Search

In this work, an efficient magnetic sorbent has been prepared using the extract of Tanacetum leaves and used in magnetic dispersive solid phase extraction of Cu(II) and Pb(II) ions from high volume of milk samples performed in a narrow-bore tube. For this purpose, first, the sorbent was prepared by mixing Fe 3 O 4 magnetic nanoparticles and Tanacetum leaves extract. After precipitation of the milk proteins with trichloroacetic acid, the sedimented compounds were removed and the upper solution was filled into the narrow-bore tube. Then after that, the mg-level of the prepared sorbent was added. After doing the extraction procedure, the sorbent particles were removed from the tube in the presence of a magnetic field. The adsorbed analytes were desorbed by methanol and to achieve low detection limits, the eluent obtained from the first step was subjected to dispersive liquid-liquid microextraction. Finally, the enriched analytes were monitored by flame atomic absorption spectrometry. The important parameters affecting the method efficiency such as the sorbent amount, type and volume of elution and extraction solvents, vortex time, pH, and ionic strength were studied. Under optimized conditions, the proposed method showed linear ranges of 0.50–40 and 0.75–40 µg L−1 for Cu(II) and Pb(II) ions, respectively. Limits of detection were obtained 0.16 and 0.22 µg L−1 for Cu(II) and Pb(II), respectively. Enrichment factors of 182.5 and 173.7 and extraction recoveries of 95.8 % and 91.2 % were obtained for Cu(II) and Pb(II), respectively. The relative standard deviations (intra- and inter-day precisions) for 5 and 25 µg L−1 of each cation were between 2.4 % and 4.3 %. • Tanacetum extract was used for functionalisation of Fe 3 O 4. • The prepared MNPs was used for the extraction of heavy metals from milk. • The MDSPE was combined with a dispersive liquid-liquid microextraction procedure. • The method has low LODs and LOQs, high EFs and ERs. [ABSTRACT FROM AUTHOR]

• An efficient reversed-phase DLLME using a synthesized DES is proposed. • The DES was used for the first time as a disperser solvent in RP-DLLME. • It is the first report on the application of the present method in oily samples. A new, sensitive, and safe pretreatment method for the analysis of Cd(II) and Zn(II) ions in oil samples prior to flame atomic absorption spectrometry was developed. For the first time, a deep eutectic solvent is used as a disperser in reversed-phase dispersive liquid-liquid microextraction procedure. For this purpose, a deep eutectic solvent with low viscosity and miscible with both aqueous and organic phases is prepared by mixing glycolic acid and mandelic acid at a molar ratio of 2:1. The variables involved in this process were studied to provide high enrichment factors. Under optimized conditions, the linear ranges of calibration curves for Cd(II) and Zn(II) ions were obtained 0.30−20 and 0.50−30 μg L−1, respectively. The obtained detection limits and enrichment factors were 0.12 and 0.18 μg L−1; and 32.7 and 32.2 for Cd(II) and Zn(II), respectively. Repeatability of the proposed method, expressed as relative standard deviation, ranged from 2.7 to 4.1 % (n = 6, C = 1 μg L−1 of each cation). Finally, the proposed method was successfully applied for the determination of Cd(II) and Zn(II) concentrations in various oil samples. [ABSTRACT FROM AUTHOR]