossil fuels, and the dependence of OECD countries on fossil fuels continues to this day. By expanding renewable energy utilization due to rising energy security risk, a community can take steps to improve ecological quality and reduce its material footprint. In this context, the paper focuses to examine the impact of energy security, green innovation, economic policy stringency and income on the fossil fuel material footprint for 24 OECD countries over the period 1995–2018. To this end, the paper uses the Augmented Mean Group (AMG) method and novel Half Panel Jackknife (HPJ) causality and estimation approach. The study adds value to existing knowledge by empirically testing the determinants of fossil fuel material footprint for OECD countries for the first time using the novel HPJ approach. The results of the AMG show that increasing energy security risk index reduces the material footprint, while green innovation and economic policy stringency have no impact on environmental degradation. The environmental Kuznets curve (EKC) in the form of an inverted U and an inverted N are valid for OECD countries. The HPJ approach also illustrates that there is a causality from green innovation and energy security risk to material footprint, and innovation and risk are support footprint reduction. Based on these results, the study recommends that OECD policymakers pay attention to ensuring energy security to reduce the material footprint by expanding renewable resources and allocate more economic resources to green innovations with higher returns, considering the validity of the EKC. [Display omitted] • Applies second-generation panel data methods. • Investigates the fossil fuel material footprint for 24 OECD countries. • The EKC hypothesis holds for the fossil fuel material footprint of OECD countries. • Green innovation and energy security risk reduce fossil fuel material footprint. • Increasing risks and technological development contribute to SDGs 8 and 12. [ABSTRACT FROM AUTHOR]

With the fragmentation of global production, the share of intermediate trade in international trade has increased significantly. Nevertheless, more research must be done on how intermediate trade factors influence energy consumption. This paper utilized the multi-regional input-output (MRIO) model to categorize China's energy utilization into six parts based on its position within the global production chain. Additionally, it examined the impact of intermediate factors on China's energy consumption through index decomposition analysis (IDA). The results revealed that: (1) from 2000 to 2014, intermediate factors led to an increase of 1380.96Mtces in China's energy consumption, accounting for around 37% of the national total; (2) the reduction in efficiency is the primary cause of the surge in domestic intermediate energy consumption, while the increase in market proportion is the dominant driver promoting international intermediate energy consumption growth; (3) the international intermediate proportion contributed the most among all intermediate factors. Drawing upon the findings above, this paper proposed policy recommendations to regulate China's rising energy consumption, precisely the escalation of intermediate process energy usage, focusing on the global production chain. [Display omitted] • Energy consumption is divided into six parts based on the intermediate destination. • Fifteen factors is decomposed based on index decomposition analysis. • The contributions of the structure, proportion, and efficiency changes is considered. • This paper shows a way of identifying the composition of energy consumption. [ABSTRACT FROM AUTHOR]

Environmental issues are closely related to the economic development of human society, and reducing environmental pollution during production is of great significance for environmental protection. This paper utilizes data from Chinese industrial enterprises (2001–2010), and establishes a fixed effects model to examine whether minimum wage standards are important in reducing non-clean energy consumption by enterprises. The results indicate that an increase in the monthly minimum wage leads to a significant reduction in coal consumption by firms, while the change in the hourly minimum wage do not exert a statistically significant influence on coal consumption by firms. The above empirical results remain robust after conducting a series of endogeneity tests. The mechanism test shows that innovation and exports serve as mediating variables between the minimum wage and coal consumption. Specifically, raising the minimum wage can incentivize enterprises to innovate in production and expand their exports, resulting in a decrease in the consumption of non-clean energy. Finally, through the heterogeneity test, we observe that increases in the minimum wage have varying effects on coal consumption among firms with different numbers of employees and different ages. Based on the research findings of this paper, we propose that the government should comprehensively consider and improve relevant systems, formulate scientifically-based minimum wage standards, take into account both workers' rights and interests as well as enterprises' profits, actively promote energy transformation in enterprises, and ultimately achieve long-term development of the social environment. [ABSTRACT FROM AUTHOR]

Cities have emerged as critical and challenging places for promoting the green and low-carbon transformation of the economy and society in the context of the "dual carbon" targets. Meanwhile, fiscal policy is also an indispensable component of the public policy framework supporting the green and low-carbon transformation. This paper uses the pilot project of "Comprehensive Demonstration Cities for Energy Conservation and Emission Reduction Fiscal Policies" ("ECER-CD" policy) implemented in China since 2011 as a quasi-natural experiment. This research theoretically analyzes and empirically tests the energy conservation and emission reduction effects of fiscal policies supporting green and low-carbon transformation utilizing methodologies such as time-varying DID and multiple periods and multiple groups of DID. The study finds that the pilot cities effectively reverse the behavioural bias of local governments and promote energy conservation and emission reduction efforts. This conclusion holds after undergoing robustness tests such as parallel trend analysis and heterogeneity treatment effects. The effectiveness of the pilot policy is attributed to the upgrade of industrial structure, improvement of energy efficiency, and the effects of green technology innovation. However, cities' geographic location and resource dependency can interfere with the effective implementation of policies. This paper also further explores the environmental dividends and economic consequences of the policy and finds that the pilot cities have certain environmental dividends and do not significantly restrain economic and social development. This study broadens the research perspective on fiscal policies in energy conservation and emission reduction and clarifies the pathways through which fiscal policies promoting green, low-carbon transformation drive energy conservation and emission reduction in cities. Moreover, it also improves the use of the Difference-in-Differences method in evaluating policy effects in scenarios such as the overlapping implementation of pilot policies and policy withdrawal. Finally, this paper proposes policy recommendations to provide more empirical evidence for China to accelerate the green and low-carbon transformation of the economy and society. [ABSTRACT FROM AUTHOR]

Energy-saving construction has promoted the sustainable development of cities and is an important measure to achieve carbon neutrality and peak carbon. This paper uses the synthetic control method(SCM), propensity score matching difference-in-difference model(PSM-DID), spatial Durbin difference-in-difference model (SDM-DID) and other methods to explore the policy effect of energy-saving policy on the green innovation efficiency of Chinese cities based on the New Energy Demonstration City(NEDC) policy as a quasi-natural experiment. The paper has found that establishing NEDC can significantly improve the green innovation efficiency of pilot cities, and its positive impact continues to increase over time. The effect of energy-saving policy has regional heterogeneity, and NEDC can promote the improvement of urban green innovation efficiency more in eastern and central China. The results of PSM-DID further verify the robustness of the previous conclusion. The results of SDM-DID show that NEDC has a positive spatial spillover effect on the improvement of urban green innovation efficiency. NEDC policy can effectively promote the improvement of green innovation efficiency in neighboring cities of pilot cities. Mechanism analysis shows that NEDC affects urban green innovation efficiency by optimizing industrial structure, reducing resource dependence and gathering innovative elements. This paper enriches the research on the effect of urban energy-saving policies and provides policy references for improving urban green innovation capabilities. [Display omitted] [ABSTRACT FROM AUTHOR]

Implementing sustainable or green strategies in warehouse management has become increasingly important. The environmental impact can be assessed by evaluating resource usage and productivity. A proper method for assessing the sustainability of internal processes can provide a valuable tool for companies to understand what is being done correctly and what needs to be improved to comply with new guidelines. For this paper, a case study at Arvato warehousing provider for end consumer products was conducted, and a rating mechanism model for warehouses was developed. Data on energy consumption and productivity were collected from output of 13 warehouse units (modules). From the collected data, a set of KPIs, an index system, an automation categorization system, and a ranking system were created to help with decision making, problem identification, and solving. As result, this paper demonstrates the impact of different material handling systems on energy consumption and found that a higher level of automation does not always translate into operating more efficiently in terms of sustainability. Instead of reporting absolute numbers, this study created an index that displays relative values, making it much easier to identify the most efficient modules. Additionally, this study takes the automation index a step further by creating three categories of automation levels in addition to the percentage that indicates how advanced the technology in a warehouse is, allowing for the creation of groups of warehouses and the comparison of their performance. • Increased automation does not always translate into sustainable operational efficiency. • In general, warehouse units employing less technology perform worse. • Supply chain transparency can increase by grouping and scoring warehouses efficiency. • Electricity and productivity index enable measuring environmental impact. • Energy performance and productivity are related at various levels of automation. [ABSTRACT FROM AUTHOR]

Environmental issues have become global challenges, so seeking an economic model to reach environmental sustainability is essential. As an emerging economic model, green finance is considered the most effective tool in promoting low-carbon economic transition. China, the largest economy among developing countries, faces environmental inferiority and increasing energy demand. This paper aims to discuss the effects of green finance on the low-carbon economic transition. This paper makes the policy of green financial reform and innovation pilot zones a quasi-natural experiment. It employs difference-in-differences (DID) model to analyze the impact of green finance on the low-carbon economic transition. This paper found that the low-carbon economic transition achieved good results within experimental zones after establishing a pilot zone for green finance reform and innovation. Furthermore, the parallel trend test results, complicatedly disturbing facts mitigating provincial differences, and placebo tests are still valid. Finally, we found that low-carbon economic transition solely takes effect significantly in eastern and central areas but is not significant in western areas. The paper suggests that green finance has played an apparent role in promoting low-carbon economic transition and provides essential reference and experimental evidence for future economic transition after analyzing the pilot zone for green finance reform and innovation policy. • Green finance is a crucial tool for achieving low-carbon economic transition. • Eastern and middle regions experienced significant effects. • The study provides valuable experimental evidence for future economic transition. [ABSTRACT FROM AUTHOR]

The additive manufacturing (AM) paradigm, especially in the distributed manufacturing setting, is a novel paradigm that can bring production of components closer to the consumers, at potentially lower economic and environmental costs. In this paper, we present a comparative analysis of AM with conventional manufacturing (CM) from the energy consumption perspective to assess under what conditions AM is better—a key gap in the area. Leveraging an energy consumption survey between CM and AM supply chains, this paper analyzes the significance of transportation in a cradle-to-gate partial life cycle analysis. Though the decentralization of AM has been discussed in energy consumption assessments, it has not been discussed in terms of how the distributed components and their transportation would affect the two supply chains' scenarios. This gap motivated this research to conduct energy efficiency assessment of AM and its comparison with CM in a distributed supply chain. Our analysis showed that transportation contributed 3x to 4.5x increase in the overall energy impact in CM compared to corresponding transportation in the AM setting. In effect, from our analysis, for every three CM parts, the transportation energy consumption approximately equaled the energy needed to manufacture one similar part in AM. Our analysis leverages the solid-to-envelope ratio "α", defined as the volume of solid material within a part's envelope. Based on our analysis, AM would be the preferred production method for α values falling within the range of 0.08–0.22 (8–22% of raw material efficiency in CM). Hence part geometry, where AM has greater potential for energy savings by reduction in the amount of material waste, is a good indicator for using AM over CM for energy efficiency. We also discuss several future directions for better assessment of AM versus CM under different settings and upcoming innovations such as Industry 4.0. [ABSTRACT FROM AUTHOR]

The rapid development of urbanization in China inevitably leads to a sharp increase in building energy consumption, and Passive House (PH) have received much attention in China in recent years. In this paper, the annual energy demand (AED) and summer discomfort hours (SUH) of PH are used as optimization objectives to establish a set of design solutions for multi-objective optimization (MTO) and economic analysis of a PH in Shandong Province, China. It is found that (1) the algorithm based on nearest neighbor component analysis (NCA) feature extraction applies to the sensitivity analysis of multivariate nonlinear high-dimensional data, and the NCA-GA-RBF neural network technique is proposed, which has significantly improved the goodness of fit and generalization ability for AED and SUH. (2) The NSGA-II genetic algorithm is used for the optimization search, and the results show that the overall improvement rates of AED and SUH are 25.5% and 21.6%, respectively, among the nine solutions after comprehensive evaluation; (3) Finally, the optimal scheme of energy saving and the optimal scheme of the economy are selected for economic evaluation. By comparing the economics of the two options and the improvement rates of AEDs and SUHs, the guidelines for design decision-makers are provided. In summary, the design scheme of this paper is forward-looking and reference-oriented and provides some reference suggestions for the development of PH in China. • The NCA algorithm is suitable for multivariate nonlinear sensitivity analysis. • NCA-GA-RBF has stronger and more stable generalization ability and accuracy. • In this paper, climate is the main factor affecting thermal parameters. • Global costs have a stronger economic interpretation. [ABSTRACT FROM AUTHOR]

Iron & Steel, Pulp & Paper, Non-Metallic Minerals and Chemical & Petrochemical are the most energy intensive subsectors, even though they utilise only a limited range of production processes compared to other sectors like Machinery or Food & Beverages. To support future efforts for decarbonising the European industry, this study aims to develop a methodology to correctly and dynamically depict all relevant production processes of the mentioned subsectors and to generate synthetic load profiles (LP) 1 1 LP ... Load Profile. based upon their consumption and generation behaviour. In a first step, the energy intensive subsectors and their main production processes are identified. A standardised research approach is used to correctly depict their characteristics e.g. runtime, energy consumption and generation, unit sizes etc. Next, a methodology for modelling the timely behaviour of these production processes and for generating synthetic LPs is developed. This method is based upon the bottom-up approach of discrete-event simulation combined with stochastics. The developed methodology is then implemented into the simulation software Ganymed. Finally, the results of this methodology are validated via a case study, modelling the primary steel production route of an Austrian steel mill. In overall, the synthetic electricity LP shows good approximations to the measured one with a mean absolute percentage error of 6.08% for the simulated five days in total. However, a stronger deviation of the generated LP compared to the measured counterpart can be noted at the last two days. This deviation results from a reduction of the capacity during the real life production. This, however, can be taken into account in the synthetic generation given a more extensive data basis. Consequently, Ganymed can be deemed as a suitable software for generating energy consumption and generation behaviour of processes and production chains of energy intensive industries. • Production processes of energy intensive industries are classified and structured. • A methodology for generating load profiles of these industries is presented. • Discrete-event simulation is enhanced extensively to accurately depict industries. • Load profiles of various energy carriers for these industries can be generated. • Various system dimensions from single process to overall plant can be depicted. [ABSTRACT FROM AUTHOR]

The application of a photovoltaic (PV) system for zero energy buildings is crucial to balance energy consumption. This paper investigated the potential of PV systems for buildings in different climate zones of China. The tilt angle, orientation, plot ratio, PV conversion efficiency and location were selected to study their influences on electricity production. The performance of the PV system was analyzed based on a residential building, and employed RETScreen in combination with TRNSYS. The results indicate that southwest China is the best place to develop zero energy buildings. Low-rise residential buildings can realize zero energy in China when the PV conversion efficiency is higher than 20%. However, an energy balance only occurs in the southwest when the PV conversion efficiency is 10%. For different building heights, with a high conversion efficiency (20%), the energy consumptions rates are less than 15 kW h/m2a all over China. In the southeast, the effect of the building shape on energy generation can be ignored due to the high solar elevation angle in the summer. Although the optimal tilt angle varies for different cities, the energy deviations are less than 10% when tilt angle is within 10° of the optimal angle. This study proposed a formula to evaluate the potential of a building PV system. The maximum difference between the simulated and calculated results is approximately 10%, which is reasonable and acceptable. This paper provides some references for the application of PV systems in zero energy buildings. [ABSTRACT FROM AUTHOR]

In this paper, we estimate the energy efficiency of educational buildings with the case study of buildings in City University of Hong Kong by constructing an energy demand stochastic frontier model. The model is estimated by using the university statistical data from 2011 to 2015. For the consistent frequency of data among the variables, we have adopted the quadratic-match sum method to convert annual university report data into a monthly dataset. Our result shows the average energy efficiency is 0.87, implying that 13% of total energy consumption can be saved. We then calculate how much of the energy saving potential has been achieved by constructing the performance score, which increases from 0.08 to 0.17. It implies that the campus performs more efficiently in saving energy over time. We further develop econometric decomposition analysis based on the energy demand frontier model to identify the factors affecting energy consumption. It suggests that research activities account for a large share of overall energy consumption. Analysis on energy end-use shows university should improve efficiency in lab instrument as it is least efficient among the four usages. We expect this paper can provide the fundamental and methodological guideline for university-scale energy efficiency estimation. • Estimating energy efficiency of educational buildings needs to consider the composition of research related factors. • Energy efficiency of campus building presents increasing tendency with seasonal cycle over time. • Research related variables affect significantly on energy efficiency of educational buildings. • Energy use in lab instrument needs to be effectively managed to save energy. [ABSTRACT FROM AUTHOR]

This paper focuses on the properties and mechanism of dissolved gases permeate membrane and energy recovery efficiency in the anaerobic forward osmosis membrane bioreactor under different membranes types (CTA-ES and CTA-NW), membrane orientations, temperatures (25 °C and 35 °C) and influent COD concentrations (3000 mg/L,6000 mg/L and 9000 mg/L). CTA membrane allowed the permeation of dissolved H 2 , and the concentration of dissolved H 2 in the draw side (between 2.4 mg/L and 4.2 mg/L) was higher than the feed side (between 1 mg/L and 3.4 mg/L). This was beneficial to the anaerobic digestion because the partial pressure of H 2 in the reactor was reduced. A small amount of dissolved CO 2 (around 7 mg/L in draw side while between 56 mg/L and 256 mg/L in feed side) was allowed to pass through the CTA membrane. CTA membrane nearly 100% blocks the permeation of dissolved CH 4 at different operation conditions in this paper. The highest methane yield was 0.256 L CH 4 /g COD at 35 °C with the influent COD was 6000 mg/L. This showed that AnOMBR could solve the problem of effluent containing dissolved methane in conventional anaerobic treatment, and had great potential in energy recovery. Image 1 [ABSTRACT FROM AUTHOR]

We present a mechanics based model for predicting the power consumption of drilling operations. Different from existing power models in machining that ignore the tool wear, our model takes into full consideration the tool wear which is particularly pronounced in drilling and causes extra power consumption. For any given spindle speed n and feed rate f , our model establishes the relationship between the length of drill and the total power consumption as well as the amount of tool wear. With this prediction model established, we can then optimize the drilling parameters (n , f) towards different objectives, such as the two applications reported in this paper – to minimize the average power consumption per unit length of drill and to maximize the tool usage before its replacement. Physical drilling experiments of the proposed power prediction model and its two optimization applications are also reported in this paper which have validated the accuracy of the model and convincingly demonstrated its efficacy in deciding optimal drilling parameters (n , f) for energy minimization and other objectives. • An energy consumption model (ECM) for drilling process considering the tool wear is proposed. • The proposed ECM is more accurate and suitable for actual processing and production. • The proposed ECM can conveniently and effectively predict tool life and monitor tool wear. • Optimization of cutting parameters to achieve maximum tool life and minimum energy consumption. [ABSTRACT FROM AUTHOR]

Based on the panel data of 30 provinces in China from 2006 to 2016, the Gaussian kernel density estimation was initially used to describe the characteristics of the inter-provincial differences in household energy consumption (HEC), a dynamic panel data model was established secondly to study the main factors affecting HEC, and finally the counterfactual decomposition method was used to calculate the contribution of each factor to the inter-provincial differences in HEC. The research results are shown as follows: First, the inter-provincial HEC in China shows a phenomenon of agglomeration and growth, and the HEC level of different regions presents difference and imbalance. Second, the logarithms of consumption habits, total population and residents' income have significant effects on the logarithm of HEC, the influence coefficients are 0.191, 0.073 and 0.745, respectively; HEC not only has significant inertia characteristics, but also has certain population size effect and wealth effect. Third, the logarithms of technological progress, urbanization and household energy price have significant effects on the logarithm of HEC, the influence coefficients are 0.864, 0.195 and −0.346, respectively; the HEC saved by technological transformation is not sufficient to offset the increase in HEC demand, urbanization can improve HEC significantly, but the household energy price significantly inhibits HEC. Finally, from the perspective of contribution, the total population, residents' income and urbanization contribute a lot to the inter-provincial differences, totaling 73.02%. The possible innovations of this paper are as follows: First, the contribution of the influencing factors to the difference of inter-provincial HEC is studied, which is rarely seen in the previous literature. Second, compared with traditional decomposition method, counterfactual decomposition method is more convenient for economic interpretation. Third, the divergent conclusions of scholars are pointed out in this paper, and the actual impact of influencing factors on HEC are clarified. Image 10086681 • The level of inter-provincial HEC shows difference and imbalance. • HEC has significant inertia characteristics, population size effect and wealth effect. • HEC saved by technology is not sufficient to offset the increase in HEC demand. • Total population, residents' income and urbanization contribute 73.02%. • The statistical analysis tool used in this paper is Stata15. [ABSTRACT FROM AUTHOR]

The operation of tidal pumping station has an energetic impact on energy course of massive water pumping for a long time. Thus, a multi-objective optimal operation model was developed to optimize the operation scheme and reduce the energy consumption of the tidal pumping station. In the model, a day is divided into several sub-periods according to the regulation of water level in tidal reach. The partition of sub-periods, the number and blade angle of operating units in each sub-period are adjusted to minimize daily operation energy consumption. And the less switching times, the better the reliability and durability of the unit, the lower the failure rate. Therefore, the reduction of wearing parts' service life is quantified for each switching time in the form of cost. A case study is performed with the tidal pumping station of the South-to-North Water Transfer Project in China. In this paper, energy consumption and switching times are quantified as costs respectively, and the result shows that the daily energy consumption could be saved about 2.28%–6.56%, and the switching times reduced at least 60%. Therefore, this paper could provide an effective optimal operation scheme for the tidal pumping station whose operation is affected by tides. [ABSTRACT FROM AUTHOR]

Addressing energy poverty and promoting energy equity are crucial for China to eradicate poverty comprehensively and achieve shared prosperity. Through a combined dynamic evaluation approach to accurately measure the extent of energy poverty, this paper analyzes the staged time series, spatial distribution characteristics of energy poverty applies the Dagum Gini coefficient and variance decomposition to observe the imbalance characteristics of energy poverty and identify the sources of variation. The objective of this paper is to mitigate the influence of spatial disparities on coordinating efforts to eradicate energy poverty across different regions. Consequently, provides valuable insights for decision-making to effectively eradicate energy poverty and expedite the achievement of energy equity. The results indicate: The reduction process of energy poverty in China exhibit phased characteristics from 2000 to 2020, with significant variations in reduction levels among provinces. Different sources of energy poverty exhibits imbalanced spatial distribution and evolution. The overall disparity in energy poverty widens as the phases progress, with characteristic nodes experiencing a temporal delay of 2–3 years compared to the policy nodes. Inter-regional disparities are the primary spatial source of energy poverty differences, while energy use capacity is the main factor contributing to variation. [ABSTRACT FROM AUTHOR]

The coordinated decision-making approach for considering sequential activities of the supply chain results in additional benefits by optimizing production, inventory, and distribution operations. Accordingly, this paper proposes a mixed integer linear mathematical model to optimize a multi-period production routing problem utilizing electric vehicles. The proposed model optimizes the total cost associated with fixed and variable production, holding inventory, and routing, including the fixed cost of utilizing electric vehicles and travel time. However, mileage limitation is one of the main restrictions of utilizing electric vehicles in performing deliveries which is strongly affected by the consumed energy. Although optimization of the routes of vehicles can facilitate using them, considering the variation of travel speed network links during different times of the day because of traffic conditions can obviously affect the required energy to perform the assigned deliveries. To the best of our knowledge, this paper is the first to study simultaneous multi-period dynamic production routing problems using a set of heterogenous electric vehicles whose travel time of links can vary by dividing each production period into several hourly time intervals to capture different traffic conditions. Finally, a series of capable and hybrid metaheuristic algorithms are designed and implemented to solve this problem in a real-case dimension, and all proposed algorithms are compared. • Proposing a multi-period dynamic electric vehicles production routing problem. • Developing a coordinated decision support system to optimize the supply chain. • Considering the variation of travel speed network that affect energy consumption. • Designing a mix integer linear mathematical model to address proposed problem. • Developing a set of capable metaheuristic algorithms to solve proposed problem. [ABSTRACT FROM AUTHOR]

Pressure servo control plays a crucial role in the majority of industrial applications that use compressed air as their power source. How to reduce the energy consumption of the pneumatic system while ensuring the high accuracy of pressure control remains a key problem to be solved. This paper proposes a Gaussian Process (GP) 1 model predictive controller (MPC) applied to a pressure servo control system based on high-speed on-off valves. The smallest quantity of collected data is used to create the GP model. The entire model, which includes some predictive data, is produced once the generated model has been optimized. The GP model is combined with the MPC to perform comparative experiments using an industrial controller with a Field Programmable Gate Array (FPGA). The system responds quickly and with little tracking error in steady-state response studies as well as dynamic response experiments. The GP-MPC achieves the best outcomes in the dynamic comparison tests. The root mean square error (RMSE) is just 2.42 kPa, and the overshoot is less than 59.9% of the Proportional-Integral-Derivative (PID) controller and 68.5% of the sliding mode controller (SMC). Although the compressed air consumption of GP-MPC is basically the same as that of PID, it is significantly better than SMC, with a total saving of about 70.2%. All the experiments prove that the controller proposed in this paper can effectively improve the energy efficiency and tracking accuracy of the pressure servo control system. [Display omitted] • A Gaussian process model for the high-speed on-off valve is developed which is able to predict uncollected data. • A model predictive controller is established by combining the Gaussian process model with rolling optimization method. • The pressure tracking and energy-saving performance are intended to be improved by using the objective function. [ABSTRACT FROM AUTHOR]