Search

As the path of industrial eco-efficiency (IEE) needs to be re-examined from a multi-dimensional perspective, this research opens the internal "black box" of China's industrial eco-economic system driven by sustainable development goals (SDGs) and decomposes IEE into industrial production and sustainable development stages. It further divides the industrial production stage into two parallel subsystems of water use efficiency (WUE) and energy efficiency (EE) and derives SDG6 efficiency (SDG 6 E) and SDG7 efficiency (SDG 7 E) in the sustainable development stage respectively. The paper proposes a meta two-stage parallel entropy dynamic DDF-DEA model to re-measure IEE of 30 provinces in China from 2015 to 2021, discusses the relationship between overall efficiency and stage efficiency, and by using the Tobit model explores various types of influencing factors by subregion. The results show that the modified DDF-DEA model can explore China's IEE more accurately under SDGs. China's IEE is more stable from 2015 to 2021, with the efficiency value always fluctuating between 0.59 and 0.64, the overall level is low, and there is more room for improvement. There are significant inter-provincial differences in IEE and efficiency inertia. In more than 75% of the provinces SDG 7 E constrains IEE improvement, while the dynamic evolution of IEE and its subsystem efficiency varies across regions. Environmental regulation is a common factor affecting IEE across the country and in the east, central, and west regions, whereas the level of economic development, openness to the outside world, and urbanization rate are differential factors affecting IEE across the country and in the three major regions. This study offers new perspectives for exploring the path of IEE enhancement and providing empirical references for the collaborative construction of industrial ecological civilization. [Display omitted] [ABSTRACT FROM AUTHOR]

Hot embossing is an efficient technology for the fabrication of glass micro- and nanostructures. However, the long cycle time, high energy consumption, and high nitrogen emissions in traditional hot embossing approach hinders sustainable production of glass micro-optics. Therefore, this paper proposes a novel two-stage gravity-assisted hot embossing process that enables the fabrication of high-quality glass micro-pillar arrays in a rapid, green manner. In this approach, the two-stage gravity loading unit provides accurate force on glass preform through a simple control system, and the tailor-made heating module based on Si 3 N 4 ceramic heaters requires an energy consumption of just 700 kJ per molding cycle. As a result, the proposed approach is featured by low energy consumption and high manufacturing efficiency. In this study, the effects of the embossing temperature, force, and time on the replication accuracy of a K9 glass micro-pillar array were investigated through a series of hot embossing experiments. Afterward, the form accuracy, uniformity of microstructures, and warpage of glass replicas under the optimal process parameters were evaluated separately. Finally, repeated hot embossing experiments were conducted to demonstrate the reproducibility of the hot embossing process. The experimental results show that embossing temperature had the most significant effect on the replication accuracy of glass micro-pillars. By optimizing the process parameters, the embossed glass micro-pillars could achieve transfer ratios of 99.00% and 95.14% in height and diameter, respectively. Moreover, the surface roughness of glass micro-pillars was less than 5 nm, and the warpage amplitude of glass replicas in a 3.9 × 3.9 mm area was smaller than 1 μm. The small discrepancy in geometric features of glass replica in the repeated trails reflects the satisfactory reproducibility of this hot embossing process on the micro and nano scales. The results indicate the strong industrialization potential of the proposed two-stage gravity-assisted hot embossing machine and hot embossing process for fabricating high-quality glass microstructures more cleanly and sustainably. • A novel gravity-assisted rapid high-temperature hot embossing apparatus is developed. • A novel hot embossing process is designed for fabricating high-quality glass micro-pillar arrays in a cleaner manner. • Effects of process parameters on the replication accuracy of glass micro-pillar arrays are evaluated. • Form deviation, uniformity of microstructures as well as warpage of glass replica are analyzed. • The reproducibility in replicating geometric features in the novel hot embossing process is demonstrated. [ABSTRACT FROM AUTHOR]

This paper aims to develop an optimal real-life energy-efficient design for a production plant within the concept of the circular economy. The problem is to install a Heat Recovery System (HRS) that utilizes the hot oil used by the compressors to heat the water for the central heating system. To achieve the desired level of energy efficiency this design problem must be formulated from both the optimization and sustainability points of view. Additionally, this design problem must also consider the investment cost. In line with this purpose, this paper formulates this design problem as an optimization problem employing a mathematical programming approach as a single objective, and as a multi-objective optimization problem through a goal programming approach. Besides, this paper uses the return on investment as a key performance indicator, since it deals with a real-life design problem with an investment cost. The related design problem is solved with the single objective and multi-objective versions of the developed mathematical programming model via a commercial solver to identify different design alternatives and hence giving the decision-maker to make a selection option. Finally, the capability of the developed mathematical programming model is tested on a set of randomly generated problems. The obtained results indicate that the developed mathematical programming model is a successful decision support system since its single and multi-objective versions are capable of identifying energy-efficient production designs within the context of the real-life problem on hand and the circular economy. • A real-life energy-efficient design problem for a production plant is undertaken. • A heat recovery system is proposed within the concept of a circular economy. • The problem is modelled from both the optimization and sustainability aspects. • The problem is formulated as multi-objective models using goal programming. • The models are solved to minimize investment costs and maximize energy efficiency. [ABSTRACT FROM AUTHOR]