Search

The paper aims to analyse and compare the environmental performances of the most widely used cooking appliances (the induction hob vs. the gas hob) considering a typical Italian scenario in terms of food, family and social habits. Cooking appliances are subject to energy labelling, and they represent the most impacting system inside households. This study was performed in accordance with the international standard, ISO 14040/14044, by using an attributional Life Cycle Assessment (aLCA). The functional unit is defined as the “preparation of a complete homemade meal (lunch) for 20 years consumed by a four-member family in Italy”. This study shows the dominance, in terms of environmental impact, of the induction hob with respect to the gas hob for most of the selected midpoint indicators. In particular, the induction hob accounts for more than 60% of the climate change and ozone depletion impact categories and more than 70% of the metal depletion category. The same trend is also noticed in the end-point categories (human health, ecosystem qualities and resources) and for the Cumulative Energy Demand indicator. Based on the experimental evidence of this work, the use phase is the most important due to the different energy carriers (natural gas vs. electrical energy). This finding is the result of the nature of the energy carrier (the electricity grid mix) in the Italian scenario, which is mainly based on non-renewable sources. In addition, concerning the production phase of the two appliances, the induction hob shows a relevant dominance in terms of the human toxicity and metal depletion impact categories due to the use of rare metals and coppers in the cooktop part manufacturing. The outcomes obtained from this study may be used by household manufacturers to improve the performance and design solutions of their appliances as well as by end users in their selection of cooking technologies. [ABSTRACT FROM AUTHOR]

The construction sector contributes to 8% of carbon dioxide emissions, most of them caused by clinker production: in recent years, the efforts to reduce environmental impacts are growing. This paper investigates the environmental performances of clinker production and the factors driving emissions. For this purpose, the environmental impacts of 41 different grey clinkers produced in Italy from 2016 to 2021 certified by a third party according to the European standard EN 15804 have been assessed. Three input datasets (i.e., energy consumption, raw materials, and transport) have been investigated to identify the most significant variables that affected the environmental impact categories in the period 2016–2020: a stepwise regression allowed the identification of the optimal predictors to be included in the multiple regression models. The most significant variables are pet coke, fossil fuels, natural raw materials, and lorry transport. The identified models have been validated having regard to 2021 data. Therefore, for each impact category, multiple positive and negative dependencies which bear an effect on the environmental results have been quantified. The output provides proven quantitative results that can support cement producers to develop low-impacting clinker recipes. [ABSTRACT FROM AUTHOR]

The aim of Sustainable Development Goal 7 is to ensure access to affordable, reliable, sustainable and modern energy for all. Increased energy efficiency is particularly important in the construction industry because urban agglomerations currently consume up to 80% of global energy, 40% of which is attributable to buildings. In countries like Italy however, where historical buildings constitute a significant part of the building patrimony, improving energy efficiency is not always straightforward as interventions must take into account the historical materials used as well as the context of the construction. Therefore, the aim of this research was to establish a methodology that would identify the most effective means of achieving energy efficiency taking into account the historical aspects of a building and its cultural context. The methodology proposed and described in this paper involves: preliminary analyses to identify the elements of value and the level of transformability of facades; the selection of different insulating materials; dynamic simulations of building behaviour; analyses of intervention costs in relation to each type of insulation and finally the preparation of a multi-criteria matrix to identify the most effective method of improving energy efficiency of a historical wall with differing degrees of transformability. Each insulating material was analysed in relation to heating and cooling requirements and material cost impact. The methodology was applied to a case study in the Province of L'Aquila, Italy. In the paper a multicriteria framework, for the improvements in the thermal efficiency of a building, it is presented. Specifically the attention is focused on heating requirements, cooling requirements and cost impact. The results indicate that, with respect to historical building, it is possible to adopt strategies finalyzed to improve the energy efficiency of these buidings, contributing in this way, also toward the SDG7. Specifically, the best performance for a wall with a high level of transformability can be obtained using calcium silicate, extruded polystyrene, kenaf and hemp, whilst, in the case of a wall with a low level of transformability, the best materials are calcium silicate, polyurethane and linen fiber. Finally, in the case in which external constraints prevent the application of a thick coat and internally there is limited space, the use of calcium silicate was found to be the best energy efficient measure. [ABSTRACT FROM AUTHOR]

Abstract: In this paper a Life Cycle Assessment (LCA) of protected crops was carried out. In particular, energy and environmental performances of peppers, melons, tomatoes, cherry tomatoes, and zucchini in different typologies of greenhouses (tunnel and pavilion) were assessed. The study aimed at assessing the ecoprofile of each product and the share of each life-cycle step on the total environmental impacts. The related process flow chart, the relevant mass and energy flows and the key environmental issues were identified for each product. Collection of primary data was conducted by means of a detailed questionnaire distributed to a producer company in southern Italy. The analysis was developed according to the LCA standards of the ISO 14040 series. The results showed that for all the examined vegetables the packaging step and the greenhouse structures have a relevant share in the environmental impact distribution. Further tunnel and pavilion greenhouses are characterized by comparable ecoprofiles and both of them are characterized by lower energy consumptions than greenhouses in the North of Europe, due to the non-use of auxiliary heating systems in the former. [Copyright &y& Elsevier]

In the face of ever more ambitious global energy challenges, the European Union has set striving climate targets for 2030, planning to increase renewable energy penetration in the electricity generation as a key measure towards a clean energy transition. To respond to the challenge of keeping the increase in power sector costs, that inevitably arises when a profound reconfiguration of the electricity generation sector is expected, to the lowest possible, this paper aims to quantify the economic burden associated with the reduction of direct CO 2 emissions through a comparative assessment of various alternatives proposed for 2030 ranked in terms of their cost-effectiveness. A sensitivity analysis is also applied to the main economic and energy parameters that make up CO 2 mitigation costs to include those uncertainties that characterise future projections. The impact of electricity generation shares on CO 2 mitigation costs is assessed thus providing a basis for the definition of alternative configurations for the Italian electricity sector capable to achieve the desired environmental performance with a limited economic impact. Finally, results reveal that those scenarios based largely on natural gas and solar source are characterized by high mitigation costs, while energy efficiency is essential for a virtuous and clean electricity sector along with the use of all available sources in appropriate shares, both renewable and non-renewable, to pursue the highest environmental objectives in a cost-effective manner. Although related to the Italian case, the methodology provided in this study can be applied to any other electricity sector to ultimately evaluate the economic burden arising from possible different configurations. • Comparative analysis of scenarios for decarbonising electricity supply in Italy. • European Union Commission and National Energy Strategy projections are reviewed. • Costwise, coal phase-out is not as beneficial as other proposed configurations. • Energy efficiency is key to low-cost and highly beneficial environmental objectives. • High mitigation costs occur with large gas consumption and solar generating capacity. [ABSTRACT FROM AUTHOR]

The aim of this paper is to provide an overview about the distribution of the environmental impacts arising from different domestic functions (i.e. storing and preparing food, washing dishes, watching television, reading, personal cleaning, washing, drying and ironing clothes, home cleaning, heating, cooling, lighting and mobility) typically performed within a common family home. The method has general validity but for reasons related to the availability of data in the literature it has been applied by way of example only in three EU countries: Italy, Germany and France. The study was performed by using Life Cycle Assessment (LCA) in accordance with international standard ISO 14067 for determining the carbon footprint of different alternative domestic components, mainly appliances, for each function, by exclusively exploiting data from scientific literature. The functional unit is defined comprising all most common referred domestic activities of a family of three members within a house of 100 m2. The study identified an optimal configuration and a worse one of the domestic components in terms of carbon footprint, showing how a wise choice of these can greatly affect the overall impact by reducing it compared to the worst by more than 22% in Italy, 45% in Germany and 56% in France. The average impacts between the optimal and the worst configurations of Germany are higher than Italy (+27%) and France (+44%). Considering the impacts among the domestic functions in the average configuration, mobility was the most impactful in all the three countries (35–48%), followed by heating (17–26%), personal cleaning (10–13%) and washing dishes (8–13%), while cooling is consistent only in Italy (13%), against 5% in Germany and 2% in France. The study also allowed to identify some generic criteria for defining the optimal configuration: the increasing in energy efficiency, the choice of the least impacting energy source depending on the geographical location, ensuring water savings and the early replacement of older domestic components. Finally, by comparing some common measures for improving the domestic sustainability, these criteria proved to be more effective than solar systems and improved electricity mix. The provided outcomes may be used by manufacturers for improving their product in a more sustainable way as well as by legislator and end user, respectively for boosting and choosing the greener domestic components. Image 1 • LCA for estimating domestic environmental impacts based on scientific literature. • Application to three EU countries: Italy, Germany and France. • Assessing Carbon Footprint of different alternative domestic components for each domestic function. • Determining the optimal and the worst configuration of domestic components to minimize the impacts. • Comparing possible improvements for minimizing carbon footprint. [ABSTRACT FROM AUTHOR]