Search

This paper profiles Australian universities’ website communications about sustainability initiatives, especially relating to Talloires Declaration signification and the ten recommended actions. The research involves a content study of Talloires signatories’ websites and their semiotic and signaling theory aspects across time. The source is publicly available information (time period 2014 and 2015 respectively) in context with education for sustainable development (ESD) in society and the transaction model in communication theory. It is found that some of the signatory universities in Australia exemplify a few of the Talloires ten agreed actions in their public communications, but each point is not emphasised with equal priority. The variance may be due to divergent underlying objectives; such as public communication of Talloires toward genuine benefit for the environment, or to create a strategic positioning tool to signal the university as an environmental champion within the broader society. Focusing upon secondary data from signatory university websites in Australia, the paper provides a study of higher education signification of Talloires. It assists the initial understanding of signaling theory in the public communication transactions that promote Talloires action and implementation. The findings encourage further studies of related communication issues in universities in other countries. The paper also deepens local and global understanding of perceptions of sustainability and contributes to the body of comparative literature of sustainability in higher education as a development component of strategic management of ESD. [ABSTRACT FROM AUTHOR]

Carbon reduction has become one of the most significant challenges for economic growth. This paper presents the preliminary analysis of undesirable output reduction targets and emission schedules in temporal–spatial comparisons based on Data Envelopment Analysis. The reduction targets of undesirable outputs are investigated, including the maximum, input, technical and ideal reduction targets. Four Data Envelopment Analysis models that are based on a sequential benchmark technology and variable returns to scale are introduced to measure these reduction percentages. In order to formulate the optimal emission schedule of undesirable outputs, an optimal model is provided without inflation. Data from the Australian construction industry from 2000 to 2010 are employed to develop the models. The results of the analysis indicate that the Australian Government could achieve its promised carbon reduction targets in the construction industry. Most Australian regions' construction industries possess carbon mitigation potential and some of them could increase their desirable outputs if carbon were decreased. This paper suggests that policymakers can benefit from formulating various suitable undesirable output reduction objectives and schedules through the models developed. The research method can be replicated for other sectors and regions focussing on undesirable output reduction. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents the method and results of a survey of 27 of the 33 Australian universities teaching engineering education in late 2007, undertaken by The Natural Edge Project (hosted by Griffith University and the Australian National University) and supported by the National Framework for Energy Efficiency. This survey aimed to ascertain the extent of energy efficiency (EE) education, and to identify preferred methods to assist in increasing the extent to which EE education is embedded in engineering curriculum. In this paper the context for the survey is supported by a summary of the key results from a variety of surveys undertaken over the last decade internationally. The paper concludes that EE education across universities and engineering disciplines in Australia is currently highly variable and ad hoc. Based on the results of the survey; this paper highlights a number of preferred options to support educators to embed sustainability within engineering programs, and future opportunities for monitoring EE, within the context of engineering education for sustainable development (EESD). [Copyright &y& Elsevier]

Abstract: Metal finishing, as an industry, has had a vexed history with the environment and regulatory authorities over many decades throughout the world. Over the past 20years, this situation has been vastly improved in some developed countries. This paper will examine the industry''s recent progress in Australasia and highlight specific issues including new technologies adopted, research projects undertaken, responses to Government legislation and education. Many toxic chemicals have been replaced, recycled in closed loop scenarios and prevented from entering the environment via the atmosphere, water ways or landfilling. This paper is written as a qualitative industry summary rather than an academic study. It is meant to highlight the major changes that have occurred and the reasons why, rather than present documented and detailed evidence. The author has drawn on his 35years experience in the industry as well as many experienced colleagues from around the world. Although the geographic scope is Australasia, many comments emanate from the state of Victoria because it is still the manufacturing base, especially in relation to the auto industry that has affected the changes to a large degree. [Copyright &y& Elsevier]

Traditional glass bottles are the wine industry's major source of carbon emissions. Those wishing to reduce the carbon footprint embedded in wine have been looking to alternative packaging, such as PET, aluminium cans, and bag-in-box (BIB) to mitigate the impact. However, these alternative formats pose challenges with consumer acceptance and knowledge of the eco-benefits of each format. This paper uses a discrete choice experiment and latent class analysis to investigate the possible effects of message content and style (abstract vs concrete) on wine purchase in the context of brand size, brand prestige, and pricing. The analysis reveals the presence of two customer segments, which highly emphasise the pack format. Of the four non-glass packs tested, BIB and flat glass lookalike PET bottles score the highest preference after glass bottles. Message content and appeal type score low in their ability to alter preferences, whilst mid-to-low prices increase the chances of alternative packaging to be chosen. • Packaging format is a key choice driver for wine. • Glass is still the most preferred packaging format. • Bag in Box and low-carbon alternatives that look most like glass have the most potential for uptake. • Message content and appeal have little impact on choice. • Alternative packaging is more likely to be chosen for mid-to-low-priced wines. [ABSTRACT FROM AUTHOR]

In this paper we use a form of discourse analysis to explore the ‘activity’ that three quite different sustainability reports set up as companies communicate their social and environmental performance. Our aim is to show what sustainability reports ‘do’ – in order to offer insights about what they ‘could do’. We show that the companies are using sustainability reporting strategically, and that sustainability is embedded in to the company's strategic priorities. Where they mostly narrate and argue a point of view, sustainability reporting can offer additional benefits by transiting towards dialogue. Dialogue provides stakeholders with the means to engage substantially with companies, and also introduce new discourses that may open up new directions in how companies contribute to sustainability. [ABSTRACT FROM AUTHOR]

Despite considerable mitigation efforts, global emissions from the electricity sector continued to grow in recent years. In Australia, the electricity sector is the largest CO 2 -emitting industry, contributing 35% of the country's total greenhouse gas emissions. The Australian government targets an 80% reduction of greenhouse gas emissions by 2050 relative to 2010. With a large variety and quantity of renewable energy resources, it is technically feasible and seems indispensable that Australia's electricity sector be largely decarbonised by 2050 in order to achieve this target. In this paper, scenario-based hybrid Life-Cycle Assessment is applied to calculate the economy-wide carbon footprints of seven electricity generation technologies in scenarios with differing renewable electricity penetration. This work is the first to apply a full life-cycle approach to scenario analysis of electricity generation in Australia. The findings are at the higher end of previously reported carbon footprint intensity ranges and above median values. However, even when taking into account indirect emissions along the technologies' life-cycles, the results indicate that the employment of different renewable energy technologies can potentially save a considerable fraction of Australia's greenhouse gas emissions. This makes renewables an essential option for climate change mitigation. [ABSTRACT FROM AUTHOR]

Abstract: This paper presents the results of the cradle to retailer or quick service restaurant gate life cycle assessment (LCA) of chicken production by Inghams Enterprises, a major poultry producer in Australia. The aim of this study was to identify environmental hot spots in order to reduce impacts and costs, improve products, processes and supply chains for Inghams. Of specific interest to Inghams was the comparative environmental impact of conventional and free-range chicken production. Foreground data were obtained from Inghams'' internal and external reports and guidelines for litter emission factors; background data were sourced from the Australian and international databases and modeled in the SimaPro software. The life cycle impact assessment includes 12 environmental impact categories (abiotic resource depletion; acidification; eco-toxicity; eutrophication; global warming; human toxicity; ionizing radiation; land transformation and use; ozone depletion; photochemical smog; respiratory effects; and water depletion), characterized at midpoint, normalized per capita Australia and weighted into Australian ecopoints for overall impact. The ecopoint scale is that 100 points equal the average Australian''s annual weighted impact. Allocation of impact between co-products was based on the associated economic wholesale price of roast chicken and breast fillet in relation to the average overall production output value. The allocated impact per product was calculated to 11.4 and 12.4 ecopoints per ton of roast chicken and 35.2 and 33.4 ecopoints per ton of breast fillet for free-range and conventional production respectively. Upstream feed production is the largest impact area of the chicken meat supply chain, contributing approximately half of the overall impact and two thirds of the overall water consumed for chicken meat. Poultry farm operation contributes approximately one third of the overall impact, primarily from manure emissions and energy used in chicken housing, and over half of non-renewable energy consumption. Meat processing is the third largest impact source with approximately 10% of the overall impact. All other life cycle stages, including feed mill operations, hatcheries, packaging and distribution combine to less than 10% of the overall impact. The results highlight the importance of productivity measures, such as feed conversion ratio (FCR), energy efficiency and clean energy provision for facility operations, but also adoption of low-impact agricultural practices downstream from Inghams'' operations. Several LCA studies of poultry production and products have been published. The most common unit for comparison is the calculated life-cycle global warming potential, typically assessed from cradle to farm gate or retail. Often sufficiently detailed information of the assumptions behind meat processing and allocation approach is missing in cradle to retail or consumer studies. Attempts to benchmark the study results emphasized the need for a consistent and level playing field methodology for the food sector in order for LCA to provide meaningful and reliable input into businesses decision-making and for product comparisons. [Copyright &y& Elsevier]

Abstract: This paper presents a time-series Life Cycle Assessment (LCA) approach to examine the historical environmental impacts associated with copper mining and smelting in Australia from 1940 to 2008. It uses cradle-to-gate LCA models to estimate impacts from the five largest Australian copper mines, incorporating changes in ore grade and differences in technologies and regional energy sources. Using copper as an example of the different life-cycle impacts of metals, this study demonstrates the influence of both temporal and spatial factors. For mine/smelters, results show that the carbon footprint of copper produced at all sites over the time period investigated ranges from 2.5 to 8.5 kg CO2-eq./kg Cu and the difference between different locations in any given year can be up to 6 kg CO2-eq./kg Cu. The estimated impact potentials derived from the LCA models for Australia''s largest mine/smelter at Olympic Dam are then compared to impacts reported by mine operators for global warming potential and acidification. The results of the LCA analysis indicate the importance of considering time-varying parameters and highlight an opportunity to use LCA models more broadly for assessing future technology and energy options in the mineral sector. [Copyright &y& Elsevier]

Abstract: The concept of ‘peaks’ in the production of natural resources has attracted attention in the area of energy production, with concerns about ‘peak oil’ driving recent research and investment in alternative sources of energy. There are fundamental and important differences between a peak in the production of oil and peaks in the production of metalliferous minerals, but in both cases production changes from ‘easier and less expensive’ early in a resource’s life to ‘difficult and expensive’ as time progresses. The impacts of this change in production circumstances require critical consideration in the governance of national and sub-national mineral endowments. This paper develops a framework for evaluating the impacts of changing patterns of mineral production. The framework considers three criteria: availability of a resource (considering its geological characteristics and geographical distribution); society’s addiction to the resource (its centrality and criticality to economic, social and environmental systems); and the possibility of finding alternatives (whether the resource can be substituted or recovered). An initial assessment against these criteria provides an overview of how a production peak might affect the production of minerals in Australia and the impacts that this might have on the Australian economy. Assessing important resources against these three criteria will be imperative in future considerations regarding the roles minerals and metals play as service providers in our economic, social and environmental systems. Additionally, this analysis should prompt a reassessment of the value of minerals beyond economic measures. Indicators derived from these criteria will inform strategies that can address future changes in production characteristics – meeting challenges with strong governance, and realising opportunities with proactive policy. [Copyright &y& Elsevier]

Abstract: Environmental problems have been considered to be serious in the construction industry. Waste management pressures are pressing very hard with alarming industrial warming signals. Among the different types of construction and demolition wastes, concrete is about 81 percent of the volume of construction and demolition waste in Australia. To minimize the concrete waste generated from construction activities, recycling of concrete waste is one of the best methods to improve the environment. However, situations of concrete recycling in different countries vary considerably. Japan is a leading country in recycling concrete waste, with 100 percent recycling of the wastes that are used for new structural applications. This paper investigates the current concrete recycling situations in Australian and Japanese construction industries. A questionnaire survey and structured interviews were conducted. In comparing the current concrete recycling situations between Australia and Japan, it should be noted that major difficulties found from Australian and Japanese construction industries are on different phases of the transition to recycling of construction wastes. Therefore, it is suggested that the Australian construction industry should be: i) developing a unified policy in concrete recycling; ii) providing financial governmental support; iii) developing clear technical specifications or standards on the use of recycled aggregate for structural applications. [Copyright &y& Elsevier]

Abstract: This paper presents relevant data for industry and governmental policy makers with the aim of increasing the recycling rate of end-of-life copper and zinc in Australia in a technically and economically feasible way. The methodology used to quantify and spatially distribute end-of-life flows of copper and zinc is based on existing and anticipated in-use stocks, their residence times, and their historical and anticipated future evolution. Australia currently (ca. 2000) generates about 72Gg/year and 57Gg/year of end-of-life copper and zinc, respectively. Some 70% of all discarded copper and 40% of all discarded zinc generated in Australia are currently being recycled. A detailed assessment shows that about 75% of all end-of-life material in Australia comes from the three states New South Wales, Victoria, and Queensland. In Australia, about 70–75% of waste copper and waste zinc is generated in urban areas. Residential applications account for about 40% (copper) and 60% (zinc) of the generated discards; commercial and industrial applications account for the remainder. By 2030, the discard flows are predicted to increase by about 105% and 155%, to 150Gg Cu/year and 145Gg Zn/year, providing substantially increased opportunities for recovery and re-use. Priority targets for the improvement of copper and zinc recycling in Australia are buildings under renovation, urban infrastructure, the transportation sector, and also consumer and business durables. Urban centres are particularly attractive locations for recycling facilities, especially in Perth and Adelaide. [Copyright &y& Elsevier]

Abstract: The objective of this special issue is to showcase what Cleaner Production (CP) practitioners and scholars in Australia and New Zealand have accomplished to date, and how they hope to progress in the coming decades. The contributions to this special issue have been grouped under three main categories: sectoral, regional, and CP methods and tools. These contributions suggest that the CP debate has moved on from anecdotal justification of CP through case studies to diffusing and broadening CP practices so that they fulfil their role as effective components of a viable, sustainable society. The continued evolution of CP methods and tools in Australia and New Zealand is a good indicator of such a trend. Papers in all three categories identify and present responses to the challenges faced in ensuring that CP activities are both linked to and informed by policy-making and that they support and enhance decisions made in pursuit of sustainable production. [Copyright &y& Elsevier]

This study considers the emissions implications of co-combusting imported ammonia in coal-fired power stations. The study adopts a supply chain approach, estimating the emissions reduction potential of 20% ammonia co-combustion in coal-fired power stations in the country of use, and the emissions associated with ammonia production in the country of origin. The paper considers the emissions implications of using different ammonia production technologies: Haber-Bosch (HB) ammonia production with hydrogen generated from steam methane reforming using natural gas (SMR), with and without carbon capture and storage (CCS); Haber-Bosch ammonia production with hydrogen generated from renewable sources; and fully renewable electricity generated ammonia. The empirical setting of the study is an ammonia supply chain encompassing Japan and Australia. The results show co-combustion of ammonia produced with SMR-HB provides no net benefit for the combined country emissions, as ammonia production related greenhouse emissions in Australia are equivalent to the emission reductions in Japan. In contrast, co-firing ammonia produced from fully renewable sources reduces emissions in the two countries in 2030 by 43 MT per annum. SMR-HB processes with varying levels of CCS reduce annual emissions by 16–34 MT. Based on the results, different policy options are suggested for managing the emissions associated with a Japan-Australia ammonia supply chain. • Japan actively pursuing ammonia/coal co-combustion to reduce power sector greenhouse gas emissions. • An Australia-Japan ammonia supply is examined at a country boundary emissions basis. • Choice of ammonia manufacturing approach has significant impact on emissions. • 40 MT pa saving in Japan offset by 39 ± 11 MT pa increase in Australia from Best Available Technology. • Only a fully renewable ammonia manufacturing process reduces emissions in both Australia and Japan. [ABSTRACT FROM AUTHOR]

The wine industry has been dedicating increasing efforts to considering the sustainability of the environment. Various approaches have been implemented to reduce the industry's carbon footprint. With over 40 million wine tourists globally, cellar door operations have become an important distribution channel, especially for the financial sustainability of small and medium-sized wineries, but this component has not been addressed in existing environmental life cycle assessments. This paper presents a methodology for measuring the carbon footprint of wine tourism and cellar door sales based on a combination of the bottom-up and the top-down approaches. In the case of Australia, we find both domestic and international wine tourism lead to substantially higher carbon emissions than the standard wine distribution channels. The difference can be more than 100 fold per bottle of wine. In addition, the benchmarking analysis indicates that cellar door sales may become the most carbon intensive component across all life cycle stages of wine. This information offers an opportunity to evaluate the environmental trade-offs that maybe involved in obtaining the numerous benefits of wine tourism, and to consider ways of minimizing wine tourism-related carbon emissions in the future. • A method for assessing the carbon emissions of direct-to-consumer "cellar door" sales to wine tourists is proposed. • The impacts of domestic and international wine tourism in Australia are evaluated and benchmarked. • Selling wine to tourists has a much larger carbon footprint than distributing through retailers. • Wine tourism and cellar door sales may be the most carbon intensive component across all wine production and consumption stages. • This methodology is a useful tool for predicting and monitoring the economic and environmental trade-offs of wine tourism. [ABSTRACT FROM AUTHOR]

This study presents an estimation of electrical and electronic equipment (EEE) products put-on-market (PoM), electronic-waste (e-waste) generation and the stock of EEE products in Australia from the year 2000–2047, considering seven categories that encompass 51 different types of product. Holt's double-exponential smoothing and dynamic lifespans (using the Weibull distribution function) are applied to compute past and future PoM and in e-waste generation, respectively. With the estimation, it is found that EEE PoM was increased from 470 kilo tons (kt) to 2135 kt in a timeframe of 2000–2015. On the other hand, e-waste generation was 115 kt in the year 2000, which then increased to 485 kt in the year 2010. For the projected period (2018–2047), the annual average growth of e-waste generation will be around 3%. E-waste generation will increase, particularly for large household appliances (LHA), small household appliances (SHA) and consumer equipment (CE), in terms of weight. This study evaluates the potentially recoverable material and revenue potential of regulated products (e.g., computer, televisions and other IT peripherals currently considered under the national television and computer recycling scheme (NTCRS) and mobile phones) and e-waste generated outside of the current product coverage. The gap between revenue generation from regulated and non-regulated products is quantitatively assessed for the first time and reported in this paper. Sensitivity and uncertainty analysis performed by Monte Carlo simulation showed the robustness and accuracy of this study. This quantification will provide invaluable insights to policymakers, including products in future legislative reform as well as the development of the recycling industry in Australia. Furthermore, this study presents a transparent process of calculation for time-series data that can be used for e-waste generation estimation for other countries, as well. • E-products put-on-market, e-waste generation, and stock in Australia were estimated. • The potentially recoverable material and revenue potential were evaluated. • The revenue generation gap between NTCRS and unregulated e-products was assessed. [ABSTRACT FROM AUTHOR]