Search

The application of a photovoltaic (PV) system for zero energy buildings is crucial to balance energy consumption. This paper investigated the potential of PV systems for buildings in different climate zones of China. The tilt angle, orientation, plot ratio, PV conversion efficiency and location were selected to study their influences on electricity production. The performance of the PV system was analyzed based on a residential building, and employed RETScreen in combination with TRNSYS. The results indicate that southwest China is the best place to develop zero energy buildings. Low-rise residential buildings can realize zero energy in China when the PV conversion efficiency is higher than 20%. However, an energy balance only occurs in the southwest when the PV conversion efficiency is 10%. For different building heights, with a high conversion efficiency (20%), the energy consumptions rates are less than 15 kW h/m2a all over China. In the southeast, the effect of the building shape on energy generation can be ignored due to the high solar elevation angle in the summer. Although the optimal tilt angle varies for different cities, the energy deviations are less than 10% when tilt angle is within 10° of the optimal angle. This study proposed a formula to evaluate the potential of a building PV system. The maximum difference between the simulated and calculated results is approximately 10%, which is reasonable and acceptable. This paper provides some references for the application of PV systems in zero energy buildings. [ABSTRACT FROM AUTHOR]

Load matching is an inevitable problem that restricts the development of photovoltaic (PV) system used in buildings. The objective of this paper is to solve this problem by conducting a load matching assessment and optimization of PV system in different climate zones of China. The influences of the tilt angle, orientation, PV plot ratio and building height on the achievement of zero energy buildings (ZEBs) were evaluated. The PV potentials of roofs and facades were analyzed and optimized based on self-sufficiency and self-consumption. Net load variance and the maximum electricity import were employed as indices to evaluate the performance of PV systems in different climate zones of China. The results of the load matching assessment show that electricity generations from roof PV systems in low-rise buildings can meet most of the energy demand (at least 70%) in all climate zones of China. East and west facades of mid-rise buildings have an advantage over south façades in Kunming and Guangzhou in terms of load matching. It is necessary to combine roofs, south, east and west facades to meet the ZEBs requirement of for high-rise building. When the heating/cooling demand is dominant, the tilt angle should be higher/lower than the latitude of the specific location. This research will be helpful in designing building PV systems in different climate zones of China. Load matching analysis is helpful in designing building PV system in different climate zones of China. The results show that east and west facades of mid-rise buildings have an advantage over south façade in Kunming and Guangzhou. It is necessary to combine roof, south, east and west facades to meet the requirement of ZEBs for high-rise building. Image 1 • Load matching with PV system were analyzed for zero energy buildings. • PV potential were investigated based on self-sufficiency and self-consumption. • The optimal combinations of PV system were obtained in different climate zones. • East and west facades have advantages over south façade in Kunming and Guangzhou. [ABSTRACT FROM AUTHOR]