Search

The present contribution investigates the possibility to obtain thermospheric neutral density estimates using satellite laser ranging (SLR) observations of low Earth orbiters (LEOs). This approach is based on the analysis of the satellite atmospheric drag, driven by the fact that the drag force is the largest non-gravitational perturbation acting on LEOs. Due to the uncertainty of current thermospheric models, it is the main error source in the LEO orbit determination process. Moreover, the drag is physically related to the thermospheric density distribution, the interaction of the satellite surface with the surrounding thermosphere and thermospheric winds. For this investigation, a spherical satellite called "Atmospheric Neutral Density Experiment-Pollux" (ANDE-P) developed by the Naval Research Laboratory (USA) is adopted as a case study. The satellite flew at the very low altitude of about 350 km. The most important perturbing acceleration at this altitude, the atmospheric drag, is easier to model for a spherical satellite like ANDE-P than for a satellite of complex geometry. A precise orbit determination of ANDE-P was performed with the DGFI Orbit and Geodetic parameter estimation Software (DOGS) over a period of 49 days (16 August 2009 until 3 October 2009) using SLR observations to this satellite and different thermospheric models. In total, we tested four thermospheric models, namely CIRA86, NRLMSISE00, JB2008 and DTM2013. Correspondingly, scale factors of these reference models are estimated with a 6-h resolution. The results confirm that the estimation of force model parameters from SLR measurements of the ANDE-P satellite is sensitive to differences in the density distributions provided by different models. As a consequence, information on the discrepancies between the various models and the true density can be derived from SLR measurements. Moreover, it is found that SLR observations to LEO satellites at very low altitudes are capable to estimate corrections to (scale factors of) the integrated thermospheric density if all other perturbing accelerations are modelled with sufficient accuracy. We derived time series of estimated scale factors of the thermospheric densities provided by the models and obtained the following mean values during the processed period of time at the ANDE-P altitude: 0.65±0.26 for CIRA86, 0.65±0.25 for NRLMSISE00, 0.79±0.24 for DTM2013, and 0.89±0.27 for JB2008. This suggests that all models overestimate the true thermospheric density along the ANDE-P trajectory during the processed period to a certain extent. The thermospheric densities need to be scaled downwards to fit ANDE-P SLR observations with JB2008 requiring the least amount of scaling. [ABSTRACT FROM AUTHOR]

Satellite laser ranging (SLR) is an important technique that contributes to the determination of terrestrial geodetic reference frames, especially to the realization of the origin and the scale of global networks. One of the major limiting factors of SLR-derived reference frame realizations is the datum accuracy which significantly suffers from the current global SLR station distribution. In this paper, the impact of a potential future development of the SLR network on the estimated datum parameters is investigated. The current status of the SLR network is compared to a simulated potential future network featuring additional stations improving the global network geometry. In addition, possible technical advancements resulting in a higher amount of observations are taken into account as well. As a result, we find that the network improvement causes a decrease in the scatter of the network translation parameters of up to 24%, and up to 20% for the scale, whereas the technological improvement causes a reduction in the scatter of up to 27% for the translations and up to 49% for the scale. The Earth orientation parameters benefit by up to 15% from both effects. [ABSTRACT FROM AUTHOR]

In the conventions of the International Earth Rotation and Reference Systems Service (e.g. IERS Conventions 2010), it is recommended that the instantaneous station position, which is fixed to the Earth's crust, is described by a regularized station position and conventional correction models. Current realizations of the International Terrestrial Reference Frame use a station position at a reference epoch and a constant velocity to describe the motion of the regularized station position in time. An advantage of this parameterization is the possibility to provide station coordinates of high accuracy over a long time span. Various publications have shown that residual non-linear station motions can reach a magnitude of a few centimeters due to not considered loading effects. Consistently estimated parameters like the Earth Orientation Parameters (EOP) may be affected if these non-linear station motions are neglected. In this paper, we investigate a new approach, which is based on a frequent (e.g. weekly) estimation of station positions and EOP from a combination of epoch normal equations of the space geodetic techniques Global Positioning System (GPS), Satellite Laser Ranging (SLR) and Very Long Baseline Interferometry (VLBI). The resulting time series of epoch reference frames are studied in detail and are compared with the conventional secular approach. It is shown that both approaches have specific advantages and disadvantages, which are discussed in the paper. A major advantage of the frequently estimated epoch reference frames is that the non-linear station motions are implicitly taken into account, which is a major limiting factor for the accuracy of the secular frames. Various test computations and comparisons between the epoch and secular approach are performed. The authors found that the consistently estimated EOP are systematically affected by the two different combination approaches. The differences between the epoch and secular frames reach magnitudes of $$23.6~\upmu \hbox {as}$$ (0.73 mm) and $$39.8~\upmu \hbox {as}$$ (1.23 mm) for the x-pole and y-pole, respectively, in case of the combined solutions. For the SLR-only solutions, significant differences with amplitudes of $$77.3~\upmu \hbox {as}$$ (2.39 mm) can be found. [ABSTRACT FROM AUTHOR]