Search

Injection of nanoscale zero-valent iron (NZVI) is potentially a promising technology for remediation of contaminated groundwaters. However, the efficiency of this process is significantly hindered by the rapid aggregation of the iron nanoparticles. The aim of this study was to enhance the colloidal stability of the nanoparticles through the addition of the "green" polymer guar gum. We evaluated the properties of guar gum and its influence on the surface properties, particle size, aggregation, and sedimentation of iron nanoparticles. Commercial iron nanoparticles were dispersed in guar gum solutions, and their aggregation and sedimentation behaviors were compared to those of bare iron nanoparticles and commercial nanoparticles modified with a biodegradable polymer (polyaspartate). High performance size exclusion chromatography, charge titration, and viscosity assessment showed that guar gum is a high molecular weight polymer which is nearly neutrally charged, rendering it suitable for steric stabilization of the iron nanoparticles. Electrophoretic mobility measurements demonstrated the ability of guar gum to adsorb on the nanoparticles, forming a slightly negatively charged layer. Dynamic light scattering experiments were conducted to estimate the particle size of the different nanoparticle suspensions and to determine the aggregation behavior at different ionic strengths. Guar gum effectively reduced the hydrodynamic radius of the bare nanoparticles from 500 nm to less than 200 nm and prevented aggregation of the nanoparticles even at very high salt concentrations (0.5 M NaCl and 3 mM CaCl(2)). Sedimentation profiles of the different nanoparticle suspensions confirmed the improved stability of the iron nanoparticles in the presence of guar gum. The results strongly suggest that guar gum can be used to effectively deliver stabilized zero-valent iron nanoparticles for remediation of contaminated groundwater aquifers.

The early stage aggregation kinetics of fullerene C60 nanoparticles were investigated in the presence of Suwannee River humic acid and common monovalent and divalent electrolytes through time-resolved dynamic light scattering (DLS). In the absence of humic acid, the aggregation behavior of the fullerene nanoparticles in the presence of NaCl, MgCl2, and CaCl2 was found to be consistent with the classic Derjaguin-Landau-Verwey-Overbeek (DLVO) theory of colloidal stability. In the presence of humic acid and NaCl or MgCl2 electrolytes, the adsorbed humic acid on the fullerene nanoparticles led to steric repulsion, which effectively stabilized the nanoparticle suspension. This behavior manifested in a dramatic drop in the rate of aggregation, an increase in the critical coagulation concentration (CCC), and an attained value of less than unity for the inverse stability ratio (or attachment efficiency) at high MgCl2 concentrations. While the increase in the nanoparticle stability was similarly observed in the presence of humic acid at low CaCl2 concentrations, enhanced aggregation occurred at higher CaCl2 concentrations. Measurement of scattered light intensities over time indicated significant aggregation of the humic acid macromolecules in solutions of high CaCl2 concentrations. Transmission electron microscopy (TEM) imaging of the fullerene aggregate structures in the presence of humic acid revealed that bridging of the fullerene nanoparticles and aggregates by the humic acid aggregates is the likely mechanism for the enhanced aggregation at high CaCl2 concentrations.

The antimicrobial and bacterial anti-adhesive properties of polysulfone (PSU) membranes modified with silver nanoparticles (AgNPs) and polyelectrolyte multilayers (PEMs) composed of poly(allylamine hydrochloride) and poly(acrylic acid) were investigated. The membranes' antimicrobial properties were evaluated using a colony forming unit (CFU) enumeration method, while the anti-adhesive properties of the membranes were examined using a direct microscopy observation membrane filtration system. The AgNP mass loading required for the inhibition of bacterial growth on the AgNP/PEM-modified membranes was significantly lower than the AgNP loadings reported in other studies for membranes with the nanoparticles dispersed within the membrane matrix. The immobilization of AgNPs on the membrane surface maximized the opportunities for bacteria-nanoparticle contact, which allowed for effective bacteria inactivation. Furthermore, in comparison to unmodified PSU membranes, the bacterial deposition kinetics on all the modified membranes were reduced by ca. 50% and the bacterial removal efficiencies were significantly increased from close to 0% to as high as over 90%. Three-cycle filtration and rinsing experiments were also performed to evaluate the effectiveness of the surface modification over an extended time period of use.

Normalization of permeate flux data is widely used to characterize membrane fouling under different experimental conditions. The main intention of normalization is to allow a fair comparison of feed water fouling potentials by eliminating the effects of different operational parameters used in the experiments, such as net driving pressure and clean-membrane resistance. However, it was demonstrated that the commonly used intuitive normalization methods usually could not serve their intended purpose. In this study, a new normalization method was proposed for characterizing water-fouling potential based on fundamental principles of membrane fouling. The intention of this normalization method was to define a fouling potential for feed water that was independent of, or at least, not strongly affected by operational conditions. Laboratory-scale ultrafiltration fouling tests were conducted under different colloid sizes, concentrations, and driving pressures. The experiments showed that the fouling potentials defined by the newly proposed normalization method were linearly related to the colloid concentration of the feed water and that the effect of operational conditions used in the fouling experiments on the fouling potential was minimal.