Search

Transnational power cooperation contributes to promoting the large-scale use of renewable energies in Asia, but how to develop the structure of power transmission network deserves careful investigation. This paper thoroughly investigates the structure of power investment and transmission network in China and neighbouring countries, aiming to promote the large-scale use of renewable energies around Asia. Various power-generation and power-transmission technologies are considered in detail, and transnational power interconnection risk cost and carbon emission cost are embedded into a bottom-up optimization model. The future power-generation structures and networks installed under various policy scenarios are analysed in detail, and the corresponding economic, carbon emission reduction and renewable energy consumption benefits are evaluated. The results show that power transmission between China's internal regions and neighbouring countries can save $56.7 billion for the entire power system through the large-scale grid integration of renewable energy. The installed capacities of wind power, solar power, and hydropower renewable energy power generation could be increased by 141 GW, 163 GW, and 58 GW, respectively. The construction of transnational transmission lines from Central Asia to Northwest China, Mongolia to North China, the Russian Far East to Northeast China, and Northeast China to South Korea could effectively promote the utilization of renewable energy in the Russian Far East, Mongolia and Central Asia and further reduce carbon emissions in China, Japan and South Korea. • It examines how to construct a power investment and transmission network in Asia. • Various technologies, risks and costs are considered based on bottom-up model. • Huge benefits exist for power transmission between China and neighbouring countries. • Various power-generation structures and networks installed are analysed in detail. • Suggestions about power investment and transmission are given for Asian countries. [ABSTRACT FROM AUTHOR]

The increasing contribution of refrigeration systems to global warming has led to widespread demand for low global warming potential (GWP) refrigerants as alternatives. This paper proposed a comprehensive environmental assessment method for evaluating the carbon footprint of units charged with low-GWP refrigeration. Experimental and numerical studies were used to investigate the carbon footprint impact of using alternative refrigerants at different ambient temperatures in China. Initially, the model was validated through experimental case studies on the use stage of cold storage units. Subsequently, a comparison was made between the cooling capacity (CC) and energy efficiency ratio (EER) of cold storage units charged with different refrigerants. Additionally, the impact of alternative refrigerants in the use stage was analyzed by numerical calculations, and the adaptability of the cold storage unit to the ambient temperature and the national energy structure was also studied. The results indicate that among the four stages of the cold storage unit, the use stage is the hotspot of carbon footprint due to the large amount of energy consumption and the existence of refrigerant leakage and other behaviors. Utilizing low-GWP alternative refrigerants could significantly reduce the carbon footprint of the cold storage units' use stage by 10.56%–16.39%, thereby lowering the whole stage carbon footprint. Furthermore, the ambient temperature and national energy structure could also effectively reduce the carbon footprint of cold storage units' whole stage by 1%–27.17%. Furthermore, after adopting low GWP refrigerants, the life-cycle cost (LCC) of the units have also decreased by 6.1%–12%. Taking into account both environmental impact and economic considerations, it is recommended to directly replace R404A with R448A in the units in regions where the average ambient temperature is above 15 °C. • A carbon footprint evaluation model for the units was established. • Influencing factors of carbon footprint are studied numerically and experimentally. • By GHG assessments, the optimal refrigerant and external conditions were determined. • Alternative refrigerants reduce carbon emissions for cold storage units by 8.8%–24.92%. [ABSTRACT FROM AUTHOR]

Meeting energy needs and ensuring ecological sustainability are important tasks for policymakers. In particular, changing the energy mix used in daily electricity generation can have a major effect on ecological conditions, and this is a previously neglected research topic. Therefore, this paper aims to investigate the influence of daily electricity generation from nuclear power and renewables on the achievement of carbon neutrality targets in the four largest nuclear power countries (i.e., the U.S., China, France, and Russia). The study applies the wavelet-transform coherence (WTC), quantile-on-quantile regression (QQR), and Granger causality in quantiles (GCQ) approaches for the period from January 2, 2019 to December 29, 2022. The outcomes present that electricity generation from nuclear energy reduces carbon (CO 2) emissions only in Russia, while hydropower generation does not contribute to CO 2 emission reduction in any country. Solar electricity generation decreases CO 2 emissions in different quantiles in the U.S. and Russia, while electricity generation from wind power reduces CO 2 emissions in the U.S. and France. The empirical outcomes also reveal that expanding solar, wind, and nuclear power in the energy mix can enhance the potential of the U.S., France, and Russia to achieve carbon neutrality and secure a sustainable future. However, China is using nuclear and renewables inefficiently regarding carbon neutrality. Therefore, the empirical evidence for China is highly controversial compared to former studies. [Display omitted] • The study examines renewable and nuclear electricity effect on carbon neutrality. • The study focuses on top four major nuclear power countries. • The study applies nonlinear approaches by using high-frequency (daily) data. • Renewable and nuclear electricity have time, frequency, & quantile-varying effect. • The best electricity source change according to each country. [ABSTRACT FROM AUTHOR]

The metallurgy industry plays a very important role in China's economic growth. Due to its energy concentration, the energy consumption of the industry accounts for a large proportion of China's total energy consumption, and thus contributes to carbon emissions. Whether the metallurgy industry can successfully reduce emissions is related to the future of China's carbon emissions targets. In this paper, the logarithmic mean Divisia index model is used to analyze the change in China's carbon dioxide emissions from 1991 to 2014. The empirical results show that there are three main factors affecting the carbon dioxide emissions of China's metallurgy industry. The three factors are labor productivity, energy intensity and industry size. In addition, we further analyzed the deep motivation of carbon dioxide emissions in the industry, and calculated the future emission reduction potentials. Lastly, according to the empirical results, the paper proposes policy recommendations for the future emission reduction of China's metallurgy industry. [ABSTRACT FROM AUTHOR]

The construction industry is one of the most energy-intensive industries in China, which contributes to high carbon emissions and hinders efforts to reduce the emissions. The high energy consumption and emission have seriously constrained the growth of low carbon economy in China's construction industry. And reducing the carbon emission from construction industry (CECI) has become the key to sustainable development and the achievement of "double carbon target". The paper firstly decomposes the main influencing factors and calculates their effects by LMDI model. Then, the Tapio decoupling index is used to explore the decoupling relationship between carbon emissions and economic output. Finally, the spatial-temporal evolution of carbon emissions is analyzed through spatial autocorrelation theory. The results show that the carbon emissions from construction industry are highly increased by the construction employment rate (EM), and may be reduced by the energy intensity (EI) and carbon emission efficiency (CI). And the regions with better decoupling status are the eastern and central regions, which have relatively developed construction industry. Moreover, the spatial-temporal characteristic of carbon emissions is "high in the east and low in the west, high in the south and low in the north," showing obviously regional differences. [Display omitted] • Factors about production technology are taken into account, reflecting the characteristics of the construction industry. • Developed regions have better decoupling potential and more responsibility for CO 2. • The spatial distribution is "high in the east and low in the west, high in the south and low in the north". • The provinces in a region have similar decoupling status and carbon emission distribution. [ABSTRACT FROM AUTHOR]

Energy Internet (EI) is typically characterized by digitalization and clean energy that seeks to revolutionize the energy system and reduce carbon emissions. Even though several scholars conclude that EI accelerates the clean energy transition of energy system, since the controversial relationship between digitalization and energy consumption in academia, current studies on the carbon emission reduction advantages of the EI are still in dispute. This paper employs the effect of EI's construction on the carbon emission peak goal of China's energy system based on the system dynamics model and different scenarios. The simulation results find that: (1) the construction of the EI could enable China's energy system to meet the carbon reduction commitment in 2028, with a carbon emission peak of 11.61 billion tons; (2) As digitalization and clean energy become more extensively employed, rising energy demand is satisfied by the manner of consuming low-carbon electricity energy. This is thought to be the primary factor that could promote China to achieve the carbon peak goal earlier than expected; (3) The advancement of digitalization has further promoted the decoupling of China's economic growth from carbon emissions. It is projected that China's energy system will still achieve the carbon peak goal by 2030 when the expected annual GDP growth rate is increased to 6.32%, 5.75%, and 4.6% for the years 2020–2025, 2026–2030, and 2031–2035, respectively. These findings might provide a new perspective for quantitative research on the environmental outcomes of the EI and the relationship between environmental improvement and economic growth. [ABSTRACT FROM AUTHOR]

To perform better future trend prediction for an economy-energy-environment (3E) system and address the shortcomings of traditional multivariate grey models, this paper introduces a spatial correlation term into the multivariate discrete grey model, thus creating the SLDGM(1,n) model, and improves the final calculation of the model according to the priority of new information. The validity of the SLDGM(1,n) model is assessed using data from the 3E system in North China, and the SLDGM(1,n) model is applied to predict the future trends of the 3E system in North China. The following conclusions are obtained. First, the introduction of the spatial correlation term and the improvement of the final calculation method are reasonable; the prediction accuracy of the multivariate grey model is improved, and multiple systems are modeled simultaneously. Second, the SLDGM(1,n) model calculates the spatial spillover effect, and according to the simulation results for North China from 2010 to 2019, Hebei's energy consumption and carbon emissions are subject to the largest influence from other provinces, while its economic development level is subject to the smallest influence, and the carbon emissions of Shanxi and Inner Mongolia are subject to a negative spatial influence effect. Third, the prediction results indicate that under the effect of spatial correlation, the energy consumption of all five provinces in North China will continue to rise; the carbon emissions of Beijing will gradually decline while the carbon emissions of the other four provinces will all gradually rise, and the per capita GDP of the five provinces is expected to increase by more than 50% by 2025. [ABSTRACT FROM AUTHOR]

The Yangtze River Delta region is one of the key areas of energy transition for China's carbon neutrality. The pathways to carbon neutrality are diverse in the regional level due to the different conditions on the energy supply and demand side. How to construct comprehensive assessment index system and evaluate regional pathways to carbon neutrality is an urgent problem to be solved. To fill this gap, this paper evaluates the carbon neutrality pathways of supply-side and demand-side coordination in the Yangtze River Delta region using the Low Emissions Analysis Platform with five scenarios (64 sub-scenarios): Business as usual, energy intensity decrease, energy structure reform, power supply technology innovation and policies mix. The simulation results indicate that: (1) 22 of the 64 sub-scenarios can achieve carbon neutrality by 2060. (2) In energy intensity decrease scenario, an annual 6% reduction in energy intensity could achieve carbon neutrality before 2060. (3) The policies mix scenario can lead to 21 sub-scenarios with pathways to achieve carbon neutrality when the average annual energy intensity decreases by 4% or more. Additionally, the end-use sectors electrification level should reach 64.19% at least by 2060. (4) There can be 14 sub-scenarios to achieve zero carbon emissions in the power plant sector, but annual energy intensity should be reduced by at least 4%. Applying Analytic Hierarchy Process analysis, the article evaluated the 22 sub-scenarios with the index of regional pathways to carbon neutrality. The result shows that the mixed policies of energy intensity reduction, energy structure reformation and power technology innovation can promote the coordination of supply-side and demand-side. This study can provide reference for policymakers to formulate effective policies to realize carbon neutrality. • The coordination of energy supply and energy demand is assessed. • A model with five scenarios (64 sub-scenarios) is developed for carbon neutrality. • Energy intensity drops by 4% or more can lead to multiple carbon neutral pathways. • A comprehensive assessment index of regional carbon neutral pathways is developed. [ABSTRACT FROM AUTHOR]

Nowadays, China's economy and energy structure are deeply adjusting to the direction of low-carbonization and non-carbonization with unprecedented efforts. This paper considered carbon emissions and energy endowments, adopted SBM-Undesirable model and spatial Durbin model to calculate the energy efficiency of 30 provinces and municipalities in China from 2015 to 2019 and analyze the direct effect, indirect effect and total effect on energy efficiency of 7 variables. Empirical results show that: Energy efficiency has spatial positive correlation and agglomeration characteristics; The main influencing factor of China's energy efficiency is energy consumption structure; Regions with strong energy endowment bear the environmental pollution cost of energy consumption areas in China; Environment Kuznets Curve (EKC) exists in China, but different provinces and municipalities are distributed in disparate stages; Research and development (R&D) investment only affects local energy efficiency, and has no spillover effect on surrounding areas in China; Foreign direct investment (FDI) has negative impacts on China's energy efficiency, and there is a phenomenon of pollution paradise. The valuable conclusions obtained in this study deepens the insights about the influencing factors of China's energy efficiency under the constraints of carbon emission and energy endowment. Energy efficiency has spatial positive correlation and agglomeration characteristics; The main influencing factor of China's energy efficiency is energy consumption structure; Regions with strong energy endowment bear the environmental pollution cost of energy consumption areas in China; Environment Kuznets Curve (EKC) exists in China, but different provinces and municipalities are distributed in disparate stages; Research and development (R&D) investment only affects local energy efficiency, and has no spillover effect on surrounding areas in China; Foreign direct investment (FDI) has negative impacts on China's energy efficiency, and there is a phenomenon of pollution paradise. [Display omitted] • Energy efficiency has spatial positive correlation and agglomeration characteristics. • Energy consumption structure mainly affects energy efficiency. • Environment Kuznets Curve exists in China. • "Pollution paradise hypothesis" exists in foreign direct investment. • Environmental pollution is transferred to surrounding provinces through resource trades. [ABSTRACT FROM AUTHOR]

Ammonia is a very important chemical industry product. It has a wide range of applications in refrigeration, energy, and fertilizers, and 80% of ammonia is used as a nitrogen fertilizer. China mainly produces ammonia and urea from coal gasification, which leads to difficult CO 2 capture and high energy consumption. This study proposed a new process for the production of ammonia and urea by coal direct chemical looping hydrogen production process (CDCLTU). The coal direct chemical looping hydrogen production replaces the air separation unit and water gas conversion unit of the traditional coal-to-urea process (CTU), which effectively separates and captures CO 2 and significantly reduces the energy consumption. A model of the CDCLTU was established using Aspen Plus. Parameter optimization, technoeconomic, and environmental analysis were conducted through simulations. The results showed that CDCLTU could completely replace the air separation system that the CTU relies on. Compared with the traditional process, the utilization rate of C increased from 53.46% to 67.95% in the new process. The energy consumption of CO 2 separation and capture was reduced by 97.04%. The CDCLH had a 79.7% energy efficiency in the hydrogen production process and 99% capture rate of CO 2. The total capital investment was dropped by 41%, unit urea production cost dropped by 12.1%, and the payback period dropped from 7.5 to 3.5 years. This paper provides a new direction for clean and efficient utilization of coal resources. [Display omitted] • Proposed a novel coal-to-urea process by chemical looping technology. • Conducted main parameters optimization and performance analysis for the new process. • The new process reduced 97.04% energy consumption of CO 2 separation and capture. • Production cost of the new process is 12.1% lower than that of the conventional process. • The new process achieved 67.95% C utilization rate and 1.39 t/t lower CO 2 emission. [ABSTRACT FROM AUTHOR]

Since the combustion of fossil fuel became the largest contributing factor of greenhouse gas emissions in China, the growth of energy consumption caused by urbanization has led to significant increase in carbon emissions. Applying both the carbon-emissions-coefficient and the sector-energy-consumption method, we predicted the energy consumption and carbon emissions, explored the characteristics of energy consumption and carbon emissions in different urbanization stages, and analyzed the energy crisis in Shandong which is a typical province in China. The results indicate that in 2015 and 2020, the total primary energy consumption will be 1.57 times and 1.85 times higher than that of in 2009, and the carbon emissions are estimated to be 1.48 times and 1.67 times respectively. The urbanization has distinct positive effects on energy consumption and carbon emissions, and the influence is more obvious in the intermediate-stage than in the early-stage. From a policy perspective, this paper could provide valuable information for planners and decision makers to formulate feasible and practical polices with a view to optimize energy structure and mitigate carbon emissions. [ABSTRACT FROM AUTHOR]

Achieving the peak of carbon dioxide (CO 2) emissions requires a large amount of green and low-carbon investment. Whether the green finance system can efficiently support the capital need for achieving the CO 2 emissions target in the context of the COVID-19 epidemic is a matter of concern. This paper constructs a system dynamics model (SD model) to illustrate the quantitative relationship between the green finance system and CO 2 emissions and introduce the COVID-19 epidemic as a variable to analyze ten simulation scenarios regarding the carbon emissions commitment realization under different green finance and economic growth status. It is shown that: (1) Regardless of the impact of COVID-19, China can meet its commitment by reaching its CO 2 emissions peak in 2030 and realizing a 20% non-fossil energy proportion in 2025; (2) Under the impact of the epidemic, the goal can not be obtained in all energy consumption scenarios when the government expenditure on the environment is low. The target year of reaching CO 2 emissions peak becomes 2033, 2037, and 2040. The results indicate that reducing government expenditure on environment protection makes the CO 2 emissions peak target less likely to be achieved within a given time frame. We also concluded with important policy implications according to the result of the simulations. Overall, this study makes a reference for other economies and researchers to quantitatively predict the interaction relationship between the green finance system and CO 2 emissions in the context of COVID-19, which provides policymakers with insights into a joint power of energy consumption upgrading and green capital guidance. • Providing empirical studies regarding the mechanism of the inhibitory effect of green finance on CO 2 emissions. • Using systems dynamics model to address the missing data problem. • Making solid suggestions under COVID-19 Epidemic. • Building the relationship between the green finance system and CO 2 emissions and making forecasts for "3060" mission result. [ABSTRACT FROM AUTHOR]

The increasing energy and material consumption associated with global economic growth has resulted in the need for more severe efforts at mitigating global climate change. The iron and steel industry consumes 8% of energy and emits 7% of total CO 2 globally. China's iron and steel industry contributes to 15% of that country's total CO 2 emissions. Therefore, there is an urgent need to explore the possibility of net zero emissions in the iron and steel industry in China to meet China's goal of carbon neutrality before 2060. In the study presented in this paper, the MESSAGEix–China iron and steel model was developed by integrating the process-based technology of the sector into the IIASA's MESSAGEix framework to explore zero CO 2 emission pathways and their associated impacts on resources, energy, and water in China's iron and steel industry up to 2100. We found that there are multiple pathways to achieving zero CO 2 emissions in the Chinese iron and steel industry by the end of the 21st century. More specifically, in all the pathways developed in this study, CO 2 emissions decreased significantly between 2030 and 2060 due to the rapid application of 100% scrap-based Electric Arc Furnaces (EAFs) and hydrogen-based Direct Reduced Iron (DRI)-EAFs steel-making technologies. However, by 2060, there will still be 70–360 Mt of CO 2 emissions from China's iron and steel industry; consequently, carbon sink or negative emission technologies are required to offset this and achieve the country's carbon neutrality goal. Furthermore, technologies for achieving zero emissions differ widely in terms of their impacts on the consumption of materials and energy. Compared to the electric (ELE) scenarios, 25–40% of extra iron ore is consumed in the current and new national policy (NPS) scenarios and the DRI scenarios, but 25–220% of scrap is required. At the same time, 20–150% more energy will be saved in the ELE scenarios than in the NPS and DRI scenarios. Finally, we recommend that policy makers design a cross-cutting strategy to achieve zero CO 2 emissions and enhance efforts for material recycling and the provision of clean energy and water. • There are multiple pathways to achieving net zero emissions in China's iron and steel industry. • Steel outputs are essential for reducing CO 2 emissions and conserving materials, energy, and water. • Hydrogen-based DRI and 100% scrap-EAFs technologies are key to achieving zero emissions. • CO 2 mitigation measures have limited impacts on water consumption. [ABSTRACT FROM AUTHOR]