Search

Switch-mode hydraulic control is a compact and theoretically efficient alternative to throttling valve control or variable displacement pump control. However, a significant source of energy loss in switch-mode circuits is due to throttling during valve transitions. Hydraulic soft switching was previously proposed as a method of reducing the throttling energy loss, by absorbing, in a small variable volume chamber, the flow that would normally be throttled across the transitioning high-speed valve. An active locking mechanism was previously proposed that overcomes the main challenge with soft switching, which is a lock mechanism that releases quickly and with precise timing. This prior work demonstrated a reduction in energy losses by 66% compared to a control circuit. In this paper, a numerical model is developed for a switch-mode virtually variable displacement pump (VVDP) circuit, utilizing the proposed soft switch. The model is then used as a means of designing a proof of concept prototype to validate the model. The prototype design includes methods for controlling the soft switch spring preload, travel distance, piston displacement required to unlock the soft switch, valve command duty cycle, switching cycle period, and load pressure. Testing demonstrated that the soft switch circuit performed as expected in a baseline condition. The operating region for this prototype was found to be quite narrow. However, the model does a good job of predicting the displacement of the soft switch. [ABSTRACT FROM AUTHOR]

Switched inertance hydraulic systems (SIHS) use inductive, capacitive, and switching elements to boost or "buck" (reduce) a pressure from a source to a load in an ideally lossless manner. Real SIHS circuits suffer a variety of energy losses, with throttling of flow during transitions of the high-speed valve resulting in as much as 44% of overall losses. These throttling energy losses can be mitigated by applying the analog of zero-voltage-switching, a soft switching strategy, adopted from power electronics. In the soft switching circuit, the flow that would otherwise be throttled across the transitioning valve is stored in a capacitive element and bypassed through check valves in parallel with the switching valves. To evaluate the effectiveness of soft switching in a boost converter SIHS, a lumped parameter model was constructed. Simulation demonstrates that soft switching improves the efficiency of the modeled circuit by 42% at peak load power and extends the power delivery capabilities by 77%. [ABSTRACT FROM AUTHOR]