Search

This paper presents a novel harmonic-suppressed microstrip open-loop resonator bandpass filter with the different transmission line characteristic impedance of the feed line and open-loop resonator for wireless local area network (WLAN) application. To improve the stopband rejection of the filter, the dumbbell-shape defected ground structure (DGS) are applied under the feed lines to suppress the harmonics and the equivalent parameters extraction formulations of double-dumbell-shaped DGSs are the first to proposed. The bandpass filter with center frequency of 2.44 GHz were designed and fabricated on a TLX substrate with thickness of 1 mm and dielectric constant of 2.55. Measurement results show the filter has a wide stopband characteristic with 30 dB attenuation up to 7.5 GHz and only has an –1.23 dB insertion loss while it is a little larger than the conventional one. The measured results are in good agreement with the simulated results. It can be widely used for WLAN application. [ABSTRACT FROM AUTHOR]

This paper presents a novel harmonic-suppressed microstrip open loop resonator bandpass filter with defected ground structure (DGS) for wireless local area network (WLAN) application. To improve the stopband rejection of the filter, DGSs are applied under the feed lines to suppress the harmonics. The bandpass filter with center frequency of 2.44 GHz is designed and fabricated on a TLX substrate with thickness of 1 mm and dielectric constant of 2.55. By using two dumbbell-shape DGSs the filter has a wide stopband characteristic with attenuation -25 dB up to 8 GHz and has an -1.25 dB insertion loss while it demonstrates a little larger than the conventional one. The measured results agree well with the simulation results. The proposed filter is found to possess low in-band insertion loss and high out-band suppression, making it suitable in WLAN application. [ABSTRACT FROM AUTHOR]

A novel complementary split-ring resonators (CSRRs) DGS has been investigated theoretically and experimentally. The proposed DGS provides excellent performance in terms of double resonant property, ripple in the pass band, sharp selectivity at the cut-off frequency and spurious free wide stop band. A LPF using the proposed DGS unit is fabricated and three cascaded DGSs are employed in another LPF to obtain very wide reject band. The measured results illustrated the excellent performance. [ABSTRACT FROM AUTHOR]

Modified current model has been developed to more accurately model the current-voltage characteristics of GaAs pHEMTs over a wide range of temperature. In particular, the modeling accuracy of knee, saturation and subthreshold regions has been greatly improved. These results are achieved by introducing the polynomial expression on the bias conditions. The verification is performed by fabricated pHEMTs at different temperature. Good agreement is obtained. [ABSTRACT FROM AUTHOR]

A dielectric half space model is introduced into the simulation of the scattering from ships on sea surface, which is excited by a plane wave. With the acceleration of Generalized Forward-Backward (GFB) method, the electromagnetic (EM) scattering can be simulated quickly in high precision. A High Resolution Range Profile (HRRP) is formed with the results computed in half space model, and the HRRP of ship on ocean in different aspects are discussed. As showed in the simulation, the model predicted in the paper is proved more valid and accurate than free space model. [ABSTRACT FROM AUTHOR]

One of the most critical hardware components for the performance of the Ground-Penetrating Radar (GPR) system is the antenna and the resistive loaded antenna is one of common antennas used in the GPR system. The authors extend the Wu-King linear current distribution to the double exponential current distribution, modify the inaccurate part of the Wu-King loading profile and deduce an improved resistive loading profile with high efficiency. The broadband performance of the improved resistive loading profile has been studied; the concept of lengthening coefficient is created and the optimum parameter designing curve of the antenna is provided. Numerical calculation shows that the maximum bandwidth and efficiency of antenna can be achieved with the improved loading profile simultaneously. The impedance bandwidth is as high as 40:1, which is much greater than the 3:1 bandwidth of Wu-King distribution when the voltage standing wave ratio is below 3. It exhibits better efficiency and bandwidth than Wu-King loading profile. The loading profile can reduce the late-time ringing, enhance the pulse radiation characteristics and be widely applied to other resistive loading antenna for GPR applications. [ABSTRACT FROM AUTHOR]