Search

Energy development in industrial parks promotes both industrial and inter-park economies. However, as the number of industrial parks increases and the economic level of the parks rises, energy consumption is also increasing rapidly. The rapid expansion of inter-park trading markets is accompanied by a surge in carbon emissions, making industrial parks increasingly significant contributors to carbon emissions within the industrial sector. In response to this environmental challenge, this paper proposes an integrated trading approach within industrial parks that considers carbon constraints. By implementing a spot trading method for surplus industrial energy, the goal is to mitigate the carbon emission pressure within these parks. Firstly, the paper conducts an analysis of the characteristics of combined heat and power units in industrial parks. It introduces an integrated analysis method within the target region, consolidating information from various park units to enhance flexibility in energy utilization. Secondly, an energy storage model is established. This model efficiently leverages energy storage capacity to balance fluctuations in energy supply and demand within industrial parks, thereby alleviating carbon emission pressure. Finally, the study and analysis of an industrial park in Liaoning Province were conducted using the Yalmip + Gurobi commercial software on the MATLAB platform. Compared with the traditional industrial park, the carbon dioxide emission of the industrial park is reduced by 91.49t, and the energy cost is saved by 11.2 million RMB. Numerical results from instances indicate that this method surpasses traditional trading approaches, aligning with the rigorous standards of scientific research. • An energy storage model is proposed to address the shortage of energy storage in waste heat trading in industrial parks. • A coordinated scheduling program is presented to reduce energy scheduling imbalances between multiple campuses. • The carbon-constrained energy storage device is integrated to improve the decarbonization capacity. [ABSTRACT FROM AUTHOR]

China's climate and environmental problems remained prominent. Energy transition was the key to improve climate and pollution, and it was at a critical period. Previous studies mostly focused on the impact of climate policies on the reduction of air pollutants and the environmental health impacts of individual sector or pathway policies. Thus, focusing on the synergistic abatement of CO 2 and air pollutants and health effects of energy transition in carbon neutrality was significant for building beautiful and healthy China. LEAP-HEA model was constructed to project energy demand, CO 2 and air pollutants, and assess energy transition's environmental health effects from 2020 to 2060. LMDI model was adopted to decompose the abatement contribution. Synergistic assessment index was used to estimate the coordinated abatement effects. Cost-effectiveness of energy transition and regional heterogeneity of PM 2.5 toxicity were not considered. The results indicated: (1) energy demand would decrease and structure would be optimized significantly under deep energy transition scenario. (2) Deep energy transition could promote earlier realization of carbon neutrality. It would contribute significantly to CO 2 and air pollutants abatement with strong synergistic effects. (3) Energy transition would reduce health risks with large economic benefits. Recommendations were proposed based on the conclusions. The framework of LEAP-HEA model. [Display omitted] • The synergistic abatement and health effect of energy transition were explored. • The models of LEAP, LMDI, exposure-response and the data of 2020 were used. • Energy transition would have significant synergistic abatement and health effect. • The paper has significance for promoting carbon neutrality and healthy China. [ABSTRACT FROM AUTHOR]

A gliding arc plasma has the advantages of strong reactivity, high energy density, and easy scale-up, so it is very competitive in the field of plasma-based N 2 fixation. In this work, we designed an underwater transfer arc discharge plasma N 2 fixation system based on a reverse vortex flow gliding arc. In full contact with air and water, the plasma could realize the efficient conversion of N 2 , O 2 , and H 2 O, obtaining gaseous NO, NO 2 , and activated water rich in NO x *. The experiment showed that an underwater transfer arc discharge was formed when the current was greater than 0.6 A. Under this operating condition, the conversion rate of N 2 reached 1.63%, the concentration of NO x reached 2.4%, and the production rate of nitrogen-containing products was about 3.41 mol/h. In addition, the energy consumption was as low as 2.21 MJ/mol, the lowest reported value for atmospheric-pressure rotary gliding arc plasma-based N 2 fixation. The generated activated water had abundant NO 3 − and NO 2 − ions, which could be directly applied as N 2 fertilizer in agriculture, promoting plant germination and growth. This paper describes an environmentally friendly and efficient technical route toward developing industrial N 2 fixation/green agriculture, strongly supporting the carbon neutrality concept. • A reverse vortex flow gliding arc under water was developed for N 2 fixation. • The transfer or non-transfer arc can discharge stably in air or under water. • The N 2 fixation energy consumption was reduced to 2.21 MJ/mol. • The plasma-activated water was rapid produced while N 2 fixation. [ABSTRACT FROM AUTHOR]

- The integration of multi-energy sources in microgrids offers a promising approach to address the challenges of energy efficiency and bolster environmental stewardship. This paper presents a novel optimization scheduling model for multi-energy microgrids (MEMG) with carbon capture and storage (CCS) technology in various renewable energy scenarios. The model effectively coordinates integrated demand response (IDR) and the flexible operation of waste heat utilization, enhancing energy utilization efficiency while ensuring user satisfaction. Furthermore, introducing flexible operation combined with ladder-type carbon trading minimizes operating costs and carbon emissions. The improved particle swarm optimization (PSO) algorithm is employed to solve the eco-economic economic scheduling model. Simulation analysis shows that integrating CCS into MEMG can reduce carbon emissions by 74.4%, while lowering the overall cost by 37.9%. These findings not only improve MEMG's low-carbon and economic efficiency but also pave the way for environmentally responsible energy management practices. [ABSTRACT FROM AUTHOR]

The present study explores net carbon-neutral road transport options in the EU27 in 2050 from a well-to-wheel (WtW) perspective. To this aim, three scenarios have been developed regarding the evolution of the road vehicle fleet composition in terms of the degree of electrification of powertrains, and technical measures such as vehicle efficiency improvements, transport flow, and transport volumes have been considered. The fleet scenarios are further combined with four scenarios deploying different mixes of alternative fuels in 2050, including electricity, e-fuels, liquid/gaseous advanced biofuels and remaining fossil fuel components. Two different electricity production pathways are considered, as well, one of them assuming fully renewable electricity production, and an alternative one including residual shares of nuclear and natural gas power plants plus carbon capture and storage. The Joint Research Centre's DIONE model was used for the scenario calculations. From a tank-to-wheel (TtW) perspective, each scenario reduces energy consumption, mainly due to powertrain electrification, with EU27 TtW road vehicle energy consumption in 2050 ranging from roughly 650 to 1650 TWh, which is 20%–53% of that of 2019. For the most strongly electrified fleet scenario with optimistic assumptions on measures to improve vehicle efficiency, transport flow and transport volumes and renewable electricity production, well-to-tank (WtT) energy consumption is around 110–160 TWh, depending on the fuel scenario. If a moderately electrified fleet is propelled with e-fuels, even when assuming fully renewable electricity and optimistic measures, the WtT energy consumption increases ten times or more, to 1300 TWh (2150 TWh with pessimistic measures). The results show that fleet electrification is the strongest lever for WtW transport energy consumption reduction among the options considered. Other efficiency measures contribute significantly to energy savings, but their benefit decreases with increasing fleet electrification. The production pathways of fuels make a substantial difference for WtW fleet energy requirement if the fleet is moderately electrified, in which case e-fuels require significant amounts of additional renewable electricity. Nevertheless, fuel production pathways become irrelevant from an energetic point of view under very ambitious electrification scenarios since fuel volumes become marginal. The economic feasibility and the societal acceptability of different pathways towards WtW carbon-neutrality of road transport is out of scope of this paper and requires further investigation. • The study examines well-to-wheel scenarios for 2050 carbon neutral road transport. • Electrification is the strongest driver in transport energy consumption reduction. • Vehicle efficiency and activity impacts decrease with fleet electrification. • With high fleet electrification fuel production barely impacts energy consumption. • E-fuels require particularly large amounts of additional renewable electricity. [ABSTRACT FROM AUTHOR]