Search

Due to the excellent mechanical properties and strong design flexibility, the 3D woven composite engine casing shows great potential in high performance fields. This article adopted the method of double-layer weaving and adding yarn to achieve the variable thickness of the 3D woven composite engine casing. The purpose of this article is to study the compression performance and failure mechanism of this variable thickness casing in different thickness zones through experiments and numerical simulations to lay a foundation for future optimization and inclusiveness research on this casing with complex thickness changes. Three types of representative volume cells are established for progressive damage analysis. 3D-Hashin criteria and von-Mises stress criterion are used as damage criteria for yarns and matrix. The progressive damage process and the proportion of damage in the inner and outer layers of three types of 3D woven tubes under axial compression load are analyzed. Results show that the main failure modes of the three types of tubes are yarn-matrix compressive cracking along direction 3 and matrix failure. The damages are mostly concentrated in the warp bending area. The proportions of warp yarn damage in the inner and outer layers of three tubes are different. [ABSTRACT FROM AUTHOR]

A transient-dynamics model based on the approximate Riemann algorithm is proposed for the failure analysis of a frangible composite canister cover. The frangible cover, manufactured with a traditional manual lay-up method, is designed to conduct a simulated missile launch test using a specially developed test device. Deformation of the cover’s centre is determined using a transient-dynamics finite element model; failure pressure for the frangible cover is obtained based on a failure criterion and compared with simulated experimental results. Weak-zone position of the frangible cover has a significant effect on failure pressure compared to that of deformation of the cover’s centre. With the same structure of the weak-zone, an increase in its height can first raise and then reduce the level of failure pressure of the frangible cover. Close agreements between the experimental and numerical results are observed. [ABSTRACT FROM AUTHOR]