Search

Abstract: Application of microemulsion modified raw date pits as an inexpensive solid extractant for removing methylene blue (MB), copper ion (Cu2+) and cadmium ion (Cd2+) has been presented. The results summarised herein are also part of an investigation conducted to evaluate the adsorption capacity by taking into consideration the experimental parameters such as pH, particle size and initial solute concentration. The experimental data obtained from the adsorption isotherms studies were used to find pollutants distribution factors and modelled using both Langmuir and Freundlich equations. The modified adsorbent was more effective toward all pollutants with high removal capacities (50–350 mg/g) and with very large distribution values (9–235 L/g) which indicates the suitability of this new material for extraction organic and inorganic pollutants. After microemulsion modification, the FTIR scans of the samples show clear differences in the position and intensity the characteristics bands of the raw date pits (RDP). Three mechanisms of the MB, Cu2+ and Cd2+ adsorption onto μE-MDP are possible: (i) adsorption by an electrostatic force of the anionic head group of the surfactant and the positive charge of the dye (MB+) or the metal ions (Cu2+ or Cd2+), (ii) adsorption by tail groups of the surfactant and the hydrophobic character of the MB molecules. The MB is a basic dye and has basic characteristics and therefore is expected to interact strongly with the anionic head groups of the surfactants (RCOO–). In the contrary, the Cu2+ and Cd2+ ions are not expected to interact by the tail groups of the surfactant where the ionic radii of these ions may explain the differences between Cu2+ (0.72 Å) and Cd2+ (0.99 Å) adsorption capacities and (iii) filling the channel (pores) of the RDP by dissolving in the microemulsion micelles. [Copyright &y& Elsevier]

The investigations into structural changes which occur during adsorbent modification and the adsorption mechanisms are essential for an effective design of adsorption systems. Manganese oxides were impregnated onto diatomite to form the type known as δ-birnessite. Initial investigations established the effectiveness of manganese oxides-modified diatomite (MOMD) to remove basic and reactive dyes from aqueous solution. The adsorption capacity of MOMD for methylene blue (MB), hydrolysed reactive black (RB) and hydrolysed reactive yellow (RY) was 320, 419, and 204mg/g, respectively. Various analytical techniques were used to characterise the structure and the mechanisms of the dye adsorption process onto MOMD such as Fourier transform infrared (FTIR), X-ray diffraction (XRD) and atomic absorption spectrometry (A.A.). A small shift to higher values of the d-spacing of dye/MOMD was observed indicating that a small amount of the dye molecules were intercalated in the MOMD structure and other molecules were adsorbed on the external surface of MOMD. Two mechanisms of dye adsorption onto MOMD were proposed; intercalation of the dye in the octahedral layers and adsorption of the dye on the MOMD external surface. Moreover, the results demonstrated that the MOMD structure was changed upon insertion of MB and RY with an obvious decrease in the intensity of the second main peak of the MOMD X-ray pattern. [Copyright &y& Elsevier]