Search

Nanofluids are the most attractive mean to enhance the performance of heat transfer devices. Several types of nanoparticles were utilized as they have high thermal conductivity. Renewable energy makes use of these nanofluids special in solar collectors. Evacuated tube solar collector is one of the most utilized solar collectors in thermal applications. CeO 2 nanoparticles were used in the presented study. The mean diameter of CeO 2 was 25 nm. A stable CeO 2 /water was made. The stability was checked using Zeta potential machine. Experiments were carried out using three different volume concentration of CeO 2 nanoparticles of 0.015%, 0.025%, and 0.035%. The thermal performance of the evacuated tube solar collector was examined at different mass flux rates. Results showed that the temperature difference between inlet and outlet flow and absorbed energy increase when nanofluids are used. The volume fraction flow rate of 0.035% at the mass flux rate of 0.017 kg/s.m 2 had the maximum heat removable factor, the thermo-optical characteristic of the collector, and the thermal loss coefficient. The thermo-optical characteristic of the collector of tube solar corrector is raised up to 34%. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) power is emission-free during operation. However, its life-cycle environmental impacts should be accounted for during the design phase. This paper presents the first methodology to calculate the product environmental footprint (PEF) and the levelized cost of electricity (LCOE) based on a unified technical modeling framework of ground-mounted, grid-connected PV power plants. To test the model, we determined the single- and multiobjective optima of 8 main balance-of-system design parameters applying a genetic algorithm for a case study of two geographical locations with distinct solar resources. Results show that impacts can be reduced by 1–13% in each of the 16 different PEF environmental impact categories. Unfortunately, the different types of impacts cannot be reduced simultaneously with a single design solution, calling for the use of a weighted environmental footprint as the most favorable single-score environmental indicator. Pareto-optimal design solutions for multiple objectives show that increasing the AC/DC ratio, row distance, tilt angle, and cable losses compared to the economic optimum is beneficial for carbon and environmental footprint reduction. By accepting a small cost increase, the majority of the potential impact reduction can be achieved. Trade-offs between economic and environmental objectives are analyzed by assigning a price tag to environmental impacts. Based on the proposed weighting scheme, regions with polluting electricity production mix should choose the most profitable plant design for the largest environmental benefit. In other places eco-design could lead to a 1% overall impact reduction for just 0.1% extra cost. Balancing power requirements, copper recycling scenarios, the uncertainty of ecological impacts, and combined land use are identified as future research areas. Image 1 • First study to integrate environmental footprint method in the design of PV plants. • Economic and environmental optimization results in fairly distinctive designs. • Environmental optimization leads to greater capacity factor but larger land area. • Weighting method between environmental and economic objective is proposed. • Taxing environmental impacts leads to a minor change in least-cost design. [ABSTRACT FROM AUTHOR]

The solar chimney power plant (SCPP) is a straightforward and clean technique to generate electricity from solar radiation. However, this technology still faces major challenges, such as low efficiency, which has hindered its industrialization. This study experimentally develops a novel collector design to improve the solar chimney collector's efficiency. The new design includes metallic tubes as solar radiation absorbers hung from the canopy of the collector. The metallic tubes are open at the top and sealed with transparent sheets at the bottom to decrease the solar radiation reflected into the ambient air. Experimental and 3-D computational fluid dynamics (CFD) analyses are performed to validate the new design. The effects of hanging metallic tubes on temperature and velocity distribution are explored. The temperature increased by about 5 K at the chimney inlet, causing a roughly 8% rise in collector efficiency due to the fact that metallic tubes operate as an extended surface. The impact of various tube geometries on solar chimneys' efficiency is examined. The CFD findings reveal that the metallic tube geometry variation has considerably impacted the collector's efficiency. Thus, the collector efficiency is increased by changing tube diameter by around 33.7%, similar to changing tube length by 30%. [Display omitted] • A new solar chimney's collector design was experimentally developed and compared with CFD simulation. • Effects of hung metallic tubes on air temperature and velocity distribution were explored. • Effects of various metallic tube geometries on the collector's efficiency were studied and compared. • The collector efficiency increased from 25% in conventional solar chimneys to 33.90% in the improved ones. [ABSTRACT FROM AUTHOR]