Search

In this work, Ti-Sn-Sb/γ-Al 2 O 3 particle electrodes were prepared and employed for the degradation of oxytetracycline (OTC) by three-dimensional electrocatalytic technology. Factors associated with the preparation of Ti-Sn-Sb/γ-Al 2 O 3 particle electrodes were investigated. The effects of initial concentration, conductivity, pH value, aeration intensity, current density, plate spacing, and particle electrode dosage on OTC removal were studied. The removal rate of OTC and total organic carbon were achieved approximately 92.0% and 41.0% under the optimal operating condition, respectively. In addition, Ti-Sn-Sb/γ-Al 2 O 3 particle electrode was analyzed by Fourier Transform Infrared spectroscopy (FT-IR), scanning electron microscope (SEM), energy dispersive spectrum analysis (EDX), X-Ray Fluorescence Spectrometer (XRF), and X Ray Diffraction analysis (XRD), which indicated that a significant amount of TiO 2 , SnO 2 , and Sb 2 O 3 were formed on the surface of Ti-Sn-Sb/γ-Al 2 O 3 particle electrode. It was also observed that the primary function of Ti-Sn-Sb/γ-Al 2 O 3 particle electrode in the three-dimensional electrode electrolysis process is the strong oxidizing function of ·OH for degrading OTC. Consequently, the analysis of degradation products of oxytetracycline (OTC) demonstrates. In addition, the results and conclusions of this study provide a methodological basis and engineering practice basis for removing the low concentration of antibiotics in water. Image 1 • Sodium alginate embedding method is used for preparing Ti-Sn-Sb/γ-Al 2 O 3 particle electrode. • Possible degradation mechanism of oxytetracycline is investigated and discussed. • Ti-Sn-Sb/γ-Al 2 O 3 particle electrode shows excellent electrocatalytic oxidation capacity. • It has positive significance for removing low concentration antibiotics in water. [ABSTRACT FROM AUTHOR]