Search

Background: This review aimed to critically appraise the most recent orthopedic literature around cone beam weightbearing computed tomography (WBCT), summarizing what evidence has been provided so far and identifying the main research trends in the area. Methods: This scoping review was performed on studies published between January 2013 and December 2023 on the Pubmed database. All studies (both clinical and nonclinical) in which WBCT had been used were critically analyzed to extract the aim (or aims) of the study, and the main findings related to the role of this imaging modality in the diagnostic pathway. Results: Out of 1759 studies, 129 were selected. One hundred five manuscripts (81%) dealt with elective orthopedic conditions. The majority of the analyses (88 studies; 84%) were performed on foot and ankle conditions, while 13 (12%) studies looked at knee pathologies. There was a progressive increase in the number of studies published over the years. Progressive Collapsing Foot Deformity (22 studies; 25%) and Hallux Valgus (19 studies; 21%) were frequent subjects. Twenty-four (19%) manuscripts dealt with traumatic conditions. A particular interest in syndesmotic injuries was documented (12 studies; 60%). Conclusions: In this review, we documented an increasing interest in clinical applications of weightbearing CT in the orthopedic field between 2013 and 2023. The majority of the analyses focused on conditions related to the foot and the ankle; however, we found several works investigating the value of WBCT on other joints (in particular, the knee). [ABSTRACT FROM AUTHOR]

Background/Objectives: Three-dimensional (3D) analysis of maxillofacial structures in dysmorphic patients offers clinical advantages over 2D analysis due to its high accuracy and precision in measuring many morphological parameters. Currently, no reliable gold standard exists for calculating 3D volumetric measurements of maxillofacial structures when captured by 3D surface imaging techniques. The aim of this scoping review is to provide an overview of the scientific literature related to 3D surface imaging methods used for volumetric analysis of the dysmorphic maxillofacial structures of patients affected by CL/P or other syndromes and to provide an update on the existing protocols, methods, and, when available, reference data. Methods: A total of 17 papers selected according to strict inclusion and exclusion criteria were reviewed for the qualitative analysis out of more than 4500 articles published between 2002 and 2024 that were retrieved from the main electronic scientific databases according to the PRISMA-ScR guidelines. A qualitative synthesis of the protocols used for the selection of the anatomical areas of interest and details on the methods used for the calculation of their volume was completed. Results: The results suggest a great degree of heterogeneity between the reviewed studies in all the aspects analysed (patient population, anatomical structure, area selection, and volume calculation), which prevents any chance of direct comparison between the reported volumetric data. Conclusions: Our qualitative analysis revealed dissimilarities in the procedures specified in the studies, highlighting the need to develop uniform methods and protocols and the need for comparative studies to verify the validity of methods in order to achieve high levels of scientific evidence, homogeneity of volumetric data, and clinical consensus on the methods to use for 3D volumetric surface-based analysis. [ABSTRACT FROM AUTHOR]

Background: We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. Methods: The patients underwent maxillary molar intrusion using temporary anchorage devices (TADs) to deepen the overbite due to mandibular autorotation. Lateral cephalograms and dental cast models were obtained before treatment (T0), immediately after it (T1), and >1 year after it (T2). Skeletal and dental cephalometric changes and three-dimensional movements of the maxillary dentitions were evaluated. Results: At T0, cephalometric analysis indicated that patients had skeletal class I with tendencies for a class II jaw relationship and a skeletal open bite. During active treatment (T0 to T1), the maxillary first molar intruded by 1.6 mm, the mandibular first molar extruded by 0.3 mm, the Frankfort-mandibular plane angle decreased by 1.1°, and the overbite increased by 4.1 mm. Statistically significant changes were observed in the amount of vertical movement of the maxillary first molar, Frankfort-mandibular plane angle, and overbite. Three-dimensional (3D) dental cast analysis revealed that the maxillary first and second molars intruded, whereas the anterior teeth extruded, with the second premolar as an infection point. In addition, the maxillary molar was tipped distally by 2.9° and rotated distally by 0.91°. Statistically significant changes were observed in the amount of vertical movement of the central incisor, lateral incisor, canine and first molar, and molar angulation. From T1 to T2, no significant changes in cephalometric measurements or the 3D position of the maxillary dentition were observed. The maxillary and mandibular dentitions did not significantly change during post-treatment follow-up. Conclusions: Maxillary molar intrusion using mini-screws is an effective treatment for open bite correction, with the achieved occlusion demonstrating 3D stability at least 1 year after treatment. [ABSTRACT FROM AUTHOR]

Three-dimensional (3D) deformity assessment and leg realignment planning is emerging. The aim of this study was to (1) validate a novel 3D planning modality that incorporates the weight-bearing (WB) state (3D WB) by comparing it to existing modalities (3D non-weight-bearing (NWB), 2D WB) and (2) evaluate the influence of the modality (2D vs. 3D) and the WB condition on the measurements. Three different planning and deformity measurement protocols were analyzed in 19 legs that underwent medial open-wedge high tibial osteotomy (HTO): (1) a 3D WB protocol, after 2D/3D registration of 3D CT models onto the long-leg radiograph (LLR) (3D WB), (2) a 3D NWB protocol based on the 3D surface models obtained in the supine position (3D NWB), and (3) a 2D WB protocol based on the LLR (2D WB). The hip–knee–ankle angle (HKA), joint line convergence angle (JLCA), and the achieved surgical correction were measured for each modality and patient. All the measurement protocols demonstrated excellent intermodal agreement for the achieved surgical correction, with an ICC of 0.90 (95% CI: 0.76–0.96)) (p < 0.001). Surgical correction had a higher mean absolute difference compared to the 3D opening angle (OA) when measured with the WB protocols (3D WB: 2.7 ± 1.8°, 3D NWB: 1.9 ± 1.3°, 2D WB: 2.2 ± 1.3°), but it did not show statistical significance. The novel planning modality (3D WB) demonstrated excellent agreement when measuring the surgical correction after HTO compared to existing modalities. [ABSTRACT FROM AUTHOR]

Introduction: Left ventricular (LV) strains are measures of deformation that reflect LV function quantifying the rate of LV contraction, providing information in three directions in space: radial (RS), longitudinal (LS) and circumferential directions (CS). The LV moves around its longitudinal axis in a special movement called LV rotational mechanics. The present study aimed to assess associations between three-dimensional speckle-tracking echocardiography (3DSTE)-derived LV rotational mechanics and LV strains in healthy adult subjects. Methods: The present study consisted of 174 healthy adults (mean age: 32.8 ± 12.2 years, 79 males). Complete two-dimensional Doppler echocardiography and 3DSTE were performed in all subjects. Results: While LV-gRS and LV-gLS did not show associations with increased basal LV rotation, the lowest LV-gCS was seen in the presence of the highest LV basal rotation. An increase in basal LV rotation and consequential LV twist were not associated with apical LV rotation. While LV-gLS was not associated with the increase in apical LV rotation, LV-gRS and LV-gCS showed a trend towards increasing values. An increase in LV-gRS was associated with an increasing trend towards apical LV rotation, LV twist and LV-gCS and the preservation of basal LV rotation. LV-gLS also increased but only up to a certain value. An increase in LV-gCS was associated with a tendency towards a decrease in basal LV rotation and a tendency towards an increase in LV-gRS and LV-gLS. The highest LV-gCS was associated with the highest apical LV rotation and LV twist. The highest apical LV rotation, LV twist and LV-gCS were seen in the presence of the highest LV-gLS, while basal LV rotation and LV-gRS were not associated with increasing LV-gLS. Conclusions: Basal LV rotation has been shown to have an inverse relationship with LV-gCS, but without being related to LV-gRS and LV-gLS, while apical LV rotation is associated with LV strains in all directions, but to a different extent, suggesting a complex relationship between LV rotational mechanics and LV strains in healthy adults. [ABSTRACT FROM AUTHOR]

This feasibility study aims to explore the use of three-dimensional virtual surgical planning to preoperatively determine the need for reconstructive surgery following resection of an extremity soft-tissue sarcoma. As flap reconstruction is performed more often in advanced disease, we hypothesized that tumor volume would be larger in the group of patients that had undergone flap reconstruction. All patients that were treated by surgical resection for an extremity soft-tissue sarcoma between 1 January 2016 and 1 October 2019 in the University Medical Center Groningen were included retrospectively. Three-dimensional models were created using the diagnostic magnetic resonance scan. Tumor volume was calculated for all patients. Three-dimensional tumor volume was 107.8 (349.1) mL in the group of patients that had undergone primary closure and 29.4 (47.4) mL in the group of patients in which a flap reconstruction was performed, p = 0.004. Three-dimensional tumor volume was 76.1 (295.3) mL in the group of patients with a complication following ESTS treatment, versus 57.0 (132.4) mL in patients with an uncomplicated course following ESTS treatment, p = 0.311. Patients who had undergone flap reconstruction had smaller tumor volumes compared to those in the group of patients treated by primary closure. Furthermore, a larger tumor volume did not result in complications for patients undergoing ESTS treatment. Therefore, tumor volume does not seem to influence the need for reconstruction. Despite the capability of three-dimensional virtual surgical planning to measure tumor volume, we do not recommend its utilization in the multidisciplinary extremity soft-tissue sarcoma treatment, considering the findings of the study. [ABSTRACT FROM AUTHOR]

This longitudinal study aimed to evaluate facial growth and soft tissue changes in infants with complete unilateral cleft lip, alveolus, and palate (CUCLAP) at ages 3, 9, and 12 months. Using 3D images of 22 CUCLAP infants, average faces and distance maps for the entire face and specific regions were created. Color-coded maps highlighted more significant soft tissue changes from 3 to 9 months than from 9 to 12 months. The first interval showed substantial growth in the entire face, particularly in the forehead, eyes, lower lip, chin, and cheeks (p < 0.001), while the second interval exhibited no significant growth. This study provides insights into facial soft tissue growth in CUCLAP infants during critical developmental stages, emphasizing substantial improvements between 3 and 9 months, mainly in the chin, lower lip, and forehead. However, uneven growth occurred in the upper lip, philtrum, and nostrils throughout both intervals, with an overall decline in growth from 9 to 12 months. These findings underscore the dynamic nature of soft tissue growth in CUCLAP patients, highlighting the need to consider these patterns in treatment planning. Future research should explore the underlying factors and develop customized treatment interventions for enhanced facial aesthetics and function in this population. [ABSTRACT FROM AUTHOR]

Several methods have been introduced to measure the host bone coverage of the acetabular component after total hip arthroplasty (THA). The aims of this study were (1) to validate two-dimensional- and three-dimensional-based host bone coverage measurements by comparing intra-operative measurements, and (2) to determine the minimum host bone coverage for achieving stable cup fixation after THA in hip dysplasia. The clinical outcomes of each patient were evaluated during their final follow-up period using the Harris Hip score (HHS). The coverage of the host bone was analyzed by comparing 2D-based, 3D-based, and intraoperative assessments. The mean HHS was increased significantly from 60.84 ± 14.21 pre-operatively to 93.13 ± 4.59 (p < 0.0001). The host bone coverage ratio measured intraoperatively was 83.67 ± 3.40%, while the ratio measured by 3D CT reconstruction was 82.72 ± 3.59%. There was a strong positive correlation between the intra-operative host bone coverage and the 3D-based one (r = 0.826, p < 0.0001). It is recommended that 3D-based measurements are used to evaluate the host bone coverage after THA in patients with hip dysplasia. In addition, achieving a minimum host bone coverage of 75% is recommended for the attainment of stable cup fixation [ABSTRACT FROM AUTHOR]

Background: Conventional measures of fracture displacement have low interobserver reliability. This study introduced a novel 3D method to measure tibial plateau fracture displacement and its impact on functional outcome. Methods: A multicentre study was conducted on patients who had tibial plateau fracture surgery between 2003 and 2018. Eligible patients had a preoperative CT scan (slice thickness ≤ 1 mm) and received a Knee Injury and Osteoarthritis Outcome Score (KOOS) questionnaire. A total of 362 patients responded (57%), and assessment of initial and residual fracture displacement was performed via measurement using the 3D gap area (mm2). Patients were divided into four groups based on the 3D gap area size. Differences in functional outcome between these groups were assessed using analysis of variance (ANOVA). Multiple linear regression was used to determine the association between fracture displacement and patient-reported outcome. Results: Functional outcome appeared significantly worse when initial or residual fracture displacement increased. Multivariate linear regression showed that initial 3D gap area (per 100 mm2) was significantly negatively associated with all KOOS subscales: symptoms (−0.9, p < 0.001), pain (−0.0, p < 0.001), ADL (−0.8, p = 0.002), sport (−1.4, p < 0.001), and QoL (−1.1, p < 0.001). In addition, residual gap area was significantly negatively associated with the subscales symptoms (−2.2, p = 0.011), ADL (−2.2, p = 0.014), sport (−2.6, p = 0.033), and QoL (−2.4, p = 0.023). Conclusion: A novel 3D measurement method was applied to quantify initial and residual displacement. This is the first study which can reliably classify the degree of displacement and indicates that increasing displacement results in poorer patient-reported functional outcomes. [ABSTRACT FROM AUTHOR]

Introduction. The tricuspid valve and its annulus (TA) are thought to be integrally related to right atrial (RA) size and function. The present study aimed to assess associations between TA dimensions and RA strains, and quantitative features of its contractility were determined by 3DSTE in healthy adults. Methods. The study comprised 145 healthy volunteers with a mean age of 34.4 ± 12.5 years (73 males). Electrocardiographic, two-dimensional Doppler echocardiographic and 3DSTE parameters were in normal reference ranges in all subjects. Results. Enlarged TA areas, regardless of which phase of the cardiac cycle were measured, were not associated with the deterioration of peak RA strains in longitudinal (LS) and circumferential (CS) directions. Increased end-diastolic TA area was associated with reduced RA strain in the radial direction (RS). Dilation of end-diastolic and end-systolic TA areas was related to increased RA volumes. End-diastolic TA area was the smallest in case of increased peak global RA-RS, and other associations between increasing TA areas and peak global strains could not be detected. Peak global RA-CS and RA-LS were not related to TA areas. Increasing peak global RA-RS was not associated with peak global RA-LS and RA-CS, while increasing peak global RA-LS and RA-CS were not associated with peak global RA-RS. Increasing peak global RS did not show associations with RA volumes, Vmin was the smallest in the case of highest peak global RA-CS and RA-LS. Vmax increased with increasing peak global RA-LS. Conclusions. 3DSTE is suitable for simultaneous non-invasive determination of TA dimensions and RA volumes and strains using the same acquired 3D dataset, allowing physiologic studies. RA volumes are associated with end-diastolic and end-systolic TA areas. RA strains in radial direction (RS) show associations with end-diastolic TA area. [ABSTRACT FROM AUTHOR]

Introduction: The left atrium (LA) has a significant role in regulating blood flow from veins to the left ventricle (LV). LV performance is affected by several factors including preload, which is partly, but highly, dependent on LA volumes. The aim of the present study is to perform simultaneous assessment of LA and LV volume changes during the cardiac cycle in healthy circumstances. Therefore, LA and LV volumes and volume-based functional properties were determined in healthy adults, and the associations of these parameters were examined. Methods: The present study consists of 164 healthy adults (age: 33.0 ± 12.3 years, 82 males) being in sinus rhythm. All subjects have undergone complete two-dimensional Doppler echocardiography with three-dimensional speckle-tracking echocardiography (3DSTE). Results: Increased end-systolic maximum LA volume was associated with higher LV volumes and reduced LV ejection fraction. Very high early pre-atrial contraction and late diastolic LA volumes were associated with increased LV volumes, reduced LV ejection fraction and increased LV mass. Increased LA volumes were associated with increased LV mass. Higher LV volumes were associated with tendentiously higher LA volumes. Higher LV end-diastolic volume was associated with tendentiously higher all LA stroke volumes (SVs) and total and active LA emptying fractions (EFs). Higher LV end-systolic volume was associated with tendentiously higher all LA SVs but preserved all LA EFs. Conclusions: 3DSTE is capable of simultaneous assessment of LA and LV volumes and volume-based functional properties for (patho)physiologic studies. Moreover, 3DSTE-derived LV and LA volumes and functional properties show strong associations. [ABSTRACT FROM AUTHOR]

Although real-time 3D echocardiography (RT3DE) has only been introduced in the last decades, its use still needs to be improved since it is a time-consuming and operator-dependent technique and acquiring a good quality data can be difficult. Moreover, the additive value of this important diagnostic tool still needs to be wholly appreciated in clinical practice. This review aims at explaining how, why, and when performing RT3DE is useful in clinical practice. [ABSTRACT FROM AUTHOR]

Polyetheretherketone (PEEK) has become the biomaterial of choice for repairing craniofacial defects over time. Prospects for the point-of-care (POC) fabrication of PEEK customized implants have surfaced thanks to the developments in three-dimensional (3D) printing systems. Consequently, it has become essential to investigate the characteristics of these in-house fabricated implants so that they meet the necessary standards and eventually provide the intended clinical benefits. This study aimed to investigate the effects of the steam sterilization method on the dimensional accuracy of POC 3D-printed PEEK customized cranial implants. The objective was to assess the influence of standard sterilization procedures on material extrusion-based 3D-printed PEEK customized implants with non-destructive material testing. Fifteen PEEK customized cranial implants were fabricated using an in-house material extrusion-based 3D printer. After fabrication, the cranial implants were digitalized with a professional-grade optical scanner before and after sterilization. The dimensional changes for the 3D-printed PEEK cranial implants were analyzed using medically certified 3D image-based engineering software. The material extrusion 3D-printed PEEK customized cranial implants displayed no statistically significant dimensional difference with steam sterilization (p > 0.05). Evaluation of the cranial implants' accuracy revealed that the dimensions were within the clinically acceptable accuracy level with deviations under 1.00 mm. Steam sterilization does not significantly alter the dimensional accuracy of the in-house 3D-printed PEEK customized cranial implants. [ABSTRACT FROM AUTHOR]

Introduction: As has been established, the left ventricle (LV) and the left atrium (LA) form an organic unit of the left heart; however, little is known about the dependence of LV rotational parameters on LA volumes, even in healthy circumstances. Therefore, the present study aimed to assess the associations between basal and apical LV rotations and LA volumes and volume-based functional properties throughout the cardiac cycle in healthy adults by three-dimensional speckle-tracking echocardiography. Methods: The present study comprised 167 healthy adults (age: 33.4 ± 12.6 years, 77 males) with normally directed LV rotational mechanics. All subjects underwent complete two-dimensional Doppler echocardiography with three-dimensional speckle-tracking echocardiography (3DSTE)-derived data acquisition. The 3DSTE-derived LA volumes and LV rotational parameters were determined at a later date. Results: An increasing end-systolic maximum LA volume (Vmax) was associated with increasing pre-atrial-contraction early (VpreA) and minimum end-diastolic (Vmin) LA volumes, and all stroke volumes were increased as well. Systolic basal left ventricular rotation (LVrot) was highest in the case of the highest systolic Vmax and early-diastolic VpreA. Apical LVrot did not show obvious associations with any increasing LA volumes. The highest systolic basal LVrot was associated with significantly increased diastolic VpreA and Vmin. Reduced diastolic LA volumes (VpreA, Vmin) were seen in the case of increased apical LVrot. An increasing basal LVrot was associated with the tendentious lowering of the apical LVrot and the significant elevation of LV twist. Similarly, an increasing apical LVrot was associated with the tendentious lowering of basal LVrot and the significant elevation of LV twist. Conclusions: Strong associations and adaptations between 3DSTE-derived LA volumes throughout the cardiac cycle and LV rotational mechanics were evidenced, even in healthy circumstances. [ABSTRACT FROM AUTHOR]

This study aimed to determine the reliability of three-dimensional (3D) stereophotogrammetry as a measurement instrument for evaluating soft tissue changes in the head and neck area. Twelve patients received a bilateral sagittal split osteotomy (BSSO). Test and retest 3D photographs were captured within the first three postoperative weeks, and a reference 3D photograph was capture at three months postoperatively. Distance measurements, mean and root mean square of the distance map, and volume differences were obtained. Reliability of these parameters was assessed by intraclass correlation coefficients (ICCs), standard error of measurement (SEM), and smallest detectable change (SDC). All distance measurements had an ICC > 0.91, and the distance map parameters and volume differences showed ICCs > 0.89. The neck region presented the largest SEMs (5.09 mL) and SDC (14.1 mL) for the volume difference. In conclusion, 3D stereophotogrammetry is reliable for distance and volume measurements of soft tissues in patients after a BSSO advancement. [ABSTRACT FROM AUTHOR]

Heart failure (HF) is an extremely major health problem with gradually increasing incidence in developed and developing countries. HF may lead to cardiac remodeling; thus, advanced imaging techniques are required to comprehensively evaluate cardiac mechanics. Recently, three-dimensional speckle-tracking echocardiography (3D-STE) has been developed as a novel imaging technology that is based on the three-dimensional speckle-tracking on the full volume three-dimensional datasets. Three-dimensional speckle-tracking echocardiography allows a more accurate evaluation of global and regional myocardial performance, assessment of cardiac mechanics, detection of subclinical cardiac dysfunction, and prediction of adverse clinical events in a variety of cardiovascular diseases. Therefore, this review summarizes the clinical usefulness of 3D-STE in patients with HF. [ABSTRACT FROM AUTHOR]

A standard method to assess changes in craniofacial morphology over time is through the superimposition of serial patient images. This study evaluated the reliability of a novel anterior cranial base reference area, principally including stable midline structures (EMACB) after an early age, and compared it to the total anterior cranial base (TACB) and an area including only midline structures (MACB). Fifteen pairs of pre-existing serial CBCT images acquired from growing patients were superimposed with all techniques by applying a best-fit registration algorithm of corresponding voxel intensities (Dolphin 3D software). The research outcomes were the reproducibility of each technique and the agreement between them in skeletal change detection, as well as their validity. The TACB and EMACB methods were valid, since the superimposed midline ACB structures consistently showed adequate overlap. They also presented perfect overall reproducibility (median error < 0.01 mm) and agreement (median difference < 0.01 mm). MACB showed reduced validity, higher errors, and a moderate agreement to the TACB. Thus, the EMACB method performed efficiently and mainly included the stable midline ACB structures during growth. Based on the technical, anatomical, and biological principles applied when superimposing serial 3D data to assess craniofacial changes, we recommend the EMACB method as the method of choice to fulfil this purpose. [ABSTRACT FROM AUTHOR]

Background: The aim of this study was to assess the effectiveness of 38 supervised postoperative physiotherapy (SVPh) visits conducted between 1 and 20 weeks after SSATOM on the values of 3D gait parameters measured at 10 and 20 weeks after surgery. Material: Group I comprised male patients (n = 22) after SSATOM (SVPh x = 38 visits) and Group II comprised male patients (n = 22) from the control group. Methods: A non-randomized, open-label, controlled clinical trial was performed in the two groups to obtain the following values: Step length (cm), stride length (cm), step width (cm), next stance phase (%), swing phase (%), double support (%), gait velocity (m/s), and walking frequency (step/min). The measurements were carried out using the BTS SMART system (Italy). Results: Orthopedic examination showed no pain, a negative result of Thompson and Matles tests, and proper healing of Achilles tendon (ultrasound image). In Group I, between 10 and 20 weeks after SSATOM, there was a statistically significant improvement in all tested gait parameter values (p ≤ 0.001 to 0.009). Conclusions: Conducting 38 SVPh visits significantly improved the values of the analyzed kinematic and spatiotemporal gait parameters in patients in the twentieth week after SSATOM, which were mostly close to the non-operated side and the results of the control group. However, the gait speed and stride length were not close to the results of the control group. [ABSTRACT FROM AUTHOR]

The study aimed to evaluate the reliability and reproducibility and compare the outcomes of two 3D voxel-based superimposition techniques for craniofacial CBCT images, using anterior cranial base areas of different extent as references. Fifteen preexisting pairs of serial CBCTs (initial age: 11.7 ± 0.6 years; interval: 1.7 ± 0.4 years) were superimposed on total anterior cranial base (TACB) or middle anterior cranial base (MACB) structures through the Dolphin 3D software. The overlap of the reference structures was assessed visually to indicate reliability. All superimpositions were repeated by the same investigator. Outcomes were compared to assess the agreement between the two methods. Reliability was perfect for the TACB and moderate for the MACB method (p = 0.044). Both areas showed good overall reproducibility, though in individual cases there were notable differences for MACB superimpositions, ranging from −1.84 to 1.64 mm (TACB range: −0.48 to 0.31 mm). The overall agreement in the detected T0/T1 changes was also good, though it was significantly reduced for individual measurements (median < 0.01 mm, IQR: 0.46 mm, range: −2.81 to 0.73 mm). In conclusion, the voxel-based superimposition on TACB was more reliable and showed higher reproducibility than the superimposition on MACB. Thus, the extended anterior cranial base area is recommended for the assessment of craniofacial changes. [ABSTRACT FROM AUTHOR]

This study evaluates the accuracy of drill guides fabricated in medical-grade, biocompatible materials for static, computer-aided implant surgery (sCAIS). The virtually planned drill guides of ten completed patient cases were printed (n = 40) using professional (Material Jetting (MJ)) and consumer-level three-dimensional (3D) printing technologies, namely, Stereolithography (SLA), Fused Filament Fabrication (FFF), and Digital Light Processing (DLP). After printing and post-processing, the drill guides were digitized using an optical scanner. Subsequently, the drill guide's original (reference) data and the surface scans of the digitized 3D-printed drill guide were superimposed to evaluate their incongruencies. The accuracy of the 3D-printed drill guides was calculated by determining the root mean square (RMS) values. Additionally, cast models of the planned cases were used to check that the drill guides fitted manually. The RMS (mean ± SD) values for the accuracy of 3D-printed drill guides were—MJ (0.09 ± 0.01 mm), SLA (0.12 ± 0.02 mm), FFF (0.18 ± 0.04 mm), and DLP (0.25 ± 0.05 mm). Upon a subjective assessment, all drill guides could be mounted on the cast models without hindrance. The results revealed statistically significant differences (p < 0.01) in all except the MJ- and SLA-printed drill guides. Although the measured differences in accuracy were statistically significant, the deviations were negligible from a clinical point of view. Within the limits of this study, we conclude that consumer-level 3D printers can produce surgical guides with a similar accuracy to a high-end, professional 3D printer with reduced costs. [ABSTRACT FROM AUTHOR]

Pure orbital blowout fractures occur within the confines of the internal orbital wall. Restoration of orbital form and volume is paramount to prevent functional and esthetic impairment. The anatomical peculiarity of the orbit has encouraged surgeons to develop implants with customized features to restore its architecture. This has resulted in worldwide clinical demand for patient-specific implants (PSIs) designed to fit precisely in the patient's unique anatomy. Material extrusion or Fused filament fabrication (FFF) three-dimensional (3D) printing technology has enabled the fabrication of implant-grade polymers such as Polyetheretherketone (PEEK), paving the way for a more sophisticated generation of biomaterials. This study evaluates the FFF 3D printed PEEK orbital mesh customized implants with a metric considering the relevant design, biomechanical, and morphological parameters. The performance of the implants is studied as a function of varying thicknesses and porous design constructs through a finite element (FE) based computational model and a decision matrix based statistical approach. The maximum stress values achieved in our results predict the high durability of the implants, and the maximum deformation values were under one-tenth of a millimeter (mm) domain in all the implant profile configurations. The circular patterned implant (0.9 mm) had the best performance score. The study demonstrates that compounding multi-design computational analysis with 3D printing can be beneficial for the optimal restoration of the orbital floor. [ABSTRACT FROM AUTHOR]

Additively manufactured subperiosteal jaw implants (AMSJI) are patient-specific, 3D-printed, titanium implants that provide an alternative solution for patients with severe maxillary bone atrophy. The aim of this study was to evaluate the bony remodeling of the maxillary crest and supporting bone using AMSJI. Fifteen patients with a Cawood–Howell Class V or greater degree of maxillary atrophy were evaluated using (cone beam) computed tomography scans at set intervals: one month (T1) and twelve months (T2) after definitive masticatory loading of bilateral AMSJI implants in the maxilla. The postoperative images were segmented and superimposed on the preoperative images. Fixed evaluation points were determined in advance, and surface comparison was carried out to calculate and visualize the effects of AMSJITM on the surrounding bone. A total mean negative bone remodeling of 0.26 mm (SD 0.65 mm) was seen over six reference points on the crest. Minor bone loss (mean 0.088 mm resorption, SD 0.29 mm) was seen at the supporting bone at the wings and basal frame. We conclude that reconstruction of the severely atrophic maxilla with the AMSJI results in minimal effect on supporting bone. Reduced stress shielding with a biomechanically tuned subperiosteal implant does not induce radiographically significant crestal bone atrophy. [ABSTRACT FROM AUTHOR]

Pulmonary arterial hypertension (PAH) is a rare, progressive disease in which there is a persistent, abnormal increase in pulmonary artery pressure. Symptoms of pulmonary hypertension are nonspecific and mainly associated with progressive right ventricular failure. The diagnosis of PAH is a multistep process and often requires the skillful use of several tests. The gold standard for the diagnosis of PAH is hemodynamic testing. Echocardiography currently plays an important role in the diagnostic algorithm of PAH as it is minimally invasive and readily available. Moreover, many echocardiographic parameters are closely related to pulmonary hemodynamics. It allows assessment of the right heart′s structure and function, estimation of the pressure in the right ventricle, right atrium, and pulmonary trunk, and exclusion of other causes of elevated pulmonary bed pressure. Echocardiographic techniques are constantly evolving, and recently, measurements made using new techniques, especially 3D visualization, have become increasingly important. In echocardiographic assessment, it is crucial to know current guidelines and new reports that organize the methodology and allow standardization of the examination. This review aims to discuss the different echocardiographic techniques used to evaluate patients with PAH. [ABSTRACT FROM AUTHOR]

This study tested for longitudinal changes in femoral cartilage T2 relaxation time and thickness in fast-progressing medial femorotibial osteoarthritis (OA). From the Osteoarthritis Initiative (OAI) database, nineteen knees fulfilled the inclusion criteria, which included medial femorotibial OA and sequential progression from Kellgren–Lawrence grade (KL) 1 to KL2 to KL3 within five years. Median T2 value and mean thickness were calculated for six condylar volumes of interest (VOIs; medial/lateral anterior, central, posterior) and six sub-VOIs (medial/lateral anterior external, central, internal). T2 value and thickness changes between severity timepoints were tested using repeated statistics. T2 values increased between KL1 and KL2 and between KL1 and KL3 in the medial compartment (p ≤ 0.02), whereas both increases and decreases were observed between the same timepoints in the lateral compartment (p ≤ 0.02). Cartilage thickness decreased in VOI/subVOIs of the medial compartment from KL1 to KL2 and KL3 (p ≤ 0.014). Cartilage T2 value and thickness changes varied spatially over the femoral condyles. While all T2 changes occurred in the early radiographic stages of OA, thickness changes occurred primarily in the later stages. These data therefore support the use of T2 relaxation time analyses in methods of detecting disease-related change during early OA, a valuable period for therapeutic interventions. [ABSTRACT FROM AUTHOR]

The aim of this cohort study was to quantify the morphological changes in the palatal cleft and true cleft areas with passive plate therapy using a new analysis method based on three-dimensional standardized reproducible landmarks. Forty-five casts of 15 consecutive patients with complete unilateral cleft lip and palate were laser scanned and investigated retrospectively. The landmarks and the coordinate system were defined, and the interrater and intrarater measurement errors were within 1.0 mm. The morphological changes of the cleft palate area after a period of 8 months of passive plate therapy without prior lip surgery are presented graphically. The median decrease in cleft width was 38.0% for the palatal cleft, whereas it was 44.5% for the true cleft. The width of the true and palatal cleft decreased significantly over a period of 8 months. The true cleft area decreased by 34.7% from a median of 185.4 mm2 (interquartile range, IQR = 151.5–220.1) to 121.1 mm2 (IQR = 100.2–144.6). The palatal cleft area decreased by 31.5% from a median of 334 mm2 (IQR = 294.9–349.8) to 228.8 mm2. The most important clinical considerations are the reproducibility and reliability of the anatomical points, as well as the associated morphological changes. We propose using the vomer edge to establish a validated measuring method for the width, area, and height of the true cleft. [ABSTRACT FROM AUTHOR]

Background: In complete or dextro-transposition of the great arteries (dTGA), the aorta and the pulmonary artery are transposed. The present study was designed to examine dTGA-associated left atrial (LA) volumetric and functional abnormalities in adult patients late after repair and to compare their results to those of healthy controls. Methods: The present study consisted of 15 dTGA patients (30.3 ± 8.1 years, 9 males), the patients had Mustard (n = 8) or Senning (n = 7) procedure performed. Their results were compared to those of 36 age- and gender-matched healthy subjects (28.7 ± 1.5 years, 24 males). Results: Increased maximum LA volume and reduced LA emptying fractions respecting the cardiac cycle could be demonstrated in our dTGA patients. LA stroke volumes representing all LA functions were significantly reduced. Peak LA circumferential, longitudinal, and area strains and LA circumferential, longitudinal, and area strains measured at atrial contraction were reduced in our dTGA patients. Most LA strains were reduced in patients having Mustard surgery compared to controls and patients undergoing Senning operation. Conclusions: Significant LA volumetric and functional abnormalities could be demonstrated in adult patients with dTGA late after repair. Senning procedure seems to have more beneficial long-term effects on LA volumetric and functional features as compared to the Mustard procedure. [ABSTRACT FROM AUTHOR]

Deformational plagiocephaly (DP) is considered a risk factor for facial asymmetry. This cohort-based, prospective, follow-up study used three-dimensional (3D) stereophotogrammetry to assess the development of facial asymmetry in a normal birth cohort and to investigate the impact of DP on facial asymmetry for the age range of one to three years. The study sample consisted of 75 children: 35 girls (47%) and 40 (53%) boys recruited from Oulu University Hospital. A total of 23 (31%) subjects had a history of DP in infancy. 3D facial images were obtained at the mean (SD) age of 1.01 (0.04) year old at T1 and 3.02 (0.14) years old at T2. To determine facial asymmetry, both landmark-based and surface-based facial symmetry methods were used. As measured with the surface-based methods, upper facial symmetry improved from T1 to T2 (p < 0.05). As measured with the landmark-based methods, facial symmetry improved on the upper and lower jaw from T1 to T2 (p < 0.05). The asymmetric effect of DP on the upper parts of the face tends to correct spontaneously during growth. Results indicate that previous DP does not seem to transfer to facial or occlusal asymmetry at the age of three years old. [ABSTRACT FROM AUTHOR]

Deformational plagiocephaly (DP) is considered a risk factor for facial asymmetry. This cohort-based, prospective, follow-up study used three-dimensional (3D) stereophotogrammetry to assess the development of facial asymmetry in a normal birth cohort and to investigate the impact of DP on facial asymmetry for the age range of one to three years. The study sample consisted of 75 children: 35 girls (47%) and 40 (53%) boys recruited from Oulu University Hospital. A total of 23 (31%) subjects had a history of DP in infancy. 3D facial images were obtained at the mean (SD) age of 1.01 (0.04) year old at T1 and 3.02 (0.14) years old at T2. To determine facial asymmetry, both landmark-based and surface-based facial symmetry methods were used. As measured with the surface-based methods, upper facial symmetry improved from T1 to T2 ( p < 0.05). As measured with the landmark-based methods, facial symmetry improved on the upper and lower jaw from T1 to T2 ( p < 0.05). The asymmetric effect of DP on the upper parts of the face tends to correct spontaneously during growth. Results indicate that previous DP does not seem to transfer to facial or occlusal asymmetry at the age of three years old.

Object: Utilization of pedicle screws (PS) for spine stabilization is common in spinal surgery. With reliance on visual inspection of anatomical landmarks prior to screw placement, the free-hand technique requires a high level of surgeon skill and precision. Three-dimensional (3D), computer-assisted virtual neuronavigation improves the precision of PS placement and minimization steps., Methods: Twenty-three patients with degenerative, traumatic, or neoplastic pathologies received treatment via a novel three-step PS technique that utilizes a navigated power driver in combination with virtual screw technology. (1) Following visualization of neuroanatomy using intraoperative CT, a navigated 3-mm match stick drill bit was inserted at an anatomical entry point with a screen projection showing a virtual screw. (2) A Navigated Stryker Cordless Driver with an appropriate tap was used to access the vertebral body through a pedicle with a screen projection again showing a virtual screw. (3) A Navigated Stryker Cordless Driver with an actual screw was used with a screen projection showing the same virtual screw. One hundred and forty-four consecutive screws were inserted using this three-step, navigated driver, virtual screw technique., Results: Only 1 screw needed intraoperative revision after insertion using the three-step, navigated driver, virtual PS technique. This amounts to a 0.69% revision rate. One hundred percent of patients had intraoperative CT reconstructed images taken to confirm hardware placement., Conclusions: Pedicle screw placement utilizing the Stryker-Ziehm neuronavigation virtual screw technology with a three step, navigated power drill technique is safe and effective.