Search

Asymmetric cavitation, in which cavity lengths are unequal on each blade, is known as a source of cavitation induced shaft vibration in turbomachinery. To investigate the relationship of the uneven cavity length and rotordynamic force in a cavitating inducer with three blades, we conducted two experiments. In one, the growth of cavity unevenness at the inception of synchronous rotating cavitation in cryogenic flow was observed, and in the other, the rotordynamic fluid forces in water were examined by using a rotordynamic test stand with active magnetic bearings. Rotordynamic performances were obtained within a wide range of cavitation numbers, and whirl/shaft speed ratios included supersynchronous/synchronous rotating cavitation. These experimental results indicate that the shaft vibration due to the rotating cavitation is one type of self-excited vibrations arising from the coupling of cavitation instability and rotordynamics. [DOI: 10.1115/1.3425727] Keywords: cavitating inducer, rotating cavitation, rotordynamic forces, self-excited vibration, tip clearance

The suppression of cavitation instabilities was attempted through the control of tip leakage vortex cavitation. The control was made by using shallow grooves, called J groove, on the casing wall. With J grooves, the onset regions of the rotating cavitation and the asymmetric cavitation could be diminished. However, a cavitation surge appeared at higher cavitation numbers. From the observation of cavitation, it was found that the cavitation surge occurred when the tip leakage vortex cavitation started to interact with the leading edge of the next blade. This type of cavitation surge could be avoided by extending the leading edge of the J groove upstream. However, in this case, another type of cavitation surge occurred at much lower cavitation numbers, which was caused by the cavitation between the blade surface and the tip leakage vortex cavitation. These results highlight the importance of the tip leakage vortex cavitation for cavitation instabilities. [DOI: 10.1115/1.2829582]