Search

Switched inertance hydraulic systems (SIHS) use inductive, capacitive, and switching elements to boost or "buck" (reduce) a pressure from a source to a load in an ideally lossless manner. Real SIHS circuits suffer a variety of energy losses, with throttling of flow during transitions of the high-speed valve resulting in as much as 44% of overall losses. These throttling energy losses can be mitigated by applying the analog of zero-voltage-switching, a soft switching strategy, adopted from power electronics. In the soft switching circuit, the flow that would otherwise be throttled across the transitioning valve is stored in a capacitive element and bypassed through check valves in parallel with the switching valves. To evaluate the effectiveness of soft switching in a boost converter SIHS, a lumped parameter model was constructed. Simulation demonstrates that soft switching improves the efficiency of the modeled circuit by 42% at peak load power and extends the power delivery capabilities by 77%. [ABSTRACT FROM AUTHOR]

Hydraulic applications requiring a variation in the speed or torque of actuators have historically used throttling valve control or a variable displacement pump or motor. An alternative method is switch-mode control that uses a high-speed valve to rapidly switch between efficient on and off states, allowing any hydraulic actuator to have virtually variable displacement. An existing barrier to switch-mode control is a fast and efficient high-speed valve. A novel high-speed valve concept is proposed that uses a phase shift between two tiers of continuously rotating valve spools to achieve a pulse-width modulated flow with any desired duty ratio. An analysis of the major forms of energy loss, including throttling, compressibility, viscous friction, and internal leakage, is performed on a disk spool architecture. This analysis also explores the use of a hydrodynamic thrust bearing to maintain valve clearance. A nonoptimized design example of a phase-shift valve operating at 100 Hz switching frequency at 10 l/min demonstrates an efficiency of 73% at a duty ratio of 1 and 64% at 0.75 duty ratio. Numerous opportunities exist for improving this efficiency including design changes and formal optimization. The phase-shift valve has the potential to enable switch-mode hydraulic circuits. The valve has numerous benefits over existing technology yet requires further refinement to realize its full potential. [ABSTRACT FROM AUTHOR]