Search

Three-dimensional (3D) carbon-based materials have attracted growing attention in the field of electromagnetic wave absorption applications. However, their high conductivity results in high dielectric constant, leading to impedance mismatching, and this characteristic finally weakens their electromagnetic wave absorption performance. In this work, 3D carbon foam (3DCF) was successfully prepared by calcining the melamine foam as the carbon framework precursor under N 2 atmosphere. Subsequently, 1T-2H MoS 2 nanosheets were uniformly assembled on the surface of the 3DCF skeleton through a solvothermal process. The diameter of the 3DCF skeleton was about 1 μm and the thickness of the 1T-2H MoS 2 on the surface was about 150 nm. The 3D network brings in many advantages for microwave attenuation, including numerous conductive pathways, excellent impedance matching and multi-polarization processes. The composites exhibited a maximum reflection loss (RL max) of −45.88 dB at 10.2 GHz with the thickness of 2.2 mm, and the effective absorbing bandwidth (E AB) was as wide as 5.68 GHz, implying their superb microwave absorption behavior. This work is believed to offer a strategy for the design of efficient 3D electromagnetic wave absorbers with low density in the future. [ABSTRACT FROM AUTHOR]

[Display omitted] Absorbing materials can convert electromagnetic wave (EMW) energy into heat and other energy and dissipate it. Carbon materials can attenuate EMW by generating large conduction losses due to their high conductivity. The introduction of low dielectric materials can improve impedance matching caused by high conductivity. However, the density of materials compounded with carbon materials is too large, which affects the overall density of composite materials. Therefore, this problem is solved by matching melamine foam with ZIF-67. As an ultra-light material, the melamine foam-based carbon material can significantly reduce the density of composite materials, and its developed three-dimensional structure can cause multiple scattering of EMW. The large specific surface area and evenly distributed metal oxides obtained after annealing of ZIF-67 can provide ultra-low-density carbon materials and abundant interfacial polarization to further attenuate EMW. So far, the methods of self-growing materials on the surface of melamine foam have not been reported. We prepared a 500 nm Co 3 O 4 nanosheet/carbon foam (CF) composite material coated on the surface by a two-step method. The sample had a maximum reflection loss of −46.58 dB at 10.72 GHz, and an effective absorption bandwidth (EAB) of 5.4 GHz. This research provides a new idea for the growth of porous materials on the surface of melamine foam-based carbon materials. [ABSTRACT FROM AUTHOR]

[Display omitted] One-dimensional carbon-based materials have emerged as promising electromagnetic wave absorption agents due to their outstanding conductivity, high stability, low weight, and easy availability. Properly optimizing their electromagnetic parameters is expected to further enhance the electromagnetic wave attenuation capacity. In this work, efficient Cu 9 S 5 /C nanocomposite fibers are prepared by a combined approach of electrospinning and subsequent carbonization-sulfurization processes. The Cu 9 S 5 nanoparticles with size of ca. 100–200 nm were homogeneously embedded in fibrous carbon matrix with diameter of 300 nm. For electromagnetic wave absorption, the optimized composited nanofibers (Cu 9 S 5 /C-3) exhibited an extremely superb reflection loss of −65.4 dB (9.5 GHz, 2.7 mm) at a lower mass fraction (20 wt%). And the effective absorption bandwidth could be up to 4.1 GHz (8.0–12.1 GHz) with a matching thickness of 2.9 mm, covering the whole X-band. Electromagnetic wave attenuation mechanism investigation revealed that the performance enhancement originated from the synergy of various loss pathways, including interfacial polarization, dipole polarization, and conductive loss. The unique hierarchical structure from particle embedding, one-dimensional fiber, to three-dimensional network further amplified the performance advantages of each component. This work is anticipated to provide a feasible strategy to synthesize sulfide/carbon binary composite fibers for efficient electromagnetic wave absorption. [ABSTRACT FROM AUTHOR]

[Display omitted] Regulating electromagnetic parameters and thus improving impedance matching characteristics by multi-component design is regarded as a prospective approach to obtain highly efficient electromagnetic wave absorption materials. Whereas, it is still challenging to fabricate microwave absorbers with strong absorption capacity and durability in harsh conditions. Based on the above considerations, three-dimensional porous multi-functional manganese oxide/nickel/carbon microspheres had been designed and prepared through a combined approach of facile solvothermal reactions and subsequent carbonization processes. The textural characteristic examinations demonstrated that, numerous manganese oxide and Ni nanoparticles of 15–20 nm in diameter were well dispersed in the carbon-based microspheres of approximately 0.8–1 μm in size. Microwave absorption property evaluation indicated that the minimum reflection loss reached up to −53.6 dB at 9.5 GHz, and effective absorption bandwidth of 3.7 GHz was achieved at matching thickness of merely 2.0 mm. The electromagnetic wave attenuation mechanisms analysis displayed that excellent impedance matching and various dissipation pathways, including magnetic loss, interfacial and dipole polarization relaxation synergistically contributed to the high microwave absorption performances of the porous composites. Radar cross-sectional simulation and photothermal measurements verified that the materials were supposed to have promising foregrounds in complicated circumstances. [ABSTRACT FROM AUTHOR]

This work reported a NIR-II window triple-mode synergistic antibacterial nanoplatform cCuS@Van NPs, providing a reference for the future development of multi-mode antibacterial therapeutic nanoplatforms. [Display omitted] The widespread use of antibiotics leads to the increasing drug resistance of bacteria and poses a threat to human health. Therefore, there is an urgent need to develop new antibacterial strategies. Herein, based on the good photothermal properties of Copper sulfide (CuS) nanoparticles under near infrared (NIR) laser, we developed a NIR-Ⅱ window triple-mode synergetic antibacterial cCuS (cationic CuS) @Vancomycin (Van) nanoplatform. In the proposed nanoplatform, the positive charge on the surface makes cCuS@Van nanoplatform show better bacterial uptake and membrane damage; vancomycin induces chemical sterilization and provides a targeting effect to the nanoplatform; combined with the strong photothermal effect and deep tissue penetration at the excitation of 1064 nm laser, cCuS@Van nanoplatform can effectively kill bacterial. The photothermal conversion efficiency of the nanoplatform can reach 49.12 % and in vitro experiments show a sterilizing rate of more than 99.5 % to staphylococcus aureus (S. aureus) at the concentration of 3.0 μM, which also demonstrated the synergistic effect of cCuS@Van nanoplatform. In addition, low cytotoxicity to human cells conforms the good biocompatibility of the as-prepared cCuS@Van nanoplatform, which endows it a good application prospect in the field of antibacterial, such as wound healing and implant sterilization. [ABSTRACT FROM AUTHOR]

This work reported a NIR-II window triple-mode synergistic antibacterial nanoplatform cCuS@Van NPs, providing a reference for the future development of multi-mode antibacterial therapeutic nanoplatforms. [Display omitted] The widespread use of antibiotics leads to the increasing drug resistance of bacteria and poses a threat to human health. Therefore, there is an urgent need to develop new antibacterial strategies. Herein, based on the good photothermal properties of Copper sulfide (CuS) nanoparticles under near infrared (NIR) laser, we developed a NIR-Ⅱ window triple-mode synergetic antibacterial cCuS (cationic CuS) @Vancomycin (Van) nanoplatform. In the proposed nanoplatform, the positive charge on the surface makes cCuS@Van nanoplatform show better bacterial uptake and membrane damage; vancomycin induces chemical sterilization and provides a targeting effect to the nanoplatform; combined with the strong photothermal effect and deep tissue penetration at the excitation of 1064 nm laser, cCuS@Van nanoplatform can effectively kill bacterial. The photothermal conversion efficiency of the nanoplatform can reach 49.12 % and in vitro experiments show a sterilizing rate of more than 99.5 % to staphylococcus aureus (S. aureus) at the concentration of 3.0 μM, which also demonstrated the synergistic effect of cCuS@Van nanoplatform. In addition, low cytotoxicity to human cells conforms the good biocompatibility of the as-prepared cCuS@Van nanoplatform, which endows it a good application prospect in the field of antibacterial, such as wound healing and implant sterilization. [ABSTRACT FROM AUTHOR]

[Display omitted] Globally, drug-resistant bacteria are a potential threat to human society owing to the overuse of antibiotics and thus, non-antibiotic bactericides are urgently needed. Herein, an innovative antibacterial nanoplatform based on quaternized chitosan (QCS)/ silver (Ag)/ cobalt phosphide (CoP) nanocomposites is envisaged for achieving near-infrared (NIR) laser-inducible rapid sterilisation. In the core-shell hybrids, Ag nanoparticles (NPs) with a size of ∼ 25 nm were uniformly deposited on CoP nanoneedles, upon which a layer of QCS (approximately 10 wt%), is coated. Numerical calculations revealed that under NIR irradiation, high-energy hot electrons arising from the surface plasmon resonance effect of Ag migrate into the interface between Ag and CoP, and amplify the photothermal effect of CoP. Meanwhile, photo-excited electrons from CoP are transported onto Ag NPs because the Schottky heterostructure facilitates the production of reactive oxygen species. Ag loading simultaneously enhances the photocatalytic and photothermal effects of CoP, achieving rapid antibacterial activity synergistically. The QCS coating improves the dispersibility of power in an aqueous system and provides contact between the antiseptics and bacteria. The ternary QCS/Ag/CoP nanocomposites achieved greater than 99.6% inactivation against S. aureus and E. coli within 10 min. In addition, the nanocomposites were confirmed to be noncytotoxic to mammals. Consequently, the QCS/Ag/CoP nanoplatforms possess great potential for rapid and effective antibacterial applications. [ABSTRACT FROM AUTHOR]

The optimal impedance matching and strong dissipation ability could be obtained by tuning the content of NiS and ZnS in the ZnS/NiS/C hollow spheres. The synergistic effects between ZnS and NiS on absorbing performances were thoroughly investigated. [Display omitted] Utilizing the synergistic effect of multiple components in heterostructured composites has been regarded as a promising strategy for achieving high-performance electromagnetic wave absorption. Nonetheless, rationally collocate the components of absorbers in order to legitimately achieve synergy remains an intractable problem. By adjusting the NiS and ZnS composition ratios in the ZnS/NiS/C composites, the optimal impedance matching and dissipation capability can be obtained. The formation of a ZnS/NiS heterostructure is found to significantly enhance polarization relaxation, and the relative ratios of ZnS and NiS have a significant effect on the electromagnetic properties. The optimal performance was obtained on Z1N2, with a minimum reflection loss of –51.45 dB at 4.72 GHz and –56.69 dB at 11.12 GHz, respectively, and an effective absorption bandwidth of up to 3.68 GHz at 1.16 mm. The potential of heterogeneous bimetal sulfides as high-performance absorbers is demonstrated in this study. [ABSTRACT FROM AUTHOR]